Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹56.2 LAccepted-AOC 1227 MODEL TOWN MODEL TOWN BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L-1 | Accepted-AOC Being lowest and reasonable. | |
| 2 | L-2₹59.4 L+₹3.2 L (5.69%)Rejected-Finance 01 ENTERPRISES | L-2 | Rejected-Finance Not being lowest bidder. | |
| 3 | L-3₹60.8 L+₹4.6 L (8.17%)Rejected-Finance H NO 17036 9 STREET NO 5 A AGGARWAL COLONY BATHINDA PB 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L-3 | Rejected-Finance Not being lowest bidder. | |
| 4 | L-4₹61.6 L+₹5.4 L (9.52%)Rejected-Finance 64 SHAHEED UDHAM SINGH MARKET NEAR OLD BUS STAND BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L-4 | Rejected-Finance Not being lowest bidder. | |
| 5 | L-5₹64.6 L+₹8.3 L (14.8%)Rejected-Finance 1000 PUDA MODEL TOWN PHASE 5 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L-5 | Rejected-Finance Not being lowest bidder. |
Tender Value
₹88.4 L
EMD Value
₹1.6 L
Closing Date
18 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bathinda
HQ CWE Bathinda Bathinda Mil Stn
SPL REPAIR TO BLDG NO. P-1129 (OFFICE COMPLEX) UNDER GE(N) BATHINDA AT BATHINDA MIL STN (JOB NO 81 SA/BTD/SR/BLDG-19/2023-24)
2024_MES_643641_1
CWE BTD/TOKEN-46/2023-24
Open Tender
Civil Works
Item Rate
270 days
Bathinda Mil Stn
As per NIT
7 documents required · 7 mandatory
₹1,000
GE (North) Bathinda
₹1.6 L
HQ CWE Bathinda
10 Jun 2024
22 Feb 2024
20 Apr 2024
22 Feb 2024
18 Apr 2024
11 Apr 2024
8 Mar 2024
Amount
Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed by Engineer-in-charge.
Supply and fixing PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Factory Made PVC Moulded Door Shutter, With Particle Board Core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-charge.
Supply and fixing aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Stainless Steel Butt Hinge, 100 mm size, heavy weight, fixed with screws complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified and as directed by Engineer-in- charge.
Taking down aluminium shutter of any description (with or without frame as per site requirement) area exceeding 1.00 sqm but not exceeding 2.00 Sqm each and refixing in same opening after necessary easing, minor repairs, adjustment/alignment, replacement with and inlcuding broken beading and rubber packing, tigtening of screws, adjustment of hinges, adjustment of fittings like handle / tower bolt /door stopper etc. (glass if required for taking out, same shall be refix as per original, if any damage during repair same shall be replaced by contractor without any extra cost to department) complete all as specified and directed by Engineer-in-charge.
Taking down aluminium shutter of any description (with or without frame as per site requirement) area not exceeding 1.00 sqm and refixing in same opening after necessary easing, minor repairs, adjustment / alignment, replacement with and including broken beading and rubber packing, tigtening of screws, adjustment of hinges, adjustment of fittings like handle/tower bolt/door stopper etc (glass if required for taking out, same shall be refix as per original, if any damage during repair same shall be replaced by contractor without any extra cost to department) complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 25 mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-charge.
Supply and fixing 12mm thick PVC board both side wooden colour, film laminated decorative type, fixed with screw to the frame cup boards and woodern rack and like complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing Continuous (piano) hinges, mild steel, bright finish or electro galvanished, width of flap when open 30mm complete all as specified and directed by Engineer-in-charge.
Supply and fixing 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engineer-in-charge.
Supply and fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed by Engineer-in-charge.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engineer-in-charge.
Material and Labour Particle board, medium 18/19 mm thick density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed by Engineer-in-charge.
Material and Labour for Providing and fixing aluminium work with Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conformikng to IS:733 and IS :1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including aluminium cleat angle, Aluminium snap beading for glazing/ paneling , C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge . Note :- (i) Weight of aluminium sections , aluminium cleat angles, Aluminium snap beading shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of aluminium at site. (ii) The rate of material and labour for providing the EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws is included in this item and nothing shall be paid extra on this account. (iii)During considering the weighing of aluminium sections , aluminium cleat angle, Aluminium snap beading , the weight of EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws shall not be considered for measurments and payments. only the weight of the aluminium sections , aluminium cleat angles, Aluminium snap beading shall be considered and measurment and payment shall be made accourdingly. (iv) Glazing /Paneling shall be measured and paid seperately. (v) During the weighing of aluminium sections , aluminium cleat angle, Aluminium snap beading ,the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account.(vi) Powder coated butt hinges, aluminium handles & aluminium peg stays shall be measured and paid seperately under respective itmes of Schedule'A' BoQ.
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micorn) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., minimum thickness of powder coating 50 micron drawing and size as approved by GE complete all as specified and directed by Engineer-in-charge . Note :- Weight of aluminium section/aluminium channel shall be physically ascertained through a board of officers convened by Accepting officer and payment shall be made only after ascertaining the actual weight of aluminium at site.
Supply and fixing Door closer hydraulically regulated, designation No 3, universal type, aluminium (extruded section) body, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engineer-in-charge.
Material and Labour Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-charge.
Supply and fixing floor door stopper Overall length of cover plate 140 mm of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed by Engineer-in-charge.
Supply and fixing 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane complete all as specified and directed by Engineer-in-charge.
Supply and fixing 5.5mm thick tinted sheet glass ordinary quality and glazing with oil putty in squares exceeding 0.50 Sqm in each pane complete all as specified and directed by Engineer-in-charge.
Supply and fixing Solar control reflective type 25 micron film complete all as specified and directed by Engineer-in-charge.
Supply and fixing 4.0mm thick Frosted or obscured on side glass, and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
Material and Labour Double layered glazed panel of thickness 39.04mm (6mm ST 167 Toughened +1.52 PUB + 6mm clear + 12mm AG + 6mm clear Toughened +1.52 PUB + 6mm clear Toughened glass) with suitable frame, glass layer and an argon-filled cavity second laminated layer includes a polyvinyl Butyral interlayer, Tax Maxi view, heated, laminated glass, tinted glass-resistant, including a heat control interlayer, including suitable gasket, sealent/silicon Gel filling in gaps between glass pane and frame are designed for civilan and Military visual / Air traffic control room application with suitable deflection limit. Fabrication and installation, weathering and fizing elements tools, shims & silicon (Poyshim+Silicon sealent) fixing (Brackets & anchor bolts and tie rods and weathering silicon & backer road. Glass panels are both Aldus lamps and NVG compatible, Glazed panels be designed to with stand wind load complete all as specified and directed by Engineer-in-charge.
Material and Labour for Cutting hole in brick wall Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exceeding half brick but not exceeding one brick built in Cement mortar incl making good dismantled portion in Cement Mortar 1:3 or Cement Concrete Type B-1, complete all as specified and directed by Engineer-in-charge.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided forcomplete all as specified and as directed by Engineer-in-charge .
Material and Labour for sunken treatment to floor with 10mm thick cement plaster in Cement Mortar 1:3 even & smooth without using extra cement, mixed with integral water proofing compound @ 200 ml per 50 kg of cement at bottom/sides of slab with and including serial no.(i), (ii) & (iii) as elaborated (i) applying 1st coat of pidifin 2K on cleaned RCC surface @ 0.86 kg/sqm (min) as recommended by manufacturer (ii) provide a layer glass fiber mesh 2.25mm x 2.25mm (45 GSM) over first coat of chemical pidifin 2K as per manufacturer's instructions(iii) applying second coat of chemical pidifin 2k @0.86 kg/sqm min layer glass fiber mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturer complete all as specified and as directed by Engineer-in-charge.Note:- Water proof compound shall be measured and paid seperately under respective item of Schedule'A' BoQ as supply only.
Supply only integral water proofing compound complete all as specified.
Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg / Sqm including cleaning surfaces complete all as specified and as directed by Engineer-in-charge.
Material and labour for cement concrete (1:5:10), type E-2 using 40 mm graded stone aggregate as sunken floor complete all as specified and as directed by Engineer-in-charge.
Material and Labour for 25 mm thick PCC 1:2:4 type B-0, using 12.5mm graded stone aggregate as in floor for bases sunken portion complete all as specified and directed by the Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by the Engineer-in-Charge.
Material and Labour for glazed ceramic coloured tiles of size 450 x 350mm/450 x 300 mm, 7 to 8mm thick in vertical surfaces such as dado / skirting, set and jointed in neat cement slurry @ 3.00Kg Per Sqm and pointed in white or coloured cement pigmented to the match the shade of tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed by the Engineer-in-Charge.
Material and Labour for vitrified ceramic tiles (Light shade) , area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm , 8-9 mm thick (square), polished, shade and colour as approved by GE , in floors etc set and jointed in neat cement slurry @ 3kg/ Sqm and pointed in white cement with pigments to match the shade of tiles laid over and including 15 mm thick Screed bed or bedding layer in CM (1:6) in white cement with pigments complete all as specified and as directed by Engineer-in- charge.
Material and Labour for light shade, vitrified ceramic tiles of size 600mm x 600mm, 8-9 mm thick (square), polished, on vertical surfaces as in skirting etc set and jointed in neat cement slurry @ 3kg/ Sqm and pointed to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:4) in white cement with pigments to receive the tiles complete all as specified and as directed by Engineer-in- charge.
Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Material and labour Granite (of any type) tiles 18mm-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete with and including screed bed 15mm thick in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations etc. complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for marble work (Green Marble as approved by GE)( Table rubbed and polished) in one piece 18mm to 20 mm thick in steps, jambs,stairs,pillars,window cills, cooking plateforms and like laid over and including 15 mm thick cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and mirror polishing on marble to give high gloos finish complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing in repair 450 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.
Supply and fixing in repairs stop cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified & directed by Engineer-in-charge.
Supply and fixing in repairs brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified & directed by Engineer-in-charge.
Supply and fixing in repairs chromium plated with long shank and cup ( concealed type) stop valve for 15 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .
Supply and fixing in repairs Brass chromium plated Tubular towel rail, 20mm dia , D type, 60 cm long between flanges complete all as specified and as directed by Engineer-in- charge.
Supply and fixing in repairs Soap dish, any type, fixed to plugs on wall with chromium plated brass screws complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in repairs 15 mm bore bib tap, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in- charge.
Supply and fixing in repairs grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed
Supply & Fixing in repair drapery curtain rod 19/20mm dia, fabricated out of mild steel, pipe with PVC coating, wall thickness of pipe not less than 20 guage, including fancy type brackets and decorated end knobs (finals), stop roller etc, fixied on wall for doors and windows curtains, cuttings as required length and fixing at site including fixing arrangements, rawl plug, screws etc. including taking out old any type rod or pelmet boxes with curtain rod complete all as specified and directed by Engineer-in-charge.
Taking down or up 15 mm bore galvanised iron tubing and removal from site complete all as specified and directed.
Taking down or up 20 mm bore galvanised iron tubing and removal from site complete all as specified and directed.
Refixing old GI tubing 15 mm bore pipe reterived from serial item no.53 here-in-before after cleaning and connections in new or old position , with new fittings and fixed to walls & ceilings or laid in floors and making good as per existing surfaces complete all as specified and directed by Engineer-in-charge Note:-1 The rate of cleaning of surfaces of old pipe is included in this item.2 The rate of new fiitings is also included in this item. Hence old fittings shall not be used in this item.
Refixing old GI tubing 20 mm bore pipe reterived from serial item no.54 here-in-before after cleaning and connections in new or old position , with new fittings and fixed to walls & ceilings or laid in floors and making good as per existing surfaces complete all as specified and directed by Engineer-in-charge Note:- 1 The rate of cleaning of surfaces of old pipe is included in this item.2 The rate of new fiitings is also included in this item. Hence old fittings shall not be used in this item.
Supply & fixing GI tubing medium grade with all new fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm and making good as per existing surfaces complete all as specified and directed by Engineer-in-charge
Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm and making good as per existing surfaces complete all as specified and directed by Engineer-in-charge
Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed by Engineer-in-charge
Supply & fixing in repairs vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' trap including connection to drain ( or outgoing pipe) and to flushing pipe, anti syphonage pipe etc., including plastic water closet seat cover black pedestal pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed by Engineer-in-Charge.
Supply & fixing Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic leats.(Minimum weight 105gms) complete all as specified and directed by Engineer-in-Charge.
Supply& fixing in repair corner glass shelf (with bracket) size 225mm x 225mm length of both side corner glass shelf complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing towel rack with lower hanger (stainless steel) 600mm long with 4 No’s of lower hanger complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair vitreous china urinal, half stall type,white ,size 355mm x 340mm x 535mm including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plug with and including 60 mm long brass screws,32mm dia full threaded PTMT waste coupling and 32 mm dia waste pipe including spreader and pointing around urinal back in cement complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repair Vitreous china wash hand basin, white, flat back, size 450mm x 300 mm including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of waste fitting and union complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in repairs 15mm bore Brass Chromium Plated , Fancy type , wash hand mixture for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer-in-charge.
Supply & fixing hand shower (health faucet) SS chromium plated mild steel chromium plated including 1.20 meter long 8mm dia flexible tube and including wall hook for 25mm bore pipe complete all as specified and as directed by Engineer-in-charge.
Supply & fixing Toilet roll holder with Stainless steel flap complete all as specified and as directed by Engineer-in-charge.
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, sewage pipe line , water supply pipes ,cables etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.
Returning filling in, approved soft/loose soil, including spreading , levelling, watering and well ramming in layers, each layer not exceeding 25cm in soft/loose soil complete all as specified and as directed by Engineer-in-charge.
Removing surplus excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed by Engineer-in-charge.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete)pipe up to and including 100mm bore pipe complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Salt-glazed stoneware drain pipes 150mm bore (internal) of grade 'A' laid in trenches and jointed etc. complete all as specified and as directed by Engineer-in-charge. Note: Excavation and earth work shall be measured and paid seperately under respective items of Schedule 'A' BoQ.
Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in concrete bed of SGSW drain pipes of 150 mm bore, laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-charge. Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be outer diameter of drain pipes (not of sockets / collar) plus 30cm.
Material and Labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for Internal dia of pipe in 150 mm complete all as specified and as directed by Engineer-in-charge.
Dismantling of cast iron soil waste & vent pipe of dia 100mm including all fittings jointed in cement mortar, fixed to wall or laid under floor complete all as specified and as directed by Engineer-in- charge.
Dismantling of cast iron soil waste & vent pipe of dia 75mm including all fittings jointed in cement mortar, fixed to wall or laid under floor complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing 75 mm dia cast iron soil waste & vent pipe drain pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing 75 mm dia cast iron soil waste & vent pipe drain pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing 100 mm dia cast iron soil waste & vent pipe drain pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing 75mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing 100mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in repair 75 mm dia CI floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1, complete all as specified and as directed by Engineer-in- charge.
Material & Labour for Extra over cast iron pipes and fittings if epoxy joint is provided in lieu of cement jointt for bore of pipe 75mm complete all as specified and as directed by Engineer-in- charge.
Material & Labour for Extra over cast iron pipes and fittings if epoxy joint is provided in lieu of cement jointt for bore of pipe 100mm complete all as specified and as directed by Engineer-in- charge.
Supply and fixing 100mm bore Cast Iron Socket connection to fit out let of WC complete all as specified and as directed by Engineer-in- charge..
Supply and fixing 75mm bore cast iron cowl fixed with cement joint in cement mortar (1:2) complete all as specified and as directed by Engineer-in- charge..
Demolition of brick tiles or terracing tiles, single layer and removal from site complete all as specified and as directed by Engineer-in- charge.
Demolition of mud from roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part there of) including removing / cutting uprooting grass, vegetations and roots of small plants etc on roof floor and surrounding / parapit wall etc, including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 100 metres from the site complete all as specified and as directed by Engineer-in-Charge.
Wire brushing and cleaning top surface of roof slabv including washing the surface with water and making the surface free from mud etc. complete all as specified and as directed by Engineer-in-Charge .
Material and labour for PCC (1:2:4) Type-B0 12.5 mm graded stone aggregate laid to slope as directed over RCC roofs, mass concrete as padding complete all as specified.
Material and labour for rendering 15 mm thick in Cement Mortar 1:4 on fair faces of concrete surfaces of roof slab using water proofing compound @ 200 ml per 50 kg of cement complete all as specified and as directed by Engineer-in-Charge. Note :- WPC shall be measured and paid separately under respective item of Schedule 'A' BoQ as supply only.
Material and Labour for Priming surface and applying APP based polymeric membrane mat finished top of weighing not less than 3.00 Kg / Sqm and minimum 3mm thick reinforced with polyester non woven fabric (Weight not less than 150 Gms / Sqm) laid on primed surface by forced application as treatment (for moderate conditions) including after applying bituminous primer @ 0.5 ltr/sqm over RCC/plastered roof surface flashing etc. complete all as specified and as directed by Engineer-in-charge.
Material and labour Ceramic roof tile, white colour 8-10mm thick, minimum size 300mm x 300mm conforming to solar reflective index (SRI) laid over with and including bedded on 15mm thick screed in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white cement complete all as specified and directed by Engineer-in-charge.
Material and labour for rendering 15 mm thick in Cement Mortar 1:3 on roof surface including flasing and junctions of Parapets, chajjas etc., finished wth even and fair , with and including brushing cement slurry @ 1.20 Kg/Per Sqm with water proofing compound @ 200 ml per 50 kg of cement complete all as specified and as directed by Engineer-in-Charge. Note :- WPC shall be measured and paid separately under respective item of Schedule 'A' BoQ as supply only.
Material and labour for making benching with PCC (1:2:4) type B-0 using 12.5mm stone graded aggregates with water proofing compound @ 200 ml per 50 kg of cement along side walls adjoining to roofs, in Concave shape complete all as specified and as directed by Engineer-in-charge.Note :- WPC shall be measured and paid separately under respective item of Schedule 'A' BoQ as supply only.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed by Engineer-in-charge
Material and labour for 15mm thick rendering in Cement Mortar 1:6 on fair faces of brick work or concrete surfaces of walls and finishing even & smooth but without using extra cement complete all as specified and as directed by Engineer-in-charge
Material and labour for rendering 15 mm thick polymer modified plaster in cement mortar (1:4) and using SBR Latex emulsion @ 200 ml per 50 kg of cement on fair faces of brick work or concrete surfaces of walls, finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge . Note:-SBR Latex emulsion material shall be measured and paid for separately under respective item of Schedule 'A' BoQ as supply only.
Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.
Supply only Styrene butadiene rubber latex emulsion compelte all as per manufacturer's instructions.
Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description complete all as specified and as directed by Engineer-in-charge.
Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.
Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in flooring, hard standing, plinth protection/path etc. finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge
Demolition of RCC as in roof slabs (other than ground floors), beams, stair case, landing, chajjas, and similar suspended work (reinforcement cut as required to facilitate demolition) all as specified and directed by Engr-in-Charge.Note:Schedule of credit of scrap iron for this item shall be ascertained by BOO as ordered by GE and same shall be enclosed with Final bill duly countersigned by GE.
Material and labour for RCC 1:2:4 Type-B-1 (Nominal mix) using 20 mm graded stone aggregates as in chajja complete all as specified and as directed by Engineer-in-charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
Material and Labour for TMT steel bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in- charge.
Material and Labour for Use and waste of formwork to sides and soffits of chajjas with fair finished surface of concrete height up to 3rd storey complete all as specified and as directed by Engineer-in- charge.
Dismantling PVC water storage tank of capacity 500 Liters to 1000 Ltrs including all accessories complete all as specified and as directed by Engineer-in- charge.
Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection complete all as specified and as directed by Engineer-in-charge. (Note :- Float valve and gate valve shall be measured & paid separately under appropriate item of BOQ.)
Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection complete all as specified and as directed by Engineer-in-charge. (Note :- Float valve and gate valve shall be measured & paid separately under appropriate item of BOQ.)
Supply & fixing ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 20mm bore iron pipe complete all specified and as directed by Engineer-in-charge.
Supply and fixing gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Cutting chases to Stone concrete block or slab walls , pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10cm girth complete all as specified and as directed by Engineer-in-charge.
Material and labour for preparation of new plastered surafaces of walls and applying two coats of Distempering with distemper dry, white or tinted with and over 1.5mm thick wall putty over a coat of primer complete all as specified and as directed by Engineer-in-charge.
Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preparation of surfaces, complete all as specified and as directed by Engineer-in-charge.
Material and labour for preparation of new plastered surfaces of walls/ pillars/ cornices by brooming down with using broom/ sand papering or by any other means, preparing the surfaces smooth by applying one coat of exterior emulsion primer as priming coat and after that applying two coats of weather proof exterior emulsion paint ( 100% exterior grade) including one coat of 1.5mm thick wall putty by using paint brush/roller brush as approved tint/ colour complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Complete removal of existing treatment of wall (any number of layers)from walls/pillars/cornices by scrapping down with using steel patti and mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down including applying white cement based putty where required for filling to depressions to make the surafce smooth applying two coats of weather proof exterior emulsion paint ( 100% exterior grade) including 1.5mm thick one coat of wall putty by using paint brush/roller brush as approved tint/ colour complete all as specified and as directed by Engineer-in-charge. Note :- Each stage i.e after complete removal and before applying weather coats as specified above, the surface shall be passed in writing by Engineer-in-charge.
Material and Labour for Complete removal of existing treatment of wall (any number of layers)from walls/pillars/cornices by scrapping , sand papering or by using mechanical sander and preparing plastered surfaces and applying two coats of oil emulsion distemper of approved tint on walls by using rooler/spray machine including 1.5mm thick one coat of wall putty over a coat of primer complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Complete removal of existing treatment of ceiling (any number of layers) by scrapping , sand papering or by using mechanical sander and preparing plastered surfaces and applying two coats of oil emulsion distemper of approved tint on ceiling by using rooler/spray machine including 1.5mm thick one coat of wall putty complete all as specified and as directed by Engineer-in-charge.
Material and Labour for preapration of old surafces of ceiling, washing rubbing down and stopping of painted surface , over with and including two coats of white wash complete all as specified and directed by Engineer-in-charge.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs /blankets, any thickness, including cover fillets , complete all as specified and directed by Engineer-in-charge.
Supply and fixing GI powder coated frame work 605mm x 605mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30 mm and web of 27mm fixed to surrounding wall using Rylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and duly suspended with 4mm GI wire hangers (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, with and including providing 600mm x 600mm x 6-7mm thick board in false ceiling with aluminium profile sheet on top side and PVC profile sheet on bottom side fixed in grid as per manufacturer specification and directed by Engineer-in-charge.
Supply and fixing aluminium butt hinges 100mm size heavy weight fixed with screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 150mm size heavy weight polyster powder coated aluminium handle, matching to window, door, ventilators etc. fixed with screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Hollow PVC sheet wall lining (paneling) consisting of 5mm thick wood grain printed PVC hollow sheet fixed as per manufactures specifications and complete all as specified and as directed directed by Engineer -in- charge .
Supply and fixing rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E- 250) quality- 'A' complete all as specified and as directed directed by Engineer -in- charge
Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed directed by Engineer -in- charge
Taking down carefully copper /aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc. complete all as specified and directed by Engineer-in-charge.The weight of aluminium scrap and copper scrap for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.
Material and labour in replacement Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with and including single core 6 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH for earth wire in existing PVC concealed conduit (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and directed by Engineer-in-charge. Notes:- (a) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade shall be measured as one length.
Material and Labour for point wiring with multistrand copper conductor FRLSH cable, ISI marked with colour coding for phase, neutral and earth, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm in and including Material and Labour for rigid non metallic PVC concealed conduit not less than 20mm dia (medium duty ISI marked) and conduit fittings concealed in wall/ ceiling and all other fixing accessories for one fan / light controlled by one switch including provision of 1.5 Sqmm PVC insulated & unsheathed with multistrand copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly including pressed steel powder coated sunken boxes of suitable size made out of 1.6mm thick sheet and covered with and including 3mm thick bakelite laminated hylem sheet (ISI marked) top cover etc. including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge
All as per item No 131 here in before but for one socket outlet 5 pin, 5/6 Amp 230 volts flush type on same board complete all as specified and as directed by Engineer-in- charge.
All as per item No 131 here in before but for one socket outlet 5 pin, 5/6 Amp 230 volts flush type on independent board complete all as specified and as directed by Engineer-in- charge.
All as item No 131 here in before but for one socket outlet 6 pin, 6/16 Amps 2 in 1 with cable 2.5 Sqmm multistranded copper conductor FRLSH cable on the independent board but not below the switch board including provision of 2.5 Sqmm PVC insulated copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing Socket outlet 3 pin, 5/6 Amp 250 volts flush type complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing switch piano flush type 5/6 Amp, ISI marked 230V AC, single pole, two way complete all as specified and as directed by Engineer-in- charge
Supply and Fixing Switch piano flush type , single pole, one way, 15/16 Amp ISI mark complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing Socket outlet multipurpose 2 in 1, 6 pin, 15/16 Amp 250 volts flush type complete all as specified and as directed by Engineer-in- charge.
Supply and fixing Ceiling Rose, polycarbonate, isolated body, surface bakelite 3 terminal, 240 volts, 5/6 Amp complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in repair Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, double door, powder coated DB SPN 8 way 240 Volt, 200 Amps rated bus bar, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
Supply and Fixing in repair Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, IP-43 protection, flush mounted for metal door, powder coated DB V TPN 4 way, 415 V AC with 200 Amps rated bus bar, Double door, dust and vermin proof suitable for incorporation of Incoming MCCB and outgoing MCB SP/TP and earth & neutral bus bar etc complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
Supply and Fixing in repair MCCB 4 pole, 415 Volt , rupturing capacity not less than 125 Amp ,10 KA fixed thermal and magnetic based complete all as specified and as directed by Engineer-in- charge.
Supply and fixing MCB ‘C’ curve suitable for 230 volts AC supply, 32 Amps, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge
Supply and fixing MCB ‘C’ curve, SPN, 32-63 Amps, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection,50 Hz including necessary attachment complete all as specified and as directed by Engineer-in-charge
Supply and fixing MCB, SP, 6 to 32 Amps, 'C' curve, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection complete all as specified and as directed by Engineer-in-charge
Supply and fixing 18/20 watt Retro LED tube light fitting, wall/surface mounted, IP 20 protection, conforming to IS16106/IS16107, minimum 6000K batten decorative type 4 feet long polycarbonate body, white , in built LED driver, power factor >0.95, including 18/20 watt tube rod complete connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size complete all as specified and directed .
Supply , fixing LED street light fitting 25 Watt 230V AC ,out door type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete power factor > 0.95,100 lumen/watt,CCT minimum 5700K complete all as per manufacturers instructions complete all as specified and as diected by Engineer-in-charge.
Supply and fixing recessed/ suspended LED ceiling light with wide light window for maximized glare free output suitable for 600x 600mm and ceiling fitting with separate electronic driver and high brightness LEDs 36 W (100 lumens per watt), not less than 5700K including connecting electric connection, complete all as specified and directed by Engineer-in-Charge.
Material and Labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia light grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note :- (a) PCC chamber shall be constructed at least 1.5 m away from earth pit. Pipe for watering shall be provided in slanting manner. (b) 4mm dia GI wire and 15mm dia light grade GI protection pipe upto 7.5 metre shall deemed to be included in quoted rate.
Supply and fixing in replacement ceiling fan complete with blades, down rods, with and including electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engineer-in-charge.Note: old rusted and out dated ceiling fan shall be deposited in the store yard of AGE E/ (North) .
Material and Labour Making holes for 300 mm dia exhaust fan of suitable shape & size into or through brick walls at Ground / First / Second floor including plastering for making good to the original / Existing surfaces of any description disturbed including painting /distemper matching with the existing colour complete all as specified and as directed by Engineer-in-charge. Note : Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site and nothing shall be paid extra on this account.
Supply and fixing Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete with louver shutter including fixing rawl plug/nut & bolts complete all as specified and as directed by Engineer-in-charge.
Supply and fixing / installation of storage type water heater (Geyser) electrical operated 230/240 Volts , 25 ltr capacity, BEE 5 star rated conforming to ISI fixing with 4 Nos. rawl plug of suitable size (4"-6") nuts & bolts, grouting work in RCC /Brick wall complete all as specified and directed by Engineer-in-Charge.
Cutting of exisiting GI pipe line of size 15 /20mm / 25mm dia for insertion of tee or GI fiitings and as directed by Engineer-in-charge.Note: Tee or GI Fiitings shall be measured and paid seperately under respective item of Schedule 'A' BoQ.
Supply and fixing (concealed in wall or as directed) single pole and neutral sheet metal enclosure (geyser Box) with a two pin and earth plug and socket complete with one single pole MCB of capacity 32 Amps, 240 volts, AC supply, complete all as specified and directed by Engineer-in-Charge.
Supply & fixing stop valve/angle valve cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed both end for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge.
Supply & fixing 600 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.
Supply & fixing bib tap cast copper alloy, chromium plated, fancy type with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge.
Material and Labour TEE or GI fitting of size 15mm / 20mm / 25mm complete all as specified and as directed by Engineer-in-charge.
Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 70 Sqmm 3.5 core conforming to IS-7098 (Part-I -1988) complete including taking out old unservicable cable and old bricks all as specified and as directed by Engineer-in-Charge. (Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately)
Material and Labour sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified. (Note:- Punned thickness shall be considered for payment purpose)
Supply and laying Best quality, locally available, sub class ‘B’ burnt clay bricks (Old Size) for cable protection cover, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for GI tubing light graded 100 mm including all fitteings / accessories for encasing cables for mechanical protection, laid under plinth / floors / path / culverts with complete accessories such as bends/sockets/reducers/saddles incl necessary threading/drilling works complete all as specified and directed by Engineer-in-charge
Supply & Fixing Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing Aluminium strip 20mm x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing Test point terminal block made of gun metal or phosphorus bronze size 75mm x 75mm x 25mm drilled and screwed including 3 nos, 8mm dia and 25mm long hex. head screw complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing GI tubing, light grade 32 mm bore complete with all fittings for cable protection, fixed along poles or laid under floor , under road and hardstanding etc. and making good after laying of cable complete all as specified and as directed by Engr - in- Charge.
Supply and fixing powder coated aluminium peg stey 150mm long complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing aluminium tower bolts 100mm fixed with screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing aluminium tower bolts 200mm fixed with screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing aluminium door lock vertical type , 4 levers size 100mm complete all as specified and as directed by Engineer-in-Charge.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ
Singla Enterprises
M/s MITTAL CONSTRUCTIONS
M/s PANKAJ KUMAR
M/s Kamal Builders
V K CONTRACTOR
SHARDA ENTERPRIES
N.G BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .