Construction of a CC road from Goga house to Yadav house in Ward No. 15, Veer Savarkar Nagar.

Earthwork in excavation of foundation in ordinary soil (loam, clay & sand) including liftupto 1.50 m and lead upto 30 cm including filling, watering and raming of excavated earth into the trenches or in the plinth and removal and disposal of surplus earth as directed by the Eng. including upto a distance of 30 mtr from foundation as per (S.l.No.251)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Class 150 sub class 'A' brick work in 1:4 cement coarse sand mortor in foundation & up to plinth including supply of all materials and tools and plants etc. required for proper completion of the work . As per (S.l.No305)

Providing and laying of 125 micron thick polythine sheet.

Laying C.C road slab 10cm (4"0 thick consisting of 1:1.5:3 cement, coarse sand & approved 2 cm gauge stone grit, over prepared sub grade after its rectifications & bringing it to proper camber and including supply of all materials, labour T&P etc. required for proper completion of work, finished to required templete as directed by E/I. but excluding cost of metal required for reflection of the sub-grade. Take a slab length of 33 rft and 4" in denth S.l.No 773A

Construction of contraction joint and Expantion joint including all as per direction of engineer incharge.

R.C.C work with cement approved coarse sand and 2cm gauge stone girt in the propotion of 1:1:5:3 (M-20) in plinth band excluding supply of reinforcement and its bending but including fixing and bending the same with 24.B.W.G.G.l banding wire and including necessary centering and shuttring etc. & also including supply of all materilas, labour and T&P etc. required for proper completion of work as per S.l.No 282

Mild steel of iron work in plain work such as in reinforced concreate or reinforced brick work (When not included in overall rate) wrought to required shapes as necessary and bending for the proper completion of work including supply of steel and its wastages and all labour and T&P required for proper completion of work note the steel shall bent cold and all bends hooks and authorised over lapping shall be measured as per S.l. No 504

Earth work in cutting or in embankment ordinary soil (loam, clay or sand) excavation to be in the from of pit not exceeding 50 cm. in depth and earthwork in embankment to be in 20 cm. layers including the raming and dressing the surface to required leves slopes and also 1.50 meter lift and 30 mt. lead. The earth from cutting to be used in making embankment or to be deposited as spoil bank withen 30 mt. distance as directed by the Engineer Incharged per S.l.No 253

Supply and fixing of sign board made of M.S angle iron including supply and cost of all materils labours T & P etc. required templet as directed by the Engineer In charge.