Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 27 K M SURAT HAZIRA ROAD HAZIRA GUJARAT HAZIRA 27 K M STONE SURAT HAZIRA ROAD HAZIRA SURAT GUJARAT 394270 | SURAT | GUJARAT | 394270 | Admitted-Finance |
| 2 | Admitted-Finance KHARSIA ROAD RAIGARH | RAIGARH | RAIGARH | CHHATTISGARH | 496001 | Admitted-Finance |
| 3 | Admitted-Finance BANDRA KURLA COMPLEX BANDRA EAST BANDRA EAST BANDRA EAST MUMBAI SUBURBAN MAHARASHTRA 400051 | MUMBAI SUBURBAN | MAHARASHTRA | 400051 | Admitted-Finance |
| 4 | Admitted-Finance ISPAT BHAWAN LODHI ROAD CENTRAL DELHI CENTRAL DELHI DELHI 110003 | NEW DELHI | DELHI | 110003 | Admitted-Finance |
| 5 | Admitted-Finance 24 HOMI MODY STREET FORT MUMBAI MAHARASHTRA 400001 | MUMBAI | MAHARASHTRA | 400001 | Admitted-Finance |
| Sl No | Description | Qty | Unit | TATA Steel | JSW Steel Limited | JINDAL STEEL LIMITED | ARCELORMITTAL NIPPON STEEL INDIA PRIVATE LIMITED | STEEL AUTHORITY OF INDIA LIMITED |
|---|---|---|---|---|---|---|---|---|
| 1.00 | CR COIL 0.63X850 IS 513 CR3 DD TDC:RTA:408:R04; 0.63 X 850 X Coil form [T X W X L] [mm] | 200 | MT | - | 67,152 ₹1,34,30,400 Lowest | - | - | - |
| 2.00 | GP Sheet 0.63 mm Class VIII IS 277; 0.63 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm] | 100 | MT | - | - | - | 99,200 ₹99,20,000 Lowest | - |
| 3.00 | CR COIL 0.80X850 IS 513 CR3 DD POS TOL TDC:RTA:410:R00; 0.8 X 850 X Coil form [T X W X L] [mm] | 900 | MT | - | 67,152 ₹6,04,36,800 Lowest | - | - | - |
| 4.00 | CR COIL 0.80X850 IS 513 CR3 DD TDC:RTA:408:R04; 0.8 X 850 X Coil form [T X W X L] [mm] | 50 | MT | - | 67,152 ₹33,57,600 Lowest | - | - | - |
| 5.00 | CR COIL 0.80X750 IS 513 CR3 DD POS TOL TDC:RTA:410:R00; 0.8 X 750 X Coil form [T X W X L] [mm] | 388 | MT | 67,411 ₹2,61,55,468 | 67,152 ₹2,60,54,976 Lowest | - | - | - |
| 6.00 | CR COIL 0.80X650 IS 513 CR3 DD TDC:RTA:408:R04; 0.8 X 650 X Coil form [T X W X L] [mm] | 50 | MT | 67,411 ₹33,70,550 | 67,152 ₹33,57,600 Lowest | - | - | - |
| 7.00 | CR COIL 0.80X300 IS 513CR3 DD POS TOL TDC:RTA:410:R00; 0.8 X 300 X Coil form [T X W X L] [mm] | 50 | MT | 67,411 ₹33,70,550 | 67,152 ₹33,57,600 Lowest | - | - | - |
| 8.00 | CR COIL 0.80X300 IS 513 CR3 DD TDC:RTA:408:R04; 0.8 X 300 X Coil form [T X W X L] [mm] | 120 | MT | 67,411 ₹80,89,320 | 67,152 ₹80,58,240 Lowest | - | - | - |
| 9.00 | 1.0 MM X 1250 MM X 2500 MM CRC STEEL SHEETS ANNEALED TO SPECIFICATION AA 10115 REV-09 (IS 513 CR2 KLD); 1 X W=1250 X L=2500 [T X W X L] [mm] | 35 | MT | - | - | - | 74,700 ₹26,14,500 | 69,094.83 ₹24,18,319.18 Lowest |
| 10.00 | COLD ROLLED COIL 1.25 X 903 IS 513 GR.CR3; 1.25 X 903 X Coil form [T X W X L] [mm] | 7,300 | MT | - | 66,902 ₹48,83,84,600 Lowest | - | - | 70,364.88 ₹51,36,63,645.36 |
Tender Value
Refer Docs
Closing Date
31 Mar 2026, 2:00 pmClosed
N C Sharma
Noida
Framework Agreement for supply of Steel Plates and Sheets in Q1 of FY 2026-27
2026_BHEL_59248_1
2026Q1STEELPLTSHT
Open Tender
Miscellaneous Goods
Supply
60 days
AS PER NIT
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
15 Apr 2026
11 Mar 2026
31 Mar 2026
11 Mar 2026
31 Mar 2026
11 Mar 2026
CR COIL 0.63X850 IS 513 CR3 DD TDC:RTA:408:R04; 0.63 X 850 X Coil form [T X W X L] [mm]
GP Sheet 0.63 mm Class VIII IS 277; 0.63 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
CR COIL 0.80X850 IS 513 CR3 DD POS TOL TDC:RTA:410:R00; 0.8 X 850 X Coil form [T X W X L] [mm]
CR COIL 0.80X850 IS 513 CR3 DD TDC:RTA:408:R04; 0.8 X 850 X Coil form [T X W X L] [mm]
CR COIL 0.80X750 IS 513 CR3 DD POS TOL TDC:RTA:410:R00; 0.8 X 750 X Coil form [T X W X L] [mm]
CR COIL 0.80X650 IS 513 CR3 DD TDC:RTA:408:R04; 0.8 X 650 X Coil form [T X W X L] [mm]
CR COIL 0.80X300 IS 513CR3 DD POS TOL TDC:RTA:410:R00; 0.8 X 300 X Coil form [T X W X L] [mm]
CR COIL 0.80X300 IS 513 CR3 DD TDC:RTA:408:R04; 0.8 X 300 X Coil form [T X W X L] [mm]
1.0 MM X 1250 MM X 2500 MM CRC STEEL SHEETS ANNEALED TO SPECIFICATION AA 10115 REV-09 (IS 513 CR2 KLD); 1 X W=1250 X L=2500 [T X W X L] [mm]
COLD ROLLED COIL 1.25 X 903 IS 513 GR.CR3; 1.25 X 903 X Coil form [T X W X L] [mm]
CR sheet 1.6 mm IS 513 CR2 - KLD; 1.6 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
HR Sheets 1.6 mm IS 1079 Gr.HR2 SK/K; 1.6 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
HR Sheet 2 mm IS 5986 Gr 205; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
CR sheet 2.0 mm IS 513 CR2 - KLD; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
CR sheet 2.0 mm IS 513 CR2 - KLD; 2 X 1250 X 2500 [T X W X L] [mm]
HR Sheets 2 mm IS 1079 Gr.HR2 SK/K; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
HR Sheets 2.5 mm IS 1079 Gr.HR2 SK/K; 2.5 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
3.0 MM X 1250 MM X 2500 MM CRC STEEL SHEETS ANNEALED TO SPECIFICATION AA 10115 REV-09 (IS 513 CR2 KLD); 3 X W=1250 X L=2500 [T X W X L] [mm]
HR Sheet 3.15 mm IS 5986 Gr 205; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
HR Sheets 3.15 mm IS 1079 Gr.HR1 SK/K; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
HR Sheets 3.15 mm IS 1079 Gr.HR2 SK/K; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
HR Sheet 4.0mm IS 5986 Gr 205; 4 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
HR Sheets 4 mm IS 1079 Gr.HR1 SK/K; 4 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
HR Sheets 4 mm IS 1079 Gr.HR2 SK/K; 4 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
Pl 5 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 5 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
Pl 5 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 5 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
CQ Pl 5 mm IS 3502; 5 X 900 ≤ W ≤ 1250 X L ≤ 6300 [T X W X L] [mm]
Pl 5 mm IS2062 E250 Gr BR/K; TDC:301 ; 5 (T) x 2000 (W) x (6300-12000) (L) [mm]; 5 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 5 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 5 (T) x 2000 (W) x (6300-12000) (L); 5 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 5 mm IS2062 E250 Gr BR/K TDC:386; 5 (T) x 1500 ≤ W ≤ 1800 (W) x (6300-12000) (L) [mm]; 5 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 6 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 6 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
Pl 6 mm IS2062 E350 Gr B0/K TDC:301; 6 (T) x 1500 ≤ W ≤ 1800 (W) x (6300-12000) (L) [mm]; 6 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 6 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 6 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
CQ Pl 6 mm IS 3502; 6 X 900 ≤ W ≤ 1250 X L ≤ 6300 [T X W X L] [mm]
Pl 6 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 6 (T) x 2000 (W) x (6300-12000) (L) mm; 6 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 7 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 7 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
Pl 8 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12; 8 X 2500 X L= 6300 [T X W X L] [mm]
Pl 8 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 8 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 8 mm IS 2062 E250Br/K TDC:6:386, width 2000mm, length 12000mm; 8 X 2000 X 12000 [T X W X L] [mm]
Pl 8 mm IS2062 E350 Gr B0/K TDC:386; 8 (T) x 2000 (W) x (6300-12000) (L) [mm]; 8 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
CQ Pl 8 mm IS 3502; 8 X 900 ≤ W ≤1250 X L ≤ 6300 [T X W X L] [mm]
Pl 8 mm IS2062 E250 Gr BR/K TDC:301; 8 (T) x 3350 (W) x 6500 (L) [mm]; 8 X 3350 X 6500 [T X W X L] [mm]
Pl 8 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 8 (T) x 2000 (W) x (6300-12000) (L) mm; 8 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 8 mm IS2062 E250 Gr BR/K TDC:386; 8 (T) x 2500 (W) x (6300-12000) (L) [mm]; 8 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 8 mm IS 2062 E250Br/K TDC:6:386,; 8 X 2500 X 12000 [T X W X L] [mm]
Pl 10 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 10 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
Pl 10 mm IS2062 E250 Gr BR/SK/K TDC 301 + UST as per ASTM A578 Level B, width 2500 mm, length 10000 mm; 10 X W = 2500 X L = 10000 [T X W X L] [mm]
Pl 10 mm IS 2062 E250Br/K TDC 301 , width 2000mm, length 12000 mm; 10 X 2000 X 12000 [T X W X L] [mm]
PI 10 mm IS2062 E350 Gr BR TDC 301 Rev 12; 10 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 10 mm IS2062 E350 Gr B0/K TDC:301; 10 (T) x 2500 (W) x (6300-12000) (L); 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 10 mm IS2062 E350 Gr B0/K TDC:301; 10 (T) x 2000 (W) x (6300-12000) (L); 10 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 10 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 10 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 10 mm IS 2062 E250Br/K TDC:6:386, width 1500mm, length 6300mm; 10 X 1500 X 6300 [T X W X L] [mm]
Pl 10 mm IS 2062 E250Br/K TDC:6:386, width 2000mm, length 12000mm; 10 X 2000 X 12000 [T X W X L] [mm]
Pl 10 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 10000mm; 10 X 2500 X 10000 [T X W X L] [mm]
Pl 10 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 10 (T) x 2000 (W) x (6300-12000) (L) mm; 10 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Plate 10 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 10 (T) x 2000 (W) x 9000 (L) mm; 10 X 2000 X 9000 [T X W X L] [mm]
Pl 10 mm IS2062 E250 Gr BR/K TDC:386; 10 (T) x 2500 (W) x (6300-12000) (L) [mm]; 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 12 mm IS2062 E350 Gr BR/K TDC:386; 12 (T) x 2500 (W) x (6300-12000) (L) [mm; 12 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 12 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 12 X W= 2500 X 1000 ≤ L ≤ 12500 [T X W X L] [mm]
Pl 12 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12; 12 X 2500 X L= 6300 [T X W X L] [mm]
Pl 12 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 12 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 12 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 12 X 2500 X 12000 [T X W X L] [mm]
CQ Pl 12 mm IS 3502; 12 X 900 ≤ W ≤ 1250 X L ≤ 6300 [T X W X L] [mm]
Pl 12 mm IS2062 E350 Gr BR/K TDC:301; 12 (T) x 2000 (W) x (6300-12000) (L) [mm]; 12 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 12 mm IS2062 E350 Gr B0/K TDC:386; 12 (T) x 2500 (W) x (6300-12000) (L) [mm]; 12 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
PLT BQ 12 MM (SA516 GR 70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test (Sl. No. 5 of Annexure-1 of AA10403); 12 mm x 2500 mm x 7500 mm: T X W X L (mm); 12 X 2500 X 7500 [T X W X L] [mm]
Pl 12.7 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 12.7 X 3750 X 5850 [T X W X L] [mm]
Pl 16 mm IS2062 E250 Gr BR/K TDC 301 Rev 12; 16 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
Pl 16 mm IS2062 E350 Gr BR/K TDC:301; 16 (T) x 2000 (W) x (6300-12000) (L) [mm; 16 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 16 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 16 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 16 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 16 X 2500 X 12000 [T X W X L] [mm]
Pl 16 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 16 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 16 X 2500 X L= 6300 [T X W X L] [mm]
Pl 16 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 16 (T) x 2500 (W) x (6300-12000) (L) mm; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 16 mm IS2062 E350 Gr B0/K TDC:386; 16 (T) x 2500 (W) x (6300-12000) (L) [mm]; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
PL 16 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 16 x 2500 x 5700 [T X W X L] [mm]; 16 X 2500 X 5700 [T X W X L] [mm]
PL 16 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 16 mm x 2500 mm x 6500 mm : T X W X L (mm); 16 X 2500 X 6500 [T X W X L] [mm]
PLT BQ 16 MM (SA516 GR 70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test (Sl. No. 5 of Annexure-1 of AA10403); 16 mm x 2500 mm x 13000 mm: T X W X L (mm); 16 X 2500 X 13000 [T X W X L] [mm]
PLATE 16.0 MM - SA515GR70; 16 X 2000 X 6375 [T X W X L] [mm]
Pl 20 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 20 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
Pl 20 mm IS2062 E350 Gr B0/K TDC:301; 20 (T) x 2000 (W) x (6300-12000) (L); 20 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
PLATE 20.0 MM; IS2062E350 GR B0; TDC:6:386:REV:03: 20 x 2500 x (10000-12000) (T x W x L) mm; 20 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 20 mm IS2062 E350 Gr BR/K TDC:301; 20 (T) x 2000 (W) x (6300-12000) (L) [mm]; 20 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 20 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 16 (T) x 2500 (W) x (6300-12000) (L) mm; 20 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 20 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 20 x 2500 x 7100 [T X W X L] [mm]; 20 X 2500 X 7100 [T X W X L] [mm]
Pl 20 mm IS2062 E350 Gr B0/K TDC:386; 20 (T) x 2500 (W) x (6300-12000) (L) [mm]; 20 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
PL 20 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 20 mm x 3200 mm x 8000 mm: T X W X L (mm); 20 X 3200 X 8000 [T X W X L] [mm]
PLT BQ 20 MM (SA516 GR 70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test (Sl. No. 5 of Annexure-1 of AA10403); 20 mm x 2500 mm x 12500 mm: T X W X L (mm); 20 X 2500 X 12500 [T X W X L] [mm]
PLATE 20 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 20 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
PLATE 22 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 22 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
Pl 25 mm IS2062 E350 Gr BR/K TDC:386; 25 (T) x 2500 (W) x (6300-12000) (L) [mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 25 mm IS2062 E250 Gr BR/K TDC 301 Rev 12; 25 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
Pl 25 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435; 25 X 2500 X 8000< L < 12500 [T X W X L] [mm]
Pl 25 mm IS2062 E350 Gr BR/K TDC:301; 25 (T) x 2500 (W) x (6300-12000) (L) [mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 25 mm IS2062 E350 Gr BR/K TDC:301; 25 (T) x 2000 (W) x (6300-12000) (L) [mm]; 25 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 25 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 6300mm; 25 X 2500 X 6300 [T X W X L] [mm]
PI 25 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 25 X W= 2500 X L= 12000 [T X W X L] [mm]
Pl 25 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 25 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 25 X 2500 X L= 6300 [T X W X L] [mm]
PL.25 x 2500 x 12000 is 2062 E250 Gr. Br. TDC 6 386 Rev.03; 25 X 2500 X 12000 [T X W X L] [mm]
Pl 25 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 25 (T) x 2500 (W) x (6300-12000) (L) mm; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
PL25 E250GR-BR/K TDC:6:386; 25X3100X12000 ; T (mm) x W (mm) x L (mm); 25 X 3100 X 12000 [T X W X L] [mm]
Pl 25 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 25 x 3200 x 12800 [T X W X L] [mm]; 25 X 3200 X 12800 [T X W X L] [mm]
Pl 25 mm IS2062 E350 Gr B0/K TDC:386; 25 (T) x 2500 (W) x (6300-12000) (L) [mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
PL 25 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 25 X 2000≤ W ≤2500 X 8000 ≤ L ≤12500 [T X W X L] [mm]
PLATE 25.0 MM - SA515GR70; 25 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [mm]
PLATE 25 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 25 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
PLT BQ 25 MM (SA516 GR70) TDC: AA10403 +IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403)+ SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 25 x 2500 x 13000 [T X W X L] [mm]; No. of cycles required in SHT: 01 no.; 25 X 2500 X 13000 [T X W X L] [mm]
PI 28 mm IS2062 E350 Gr BR TDC 301 Rev 12; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 28 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 28 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 28 X W= 2500 X L= 12000 [T X W X L] [mm]
Pl 28 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 28 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 28 X 2500 X L= 6300 [T X W X L] [mm]
PLT BQ 28 MM (SA516 GR70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403)+ SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 28 x 2500 x 13000 [T X W X L] [mm]; No. of cycles required in SHT: 01 no.; 28 X 2500 X 13000 [T X W X L] [mm]
PI 30 mm IS2062 E250 GR BR TDC:6:386 Rev 03; 30 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 30 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435; 30 (T) x 2500 (W) x 10000 (L) [mm]; 30 X 2500 X 10000 [T X W X L] [mm]
PL 30 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 4000 ; L= 6750;[Thickness, Length (L) & Width (W) are in mm]; 30 X 4000 X 6750 [T X W X L] [mm]
PLATE 30.0 MM - SA515GR70; 30 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [mm]
PLATE 30 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 30 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
PL 30 mm IS 2002 GRADE-2; TDC: AA10401; W = 2500 ; L= 8000; [Thickness, Length (L) & Width (W) are in mm]; 30 X 2500 X 8000 [T X W X L] [mm]
Pl 32 mm IS2062 E250 Gr A/BR/SK/K TDC:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
Pl 32 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 32 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
Pl 32 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12; 32 X 2500 X L= 6300 [T X W X L] [mm]
Pl 32 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435, width 3000 mm, length 7000 mm; 32 X W = 3000 X L = 7000 [T X W X L] [mm]
PLATE-32 IS2062 E250BR TDC:301 Rev 12; 32 X 2500 X 12000 [T X W X L] [mm]
Pl 32 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435,width 2500 mm, length 12500 mm; 32 X W = 2500 X L = 12500 [T X W X L] [mm]
PI 32 mm IS2062 E350 Gr BR TDC 301 Rev 12; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 32 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
PI 32 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 32 X W= 2500 X L= 12000 [T X W X L] [mm]
Pl 32 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 32 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 32 X 2500 X L= 6300 [T X W X L] [mm]
PL32 E250GR-BR/K TDC:6:386; 32X2650X11100 ; T (mm) x W (mm) x L (mm); 32 X 2650 X 11100 [T X W X L] [mm]
PL 32 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 32 X 2000≤ W ≤2500 X 8000 ≤ L ≤12500 [T X W X L] [mm]
PL 32 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 32 mm x 2500 mm x 6500 mm : T X W X L (mm); 32 X 2500 X 6500 [T X W X L] [mm]
PL 32 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 32 mm x 3200 mm x 12500 mm: T X W X L (mm); 32 X 3200 X 12500 [T X W X L] [mm]
PLT BQ 32MM (SA516 GR70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403)+ SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 32 X 2500 X 10000 [T X W X L] [mm]; No. of cycles required in SHT: 01 no.; 32 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
PLATE 35.0 MM - SA515GR70; 35 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [mm]
PLATE 35 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 35 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
Pl 36 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435, width 2500mm, length 12500mm; 36 X W=2500 X L =12500 [T X W X L] [mm]
PI 36 mm IS2062 E350 Gr BR/K TDC 301 Rev 12; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 36 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 36 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 36 X 4500 X 8500 [T X W X L] [mm]
Pl 36 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 36 X W= 2500 X L= 12000 [T X W X L] [mm]
PL 36 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 36 mm x 3200 mm x 12500 mm: T X W X L (mm); 36 X 3200 X 12500 [T X W X L] [mm]
Pl 40 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 40 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435, width 2500mm, length 12000mm; 40 X W=2500 X L =12000 [T X W X L] [mm]
PI 40 mm IS2062 E350 Gr BR TDC 301 Rev 12; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 40 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 40 X W= 3800 X L= 5700 [T X W X L] [mm]
Pl 40 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 40 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 40 X 2500 X 12000 [T X W X L] [mm]
Pl 40 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 40 X W= 2500 X L= 12000 [T X W X L] [mm]
PLATE 40 MM; IS2062 E250GRBr; TDC:6:386:REV:03: 40 x 2500 x (10000-12000) (T x W x L) mm; 40 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
HR PLATE 40 mm, IS2062 E250 Gr BR/K TDC:386; 40 (T) x 2750 (W) x 12000 (L) [mm]; 40 X 2750 X 12000 [T X W X L] [mm]
Pl 40 mm IS2062 E350 Gr BR/K TDC 301 + UST as per ASTM A435; 40 (T) x 2500 (W) x 12000 (L) [mm]; 40 X 2500 X 12000 [T X W X L] [mm]
PL 40 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 40 mm x 2850 mm x 8500 mm: T X W X L (mm); 40 X 2850 X 8500 [T X W X L] [mm]
PLATE 40 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 40 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
PL 40 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 40 X 2500 X 6300 [T X W X L] [mm]
PL 40 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 40 X 2500 X 8400 [T X W X L] [mm]
Pl 45 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 45 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 45 mm IS2062 E250 Gr Br.K TDC 301 Rev 12;45 x 2500 x 6300-12000; ( T x W x L) mm; 45 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 45 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 45 X W= 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 45 mm IS 2062 E350B0 TDC:6:386, width 2000 - 2500 mm, length 8000- 12000 mm; 45 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 45 mm IS 2062 E350B0 TDC:6:386, width 2500mm, length 12000mm; 45 X 2500 X 12000 [T X W X L] [mm]
PL 45 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 45 mm x 2500 mm x 6500 mm : T X W X L (mm); 45 X 2500 X 6500 [T X W X L] [mm]
PL 45 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1) + bend test as per ASTM A 20); 45 mm x 2500 mm x (8000-12000) mm: T X W X L (mm); 45 X 2500 X 8000-12000 [T X W X L] [mm]
Pl 50 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 50 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
Pl 50 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 50 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 50 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 50 X 2500 X 12000 [T X W X L] [mm]
PI 50 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 50 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 50 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 50 X W= 2500 X L= 12000 [T X W X L] [mm]
PL 50 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 50 X 2500 X 6000< L < 12000 [T X W X L] [mm]
PL 50 MM A516 GRADE-70; TDC: AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test (Sl. No. 5 of Annexure-1); 50 mm x 3200 mm x 6300 mm: T X W X L (mm); 50 X 3200 X 6300 [T X W X L] [mm]
PLATE 50 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 50 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
Pl 56 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 56 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 56 mm IS2062 E250 Gr BR/K TDC 301, width 2500mm, length 8000mm; 56 X W=2500 X L =8000 [T X W X L] [mm]
Pl 56 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 56 X 2500 X 12000 [T X W X L] [mm]
PLATE 56 MM; IS2062 E250GR Br; TDC::301:REV:12: 56 x 2500 x (10000-12000) (T x W x L) mm; 56 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
PL 56 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 56 X 2500 X 8000 ≤ L ≤12500 [T X W X L] [mm]
PL 56 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 56 X 2500 X 6300 [T X W X L] [mm]
PI 60 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 60 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 63 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 63 mm IS2062 E250 Gr BR/K TDC 301, width 2500mm, length 8000mm; 63 X W=2500 X L =8000 [T X W X L] [mm]
Pl 63 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 63 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 63 X 2500 X 12000 [T X W X L] [mm]
PL 63 IS 2062 E250GR-BR/K, TDC:301, 63 X 1875 X 9000 [T X W X L] [mm]; 63 X 1875 X 9000 [T X W X L] [mm]
PLATE 63 MM; IS2062 E350GR Br; TDC::301:REV:12: 63 x 2500 x (10000-12000) (T x W x L) mm; 63 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
PLATE 63.0 MM; IS2062E250 GR Br.; TDC:6:386:REV:03: 63 x 2500 x (10000-12000) (T x W x L) mm; 63 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
PL 63 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 3600 ; L= 7800;[Thickness, Length (L) & Width (W) are in mm]; 63 X 3600 X 7800 [T X W X L] [mm]
PL 63 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 63 X 2500 X 8000 ≤ L ≤12500 [T X W X L] [mm]
PL 63 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 63 mm x 2500 mm x 6500 mm : T X W X L (mm); 63 X 2500 X 6500 [T X W X L] [mm]
PL 63 MM A516 GRADE-70; TDC: AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test (Sl. No. 5 of Annexure-1); 63 mm x 3200 mm x 6300 mm: T X W X L (mm); 63 X 3200 X 6300 [T X W X L] [mm]
Pl 70 mm IS 2062 E 250 Gr A/BR/SK/K; 70 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 70 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 70 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
PL 70 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 70 X 2500 X 8000 ≤ L ≤12500 [T X W X L] [mm]
PL 70 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 70 mm x 3200 mm x 6300 mm: T X W X L (mm); 70 X 3200 X 6300 [T X W X L] [mm]
PLATE 70 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 70 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
Pl 75 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 75 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
PI 80 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 80 X W= 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
PL 80 IS 2062 E250GR-BR/K, TDC:301, 80 X 2500 X 7650 [T X W X L] [mm]; 80 X 2500 X 7650 [T X W X L] [mm]
Pl 80 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435; 80 (T) x 2800 (W) x 11200 (L) [mm]; 80 X 2800 X 11200 [T X W X L] [mm]
Pl 80 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 80 x 2850 x 10700 [T X W X L] [mm]; 80 X 2850 X 10700 [T X W X L] [mm]
PL 80 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2500 ; L= 8000-10000 ;[Thickness, Length (L) & Width (W) are in mm]; 80 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
PL 80 MM A516 GRADE-70; TDC: AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test (Sl. No. 5 of Annexure-1); 80 mm x 3200 mm x 6300 mm: T X W X L (mm); 80 X 3200 X 6300 [T X W X L] [mm]
Pl 90 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 90 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
PL 90 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 90 mm x 2500 mm x 6300 mm: T X W X L (mm); 90 X 2500 X 6300 [T X W X L] [mm]
PI 100 mm IS2062 E250 Gr BR TDC 301 Rev 12;UT: ASTM A578 Level A/SA435; 100 X 2500 X 6000-12000 [T X W X L] [mm]
Pl 100 mm IS 2062 E250 Gr BR; 100 X 2500 X 6000< L < 12000 [T X W X L] [mm]
Pl 100 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 100 x 2500 x 6000 [T X W X L] [mm]; 100 X 2500 X 6000 [T X W X L] [mm]
PL 100 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2200 ; L= 4800;[Thickness, Length (L) & Width (W) are in mm]; 100 X 2200 X 4800 [T X W X L] [mm]
PL 100 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 100 mm x 2500 mm x 6300 mm: T X W X L (mm); 100 X 2500 X 6300 [T X W X L] [mm]
Pl 110 mm IS 2062 E 250 Gr A/BR/SK/K; 110 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 110 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;110 x 2500 x 6300-12000; ( T x W x L) mm; 110 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 110 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 110 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
Pl 110 mm IS2062 E350 Gr BR/K TDC:301; 110 (T) x 2850 (W) x (6300-12000) (L) [mm]; 110 X 2850 X 6300 ≤ L ≤ 12600 [T X W X L] [mm]
PL 110 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 1650 ; L= 8000;[Thickness, Length (L) & Width (W) are in mm]; 110 X 1650 X 8000 [T X W X L] [mm]
PL 110 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 110 X 2000≤ W ≤2500 X 6000 ≤ L ≤ 8000 [T X W X L] [mm]
PI 125 mm IS2062 E250 Gr BR TDC 301 Rev 12;UT: ASTM A578 Level A/SA435; 125 X 2500 X 6000-12000 [T X W X L] [mm]
Pl 130 mm IS 2062 E 250 Gr BR/K TDC:6:386 Rev 03; 130 X 1800 X 5600 [T X W X L] [mm]
PI 140 mm IS2062 E250 Gr BR TDC 301 Rev 12;ASTM A435; 140 X 2500 X 6000-12000 [T X W X L] [mm]
PL 140 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2000 ; L= 10500;[Thickness, Length (L) & Width (W) are in mm; 140 X 2000 X 10500 [T X W X L] [mm]
Pl 155 mm IS 2062 E 250 Gr BR/K TDC:6:386 Rev 03; 155 X 1800 X 5600 [T X W X L] [mm]
PI 160 mm IS2062 E250 Gr BR TDC 301 Rev 12;ASTM A435; 160 X 2500 X 6000-12000 [T X W X L] [mm]
stage.html
html • 0.04 MB
technical_64119.pdf
techsummary_64119.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.96 MB
BOQ_64119.xls
BOQ • 0.65 MB
Corrigendum_3.pdf
PDF • 0.67 MB
Corrigendum_2.pdf
PDF • 0.70 MB
Corrigendum_1.pdf
PDF • 0.66 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].