Complete wiring in new weighbridge room and arrangement for providing power from Over head line at Burhar Siding of Sohagpur Area.

Amount

Complete wiring in new weighbridge room and arrangement for providing power from Over head line at Burhar Siding of Sohagpur Area.

Part-A Erection of metalic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size ) fondation including excavation and refilling etc. as required. Erection of pole above 8.0 metre and upto 11.0 metre Details of cost for one No pole"

Wiring for light point / fan point /exhaust fan point /call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core in surface / recessed midium class PVC conduit with piano type switch, phenolic laminated sheet, suitable size MS. box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as reuired Group A COST FOR 01 POINT

GROUP A , Wiring for light / power plugwith 2x4 Sq mm FRLS PVC insulated copper conductor single core cable in surface / reccesed medium class PVC conduit alongwith 01 No. 4sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. COST FOR 50 METER

Supplying and fixing suitable size GI box with madular plate and cover in FRL Sonet on surface or in recess, including providing & fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A Modular switch connection etc, as required. COST FOR EACH.

Supplying and fixing suitable size GI box with madular plate and cover in front on surface or in recess, including providing & fixing 3 pin 5/6 A modular socket outlet and 5/6 A switch connection etc, as required. COST FOR EACH.

Wiring for circuit /submain wiring along with earth wire with following sizes of FRLS PVC insulated copper, conductor single core in surface / recessed medium class conduit as required. 4X4 sq mm + 2X4 sq mm earth wire COST FOR 50 meters

Supply, installation, testing and commissioning of 1200mm sweep, BEE 5 star rated, ceilling fan with brushless direct current (BLDC) motor, class of insulation :B, 3 nos. blade, 30cm long down rod, 02 nos. conopies, shackel kit, safety rope, copper winding, power factor not less than 0.9, service value (CM/M/W) minimum 6.00, Air delivery minimum 210 cum/min, 350rpm (Talrance as per IS: 374-2019), THD less than 10% , remote or electronic regulator unit for speed control and all remaining accessaries including safety pin, nut bolts, washer temparature rese = 75 degree C (Max), insulation rasistance more than 2 mega ohm suitable for 230V, 50Hz, single phase AC safety earthing etc. complete as required.

Earthing with copper earth plate 600mmX600mmX3mm thick including accessaries and providing masonary enclosure with cover having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salts required. Details of cost for 30 meters.

Supplying and fixing following rating, four pole ( three phase and neutral) 415Volt residual current circuit breaker (RCCB), having a sensitivity current 30 milli Aeres in the existing MCB DB complete with connection, testing and commissioning etc. as required. 63A

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreader s in existing cubicle panel board including drilling holes in cubicle panel, making connection etc. as required. 100A, 16KA details cost for each.

Supply and fixing MV horn gap lightening arrester as required

Part-B Erection of metalic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size ) fondation including excavation and refilling etc. as required. Erection of pole above 8.0 metre and upto 11.0 metre Details of cost for one No pole"

Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

Total impact of GST for the purpose of CTC

M FAIYAZ CONTRACTOR