Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
Refer Docs
EMD Value
₹16,600
Closing Date
11 May 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Director, NIOT
NIOT campus, velachery to tambaram main road, pallikaranai, chennai
Canteen modification work at NIOT Campus
2023_NIOT_751712_1
NIOT/SnP/EnM/29625(R)/2022-23
Open Tender
Civil Works
Works
NIOT CAMPUS, CHENNAI
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹16,600
Yes
11 May 2023
3 May 2023
11 May 2023
3 May 2023
11 May 2023
3 May 2023
3 May 2023 - 10 May 2023
Amount
Demolishing of brcik work manually/by mechnaical means including disposal of material within 50 metres lead as per direction of Engineer in charge. In cement mortar
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. .
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:4 (1 cement : 4 coarse sand).
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand)
15 mm cement plaster on the rough side of single wall of mix : 1:6 (1 cement : 6 fine sand)
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform as directed by Engineer in Charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Steel reinforcement of R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto counter slab level as per direction of Engineer in Charge. Material : Thermo-Mechanically Treated Bar
Supplying and fixing of 25mm thick cuddappa slab for wall mounted cup board with necessary cutting, edging and neat finishing with cement mortar 1:3 (1cement: 3 fine river sand) all complete as per direction of the Engineer In-charge.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- charge, in skirting, risers to steps and dados over 12mm thick bed of cement Mortar 1;3 (1cement :3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade,colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil for connecting sewage pipe line 6" dia. Location : Main Canteen
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Providing and fixing of UPVC windows made of Upvc Profile section having profile size of 74mmx60mmx56mm having outer wall thickness of 2.30mm(+/- 0.3mm) with 3 box multi chamber hollow construction.The shutter of casement window shall be made size 104mmx60mm having outer wall thickness 2.30mm(+/- 0.3mm) and fixed mullion of size 72x60mmx36mm having outer wall thickness of 2.30mm(+/- 0.3mm) .The shutter will be provided with suitable uPVC beads of size 34mmx18mm for glazing for the specified glass (single).All profiles of frames, sash ,and mullion shall be reinforced with galvanised mild steeel section of 1.2mm wall thickness, at whatever required .The door shall be 3D hinged for better weight capacity .Door has to be provided with variety of security device like muti point locksystem with cylinder lock facilitated handle,compliant with relevent specification and as directed by EIC.The door shall have 5mm thick single glass at top half and 20mm thick multichambered hollow uPVC panel at bottom made of uPVC profile of dimension 150x20mm which will be joined with each other with tongue &groove method.The door shutter will have a horizontal mullion to distribute the glass & the panel.All the corners and mullion joints of the frame &sash shall be mitred cut & fusion welded without any mechanical joint.All profiles in the window must duly cut at correct degree &fitted with neccessary EPDM weather sealed gaskets and including other neccessary fittings etc.,complete as directed by EIC. Openable uPVC Door.
providing and fixing of uPVC window frames having 2tracks for 2 shutter of upvc profile section of size 62x60X60mm having outer wall thickness of 2.30mm(+/- 0.3mm) with 3 box multi-chamber construction.sliding shutter shall be made of 66mmx42mmx50mm having outer wall thickness of 2.30mm(+/- 0.3mm).All profiles of framess and sash shall be reinforced with galavanised mild steel section of 1.2mm wall thickness, at where ever required.All the corners and joints of the frames & sash shall be mitred cut & fusion welded without any mechanical joint.All welded joints are neatly trimmed & feature grooved/raised rib finish so as to make the finished products free from all sharp edges & burrs.system shall have adequate drainage mechanism to permit the escape of water from horizontal member beneath each sealed unit. system shall be provided suitable uPVC beading for glazing of size 24.5mmx16mm for fixing 5mm thick glass and interlocking profile of size 45mmx36mm, duly cut at degree & fitted with EPDM gaskets.windows has to be provided with varity of security device like touch/cresent lock.Nylon rollers etc as per requirement,compliant with relevant specification and as directed by EIC.The complete window shall be fixed into the prefinished opened places,by drilling & fixing through the outer frame using high quality fasteners &silicon sealent is appiled to fill up the gap between wall & window frame for leakproof installation, and complete. TWO TRACK SLIDING uPVC WINDOW.
providing and fixing of uPVC window frames having 3tracks for 3 shutter of upvc profile section of size 112x52X112mm having outer wall thickness of 2.30mm(+/- 0.3mm) with 3 box multi-chamber construction.sliding shutter shall be made of 66mmx42mmx50mm having outer wall thickness of 2.30mm(+/- 0.3mm).All profiles of framess and sash shall be reinforced with galavanised mild steel section of 1.2mm wall thickness, at where ever required.All the corners and joints of the frames & sash shall be mitred cut & fusion welded without any mechanical joint.All welded joints are neatly trimmed & feature grooved/raised rib finish so as to make the finished products free from all sharp edges & burrs.system shall have adequate drainage mechanism to permit the escape of water from horizontal member beneath each sealed unit. system shall be provided suitable uPVC beading for glazing of size 24.5mmx16mm for fixing 5mm thick glass and interlocking profile of size 45mmx36mm, duly cut at degree & fitted with EPDM gaskets.windows has to be provided with varity of security device like touch/cresent lock.Nylon rollers etc as per requirement,compliant with relevant specification and as directed by EIC.The complete window shall be fixed into the prefinished opened places,by drilling & fixing through the outer frame using high quality fasteners &silicon sealent is appiled to fill up the gap between wall & window frame for leakproof installation, and completion. THREE TRACK SLIDING uPVC WINDOW.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge.The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Apporved make :TATA, Jindal, JSW
Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Supplying and fixing of 6" PVC pipe for kitchen waste from washing area outlet to Collection chamber including all fittings complete as per instruction of Engineer In-charge.
Providing and fixing of stainless steel Jali (Greating) with or without hole for waste pipe for floor/Nahani trap 6"dia weight not less than 100gms. All complete as per the direction of Engineer In-charge.
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
Providing and fixing C.P. brass angle valve for sink/wash basin and geyser points of approved quality conforming to IS:8931) 15 mm nominal bore
Providing and fixing Salem Stainless steel AISI - 304 grade kitchen sink of size 600x450x220mm with 50mm Dia CP brass waste coupling and pvc waste pipe,15mm Dia PVC connection with CP brass nuts and necessary CI brackets/SS bolts etc complete as directed by Engineer In-charge.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes
Supply and fixing of 63.5 mm dia PVC pipe with necessary hardware fitting of elbow, Tee, coupling, bend etc complete as per the direction of the Engineer In-charge.
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per instruction of Engineer In-charge.
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per instruction of Engineer In-charge.
Wall painting with plastic emulsion paint of approved brand and manufacture to give and even shade. All complete as per insturction of Engineer In-charge.Two or more coats on old work.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work
Vertical Blinds: Providing and fixing vertical blinds 100 to 150 mm wide (imported materials) as per manufactures specifications to match the existing colour and quality as per instruction of EIC.,(NIOT standard). The rate inclusive of Providing and fixing of vertical blinds M' track and powder coated aluminium channel, runner, end cap, fixing of brackets, brackets fixed with C.P. brass screws and wooden plugs, transportation, handing and fixing in position etc all complete as directed by the Engineer In-charge. The successful contractor should submit sample to NIOT which will be jointly inspected by NIOT. The colour of the vertical blinds will be decided at the time of supply by the NIOT. Location: VIP dinning
Repairing of existing Damaged mica sheet and providing and fixing of new 1.0 mm thick laminate sheet (colour and shade of mica sheet to approved by EIC) with necessary adhesive (fevicol only) etc. all complete as per directed by the EIC. (for lamination over drawer boxes in table and replacing mica in cupboard, canteen cashier table, other counters etc .) Approved make for Laminate: Sunmica, Formica, Sendek.
Removing existing damaged drawer lock and Supplying and fixing of 50mm dia CP Brass Drawer lock with necessary arrangement etc complete as per directed by the Engineer In-charge.
Providing and fixing of 19 mm thick BWR plywood for using hardware fittings of SS hinges, Tower bolt, cupboard lock, S.S Handle, S.S Runner etc all complete as directed by the Engineer In Charge (For making of drawer box and runner drawer box, shutter) Before quoting the rate contractor should visit the site.
TOTAL WITHOUT GST
GST at 18%
KAVERI ELECTRICALS
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .