NIT NO: 5276/Tech.-11/NPN/CHIRIMIRI/2026, Dt. 18.08.2026

OFFICE OF THE MUNICIPAL CORPORATION CHIRIMIRI, MCB (C.G.)

DEVELOPMENT OF AUDITORIUM BESIDE GOVT. LAHIRI PG COLLEGE CHIRMIRI.

AS PER CG PWD BUILDING SOR W.E.F.- 01-01-2015 & PWD ROAD SOR W.E.F.- 01-01-2015 & E&M 01-06-2020

S.NO. CODE PARTICULAR QTY. UNIT

1 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).

2 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1.1.1 In all types of soils. 642.03 CUM

3 Extra for every additional lift of 1.5 m or part thereof.

1.6.1 All types of soils 245.42 CUM

4 Extra rate for lead for every 50m lead or part thereof and upto 150 m beyond 50 m free lead and 1.5 m free lift by manual means only.

1.9.1 1.9.1 For Soils 192.05 CUM

5 1.7 Extra rate for quantity of work executed in or under water and/ or liquid mud including pumping out water. 128.41 CUM

6 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 449.98 CUM

7 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 977.16 CUM

8 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 239.68 CUM

9 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 1003.69 CUM

10 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 852.86 CUM

11 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 120443.22 KG

12 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 1263.04 SQM

2.1.8 Beams, lintels, cantilevers & walls 1574.78 SQM

2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 744.40 SQM

2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 3118.58 SQM

2.1.13 Weather shade, chhajja, Cornices and mouldings 63.56 SQM

2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings 765.93 SQM

13 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) 54.42 CUM

14 7.5.4 + 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 487.37 CUM

15 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level:

7.11.1 Cement Mortar 1:3 (1 cement : 3 coarse sand) 124.72 SQM

16 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. 4.60 CUM

17 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) 647.00 SQM

18 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 4109.49 SQM

19 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 6436.74 SQM

20 Providing and making moulded mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width:

11.33.2 18 mm thick 850.00 MTR

21 7.19 Moulding and cornices with brick masonry using bricks of crushing strength not less than 35 kg/sqcm and water absorption not more than 20% in cement Mortar 1:4 (1 cement 4 coarse sand) including cement plaster 15 mm thick, 10 cm projected, 20 cm deep (40 cm Girth) in cement mortar 1:4 (1 cement : 4 fine sand) at any floor.

22 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer.

23 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.

8.12.2 35 mm. thick (single leaf) 198.87 SQM

24 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately).

9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 915.00 KG

9.47.1 For fixed portion 732.00 KG

25 9.46 Extra for powder coating (minimum 50 micron) on steel sections instead of red oxide zinc chromate primer

26 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):

9.51.1 With float glass panes of 4 mm thickness 91.50 SQM

27 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.

28 Providing and fixing antique/ SS finished brass sliding door bolt with necessary bolts, nuts and antique/ SS polished MS screw complete:

29 Providing and fixing antique/ SS finished brass tower bolts (Barrel type) with antique/ SS polished MS screw complete:

30 8.90 Providing & fixing 150mm antique/ SS finished brass floor door stopper with rubber cushion and antique/ SS polished MS screw complete to suit the shutter thickness.

31 Providing and fixing antique/ SS finished brass handles with antique/ SS polished MS screw complete:

32 9.37 Providing and fixing M.S. fan clamp/hook for ceiling fan made out of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop.

33 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m).

12.46.2 Granite stone black 274.02 SQM

34 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m).

12.45.2 Granite stone black 30.00 SQM

35 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm)

36 12.50 KOTA stone slab 25mm thick in risers and treads of steps, skirting dado and pillar laid in 12mm (Average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (single stone is to be used for riser and treads of steps and the width of stone for skirting and dado shall be equal to the height of skirting/ dado up to length of 1.0 M.)

37 12.60 Providing and fixing 20mm thick Jaisalmer stone flooring in any pattern over & including 20mm thick cement mortar bedding in CM 1:6 including cement float and filling joints with white neat cement slurry mixed with pigment to match the shade of stone with all wastage of all material including grinding, finishing, polishing and cleaning etc. complete (Edges and joints of stone are cut neatly so that thickness of joints to be not more than 1.50mm ) and i/c cost of all materials, labour and running & hire charges of all machineries required for the work at all heights.

38 14.13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.

39 Wall painting with acrylic luxury emulsion (plastic) paint of required shade to give an even shade.

14.11.1 On new work (two or more coats) 4756.49 SQM

40 14.12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.

41 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

12.7.1 Size upto 200x300mm 495.26 SQM

42 Providing and laying rectified ceramic glazed floor tiles of size 300x300mm and above conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete.

12.10.1 Size 300x300mm 181.04 SQM

43 Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:

14.15.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 6436.74 SQM

43 Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:

14.15.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 258.70 SQM

44 Painting on new work (two or more coats) to give an even shade with:

14.22.2 Premium synthetic enamel paint 6.75 SQM

45 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete.

9.57.2 SS Grade 304 39.60 KG

46 10.63 Providing and fixing 97mm thick Gypsum board partition upto ceiling height consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120, consisting of floor and ceiling channel 50mm wide having equal flanges of 32mm and 0.55mm thick fixed to the floor and ceiling at the spacing of 610mm centre to centre with dash fastener of 12.5mm diameter 40mm length and the studs 48mm wide having one flange of 34mm and other flange 36mm and 0.55mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm centre to centre by 6mm dia bolts and nuts at both ends of partition fixed flush to wall with rawl plugs at spacing of 450mm centre to centre and fixing of boards to either side of frame work by 25mm dry wall screws on studs, floor and ceiling channels at the spacing of 300mm centre to center and 97mm thick Gypsum board which includes one layer of tapered edge 12.5mm thick Gypsum plaster board (conforming I.S. 2095-1982) screw fixed with 25mm screws at 300mm centre to centre to either side, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, joint finisher and two coats of primer suitable for board as per manufacture's specification and Direction of Engineer-in-charge all complete.

1 9.2 Structural steel work riveted or bolted or welded in built-up sections, trusses and frames work upto a height of 5m above plinth level, including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer.

2 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete.

10.1.1 1.00 mm thick sheet (weight 8.60 kg/m2) 600.00 SQM

1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1.1.1 In all types of soils. 24.95 CUM

2 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.

3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 1.70 CUM

4 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 11.72 CUM

5 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 25.76 SQM

2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 21.06 SQM

6 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 1054.90 KG

7 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) 5.31 CUM

8 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design:

20.11.1 With 20x20 mm square bar 13.00 NOS

9 Providing and fixing in position precast R.C.C. manhole cover and frame L D- 2.5 of required shape and approved quality

20.15.1 Rectangular shape 600x450mm internal dimensions 3.00 NOS

10 12.2 25mm thick cement concrete flooring with 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with floating cost of neat cement.

11 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.

12 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.

18.76.3 150 mm dia pipe. 2.00 MTR

RAIN WATER HARVESTING

1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1.1.1 In all types of soils. 144.40 CUM

2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 2.71 CUM

3 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 108.40 KG

4 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 5.13 SQM

2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 13.33 SQM

5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) 10.75 CUM

6 Supplying, filling, spreading & leveling stone boulders/ Gravels/ Coarse sand, in recharge pit, in the required layers and thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (excavation of pit will be paid separately).

21.14.1 Stone boulders of size range 5 cm to 20 cm, in recharge pit 32.40 CUM

21.14.2 Gravels of size range 5 mm to 10 mm, over the existing layer of boulders 18.00 CUM

21.14.3 Coarse sand of size range 1.5 mm to 2 mm over existing layer of gravel 2.70 CUM

7 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) slotted pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineerin- charge.

21.4.3 150 mm nominal size dia. 3.00 MTR

8 Providing and fixing in position precast R.C.C. manhole cover and frame L D- 2.5 of required shape and approved quality

21.4.3 Rectangular shape 600x450mm internal dimensions 1.00 NOS

9 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1.1.1 In all types of soils. 4.50 CUM

10 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M.

11 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.

12 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

20.1.2 150 mm diameter 50.00 MTR

13 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design:

20.2.2 150 mm diameter 50.00 MTR

14 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.

18.76.3 150 mm dia pipe. 50.00 MTR

1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1.1.1 In all types of soils. 280.00 CUM

2 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.

3 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm

12.65.2 Pigment Coloured (rubber mould) precast interlock concrete blocks 1400.00 CUM

4 ROAD SOR 8.1 Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in PCC M20 grade on PCC M10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409)

1 22.2 Supplying and stacking of good earth at site including royalty, loading, unloading and carriage upto 5 km (earth measured in stacks will be reduced by 20% for payment).

2 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.

3 22.4 Supplying and stacking at site well decayed cow dung manure from approved source, including loading, unloading and carriage upto 5 km (manure measured in stacks will be reduced by 8% for payment).

4 22.4 Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand:

22.25.1 Hedges like Alife, Dorenta, Tikoma etc 550.00 NOS

22.25.2 Furn like Arica, China etc (3 year old) 550.00 NOS

22.25.3 Hibiscus (Flower)/ Rose 550.00 NOS

5 ROAD SOR 12.6 Providing and planting of 3‟0” to 4‟0” heighted wasingtonia, filipheria/bismarkia novelist plam plants with 1‟6” x 1‟6” depth pit formation and soil preparation, (Mixing organic manure and plant‟s protection insecticide). Up to 4 month maintenance.

6 ROAD SOR 12.7 Providing and planting of 3‟0” to 4‟0” heighted wasingtonia, filipheria/bismarkia novelist plam plants with 1‟6” x 1‟6” depth pit formation and soil preparation, (Mixing organic manure and plant‟s protection insecticide). Up to 4 month maintenance.

7 ROAD SOR 12.10 Providing and planting of plumeria (Champa) 2‟0” to 3‟0” heighted plants with 1‟0” x 1‟0”x1‟6” depth pit formation and soil preparation work‟s, (Mixing organic manure and plant‟s protection insecticide). Up to 4 month maintenance.

1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1.1.1 In all types of soils. 420.70 CUM

2 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.

3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). 48.00 CUM

4 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 95.30 CUM

5 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 7625.90 KG

6 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

2.1.2 Wall of any thickness including attached pilasters, buttresses etc. in super structure. 793.70 SQM

7 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) 102.95 CUM

8 Providing and making 12mm thick cement plaster of mix:

11.2.1 In cement Mortar 1:3 (1 cement : 3 fine sand) 970.24 SQM

9 Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:

14.16.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 970.24 SQM

10 9.6.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

ELECTRIFICATION WORK

1 Erection of STEEL TUBULAR or "H" BEAM/ ISMB pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation and cement concrete collar of size 0.4 metre dia and 0.50 metre height from ground level including excavation and refilling etc. as per specification of length:

19.10.1 Upto 3.0 metre 75.00 NOS

2 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

1.13.2 3 X 2.5 sq. mm in 20mm conduit 508.00 MTR

3 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt.

4 Supplying of following 230/250 volts LED Flood light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Seperate housing for driver etc complete as per specification and P.A. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt.

5 Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 3mm thick anchor plate, 4 nos 16mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3)

19.6.1 3 metre high, dia 130mm at bottom and 75mm at top, base plate size 200x200x12mm, foundation bolts 450mm long 75.00 NOS

STAGE CURTAIN SYSTEM

1 Supply of main curtain motorised curtain control system with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pulleys, 3 mm steel wire rope, 1 HP motor (Compton), 2 nos. air breaker contactors (L&T), 2 nos. micro switches for auto stop, 3 nos. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed, stitched in double gathering (velvet raymond/reliance cloth or eq.) size - 17' x 7' 1 NOS

2 Supply of cloth wings made out of black glazed cotton cloth on one side of MS 50 mm × 25 mm × 16 G pipe welded frame work. The pipe frame work made out of 25 mm × 50 mm pipe. Fixed with overhead pivot track complete with duly painted on both framework. 6 NOS

3 Supply of suitable size average frills made out from Black glazed cotton cloth duly stitched in double gathering. 2 NOS

4 Installation Charges including installation material. 1 NOS

1 Supply of Par-64, 1000W, 240 volt shielded beam available in three version i.e. spot, flood and wide flood, (GE/Philips) colour, temperature 3200 K base - extended module and prog, Housing CRC sheet metal matt black finish with sufficient ventilation, with 2 mtr, 3 core wire, plug, clamps. 24 NOS

2 Supply of Profile Spot 360, 750W HPL Lamp Supply of profile spot 360, 750 W HPL lamp with rated power up to 750 W with GECAT 750 W lamp, faceted reflector removes 90% of IR heat from its beam, interchangeable lens tubes rotating +250°, four stainless-steel shutter blades assembly, tool-free lamp position adjustment, insulated & safe rear handle, rugged and graceful die-cast aluminium construction, power 220V/50Hz, lamp 220V HP L750 W G9.5, colour temperature 3200 K, available in 19°/26°/36°/50° with 3 core copper wire with 15 amp plug & top, IRIS. 5 NOS

3 Supply of Spot Light 1000 Watt Supply of spot light 1000 watt, 240V halogen lamp T-11 type reflector spherical anodized finish, lens plano convex lens 150 mm dia. Housing CRC sheet, colour black, focusing front/back/rotary knob, 2 mtr, 3 core wire, plug top (lamp: GE/Philips). 12 NOS

4 Supply of Halogen Floods 1000 W Supply of halogen floods 1000 W, Brandoor type with halogen tube, reflector aluminium anodized finish, color black, housing CRC sheet metal, holder 2 Nos., RTS/RX7S with silver tip contact, 2 mtr 3 core copper wire, 3 pin plug top (lamp Halonix). 4 NOS

5 Supply of 500 W Halogen Cyclorama Flood Light Supply of 500 W halogen cyclorama flood light with 500W halogen tube. Aluminium anodised reflector, 2 Nos. compressible recessed single contact holders, colour frame & suitable clamp complete as required. 12 NOS

6 Supply of Electronic Dimmer (Wall Mount Type) Supply of electronic dimmer wall mount type, 12 ch × 4 kW, auto sensing of supply voltage (140–260 VAC), automatic supply frequency tracking 40–60 Hz, linear dimming curve, neon load present indicator, high quality RF noise suppression, radio frequency interference suppression better than BS-800 guidelines, 12 channels, 99.5% duty cycle, single, dual or three phase operation, phase monitoring neon, control signal socket, soft start function at power up, lamp pre-heat level selector for longer lamp life, individual channel test controls, individual channel blown fuse indicators, individual channel status indicators with patch panel. 2 NOS

7 Supply of 2.5 sq.mm 3 Core Shielded Wire 1500 MTR

8 Supply of Cable Tray 40 × 100 × 16 SWG. 110 MTR

9 Supply of Light Socket Box 4" × 4" with 15 Amp socket. 92 NOS

10 Supply of Side Light Ladder of 25 mm × 50 mm. 6 NOS

11 Supply of Lighting Bar Supply of 50 mm OD GI pipe (B-Class) for lighting bar to be hung from top with support of clamps. 120 MTR

12 Supply of DMX Splitter 1 in 8 out. 1 NOS

13 13. Supply of DMX Cable for stage to control room. 100 MTR

14 Installation charges including connector, cable and accessories. 1 NOS

1 Supply of main speaker 700 W RMS / 8 Ohm recommended amplifier passive crossover filter featuring "soft-trip" circuitry to ensure full protection of LF woofer and HF Driver, 2 NL-4 Neutrik Speakon connectors, B&C custom designed 380 mm (15") neodymium woofer, voice coil B&C 36 mm (1.4"), compression driver 64 mm (2.5") voice coil, 90° H × 60° V constant directivity horn, 4 × M10 anchoring points, 35 mm dia. (1.38") top-hat for speaker stand placement and wall bracket mounting flange, 2 integrated carrying handles. 8 NOS

2 Supply of stage monitor, 2-way bi-amp bass reflex design, 400 + 100 W RMS Class-D amplifier, 60 Hz – 20 kHz frequency response, 12" B&C coax custom woofer, 1" B&C HF driver, DSP with 4 presets, 130 dB SPL max, 90° dispersion, gas-injection polypropylene molded enclosure. 2 NOS

3 Supply of side fill speaker 700 W RMS / 8 Ohm, recommended amplifier passive crossover filter featuring “soft-trip” circuitry to ensure full protection of LF woofer and HF driver, 2 NL-4 Neutrik™ Speakon connectors, B&C custom designed 380 mm (15") neodymium woofer, voice coil B&C 36 mm (1.4"), compression driver 64 mm (2.5") voice coil, 90° H × 60° V constant directivity horn, 4 × M10 anchoring points, 35 mm dia. (1.38") top-hat for speaker stand placement and wall bracket mount flange, 2 integrated carrying handles. 2 NOS

4 Supply of power amplifier, 2 Channel Power Amplifier, 2 × 1500 W RMS (4 Ohm), 3000 W RMS (8 Ohm Bridge). 5 NOS

5 Supply of audio mixer, 24 Channel. 1 NOS

6 Supply of Graphics Equalizer. 4 NOS

7 Supply of Digital Delay Unit. 1 NOS

8 Supply of Feedback Unit 1 NOS

9 Supply of CD Player with USB 1 NOS

10 Supply of Corded Dynamic Vocal Microphone 6 NOS

11 Supply of Corded Dynamic Vocal Instrument Microphone 6 NOS

12 Supply of Hand C/L Wireless Microphone 2 NOS

13 Supply of Podium Microphone 2 NOS

14 Supply of Microphone Stand (Big) 6 NOS

15 Supply of Microphone Stand (Small) 6 NOS

16 Supply of Microphone Cable from Stage to Control Room for Microphone Points with Conduit Pipe etc 800 MTR

17 Supply of Speaker Wire 2.5 sq mm × 2 Core 200 MTR

18 18. Supply of Microphone Connecting Box Made out of CRC sheet metal box duly powder coated paint With 4 Nos. XLR panel mounting socket & phono socket Facility to connect 4 Nos. microphone channels 6 NOS

19 Supply of Looping XLR to XLR up to 5 mtr 16 NOS

20 Supply of Looping XLR Lead up to 5 mtr 30 NOS

21 Supply of Patch Panel Box Made out of CRC sheet metal box duly painted in black colour To be fixed in the facility to connect 24 Nos. microphone channels 1 NOS

22 Supply of Suitable Size Audio Rack To fix Audio Amplifier, Graphics Equalizer, Delay Unit, Feedback Destroyer and CD Player Locking facility with front glass door 1 NOS

23 Supply of Loose Audio Connector for AMP / Effect Rack / XLR / Speak-on / RC etc. 1 NOS

24 Installation charges with electrical work. 1 NOS

AUDITORIUM CHAIR

1 Supply of Auditorium Chair. Chair arm rest: 21" standard, side stand: 3" iron box upholstered with fabric. Armrest (Handle): PU. Chair leg will be fixed. Back angle: 14 gauge, sliding (push back). Inner material: moulded PU foam, density 50 kg/m³. Push back mechanism: 14 gauge and 16 gauge with no disturbing noise. All iron parts will be powder coated. Inner structure: plywood frame in seat and iron frame seat back. 450 NOS

2 Supply and marking row number and seat number. The both edge of all row will glowing marks showing row number. The low mount LED aisle light system of illumination, low voltage (24V) system design power LEDs which are oriented in such a manner to provide a uniform light pattern in aisle location without bright spots. The low mount aisle light is located on the quattro axis point providing a modern appearance of the illumination fixture. 11 NOS

3 Installation including all required installation material. 1 JOB

CELLING ACOUSTIC

1 Supply of hall ceiling grid work, duty T-Grid (24 mm), main runner, cross tee, wall angle, thickness: 0.35 mm. 635.00 SQM

2 Supply of ceiling tiles, size: 600 × 600 mm, NRC: 0.4–0.6 D, DNCW (dB) 34. 635.00 SQM

3 Supply of hall wall filling work with 50 mm glass wool / rock wool mat backing. 635.00 SQM

4 Installation cost including all accessories required for installation. 635.00 SQM

1 Supply of hall wall grid work using metal & wooden as per acoustic design 588.00 SQM

2 Supply of ceiling tiles, size: 600 × 600 mm, NRC: 0.4–0.6 D, DNCW (dB) 34. 588.00 SQM

3 Supply of hall wall tiles works and make diffuser using wooden frame with designer cloth with Noise Reduction Coefficient (NRC): 0.80. 588.00 SQM

4 Installation cost including all accessories required for installation. 588.00 SQM

1 Supply of table size 3' × 5' feet and 2.5' height, made of 12 mm plywood sheet and finished with Sunmica pasting on all sides. 1-inch border around the top. (4 for Office Room, 2 for Security Room, 4 for Green Rooms) 11 NOS

2 Executive Chair for Office 13 NOS

3 Supply of Sofa for Office Room, Waiting Room, Ladies & Gents Green Room, along with table. 12 NOS

4 Mirror Supply of Mirror 24 inch × 36 inch, 4 mm Saint-Gobain or Modi bevelled mirror Decorative frame made out of synthetic material. For Ladies & Gents Green Room 6 NOS

5 Bed Supply of Bed Size 6' × 6' feet and 2' height, made of 12 mm plywood sheet and finished with Sunmica pasting on all sides. (4 for Rooms) 2 NOS

AIR CONDITIONNING

1 Air Conditioner as per required area (Central Air Cooling System) 1 NOS