SPECIAL REPAIR TO SQUASH COURT AT BASOLI UNDER GE BASOLI

Amount

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed .

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed .

Supply and fix Factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified

Supply and fix for Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt,complete all as specified and directed.

Supply and fix for mild steel cold rolled butt hinges medium weight 75 mm long complete all as specified and directed.

Supply and fix 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-90gms). complete all as specified and directed.

Taking down steel water tubing of 15/20mm dia including all fittings complete all as specified and directed.

Supply and fix for Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

Supply and fix Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) with and including shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms)complete all as specified and directed.

Supply and fix for Steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

Supply and fix for Decorative curtain rod with fixing brackets, stops, rollers etc complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Material and labour for Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for Rendering 15mm thick in cement mortar 1:6 and finished even and smooth without using extra cement including preparation of new plastered surfaces complete all as specified and directed.

Material and labour for Running welding in repairs not exceeding 2.5cm in length, thickness of metal to be welded n.exc 6mm complete all as specified and directed.

Material and labour for preparation of old steel and iron surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and Labour for preparation of new plastered surfaces and applying Two coats cement base paint over a coat of primer on walls complete all as specified and directed

Material and Labour for preparation of new plastered surfaces and applying 3mm thick wall care putty and applying two coats of plastic emulsion paint over a coat of primer on walls complete all as specified and directed

M&L for providing 75mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Plain cement concrete 25mm thick 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in floor complete, all as specified and directed .

Plain cement concrete 75mm thick 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub floor, sub base complete, all as specified and directed.

Material and labour for Non Skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and brushing neat cement slurry with 3 kg of cement per sqm over and including Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying tiles and Complete all as specified and directed.

Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and brushing neat cement slurry with 3 kg of cement per sqm over and including Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying tiles Complete all as specified and directed.

Material and labour for Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed.

M&L machine cut kota slab fooring 20-25mm thickness over 15mm thick cement screed base in CM 1:4 laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing including 25mm thick PCC 1:2:4 type B-1 complete all as specified and directed.

M&L machine cut kota slab 20-25mm thickness for skirting or on riser of steps over 10mm thick rendering in CM 1:4 laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing complete all as specified and directed.

Supply and fixing 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including flush pipe and connection to pipe complete all as specified and directed.

Supply and fix 15mm dia bore Stop valve fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, complete all as specified and directed.

Supply and fix ball brass valves, high pressure, (ISI Marked) with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for 20 mm bore of pipe complete all as specified and directed.

Supply and fix Gun metal gate valve for 20 mmm bore of pipe with iron wheel head, screwed both ends complete all as specified and directed.

Supply and fix sinks made of stainless steel 1mm thick overall size 495mmx420mm bowl size 410mm x 330mm x160mm for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar connecting union to pipe, GI waste Pipe 32mm from sink to nahani trap of approved brand including cost of materials, adhesive solution, including coupling and with a pair of suitable C.I. brackets including painting the brackets with two coats of approved paint cutting holes in walls and making good the same etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any discription and in any position complete all as specified and directed.

Supply and fix Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolt, PVC sheat cover and butterfly jet spray with necessary connection and exc flushing cistern and flush pipe, complete all as specified and directed.

Supply and fix in repair for vitreous china wash hand basin white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed.

Supply and fix in repair Vitreous china bowl urinal Half stall type (white) minimum with grating and union for discharge pipe including PTMT spreader of any colour for fixing with 15mm dia pipe of Hindware or Cera mark complete all as specified and directed..

Supply & Fix in repair vitreous china urinal partition white of size 310 x 700mm of Hindware or Cera mark.complete all as specified and directed..

M&L for PVC (SWR) vent cowl of 75mm dia complete all as specified and directed..

M&L for PVC (SWR) vent cowl of 110mm dia complete all as specified and directed..

Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed.

Supply and fix Tubular towel rail, 20mm dia, D-type, 600mm long between flanges brass chromium plated fixed with rawl plug etc complete all as specified and directed.

Dismantling sheets (Corrugated, Semi corrugated, etc,) in roof covering complete all as specified and directed .

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .

M&L Mild steel Hand rails, half round or other stock section or core for wooden hand - rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc; wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete.all as specified and directed

Material and labour for Roof trusses (framed) ,trussed purlins, crane gantries , rails and fastenings and heavy bracket framing (beams, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe 410-W (Gde-E-250) quality -A complete all as specified and directed.

Supply and fix for MS Screw bolts machine made 11 mm to 15mm dia length exceeding 10 cm and n.exc 15 cm with hexazonal or sqrs heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexazonal of sequare nuts etc , complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises of defence land complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed.

Soakage well in exc in ordinary soil, foundation in PCC 1:3:6 walls of honey combed and solid in M-30 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-30/ RR masonry/ Filling with brick bats, complete of size 1.8M dia X 3.0M effective depth, all as specified and directed as per Engr-in-Charge and shown on Drg No CE/TD/1203/2003 sheet 1/2 and 2/2.

M&L Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick , set, jointed and pointed in neat slurry in with grey cement and pigments over and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying tiles,complete all as specified and directed.

M&L Anti-termite treatment to the top surface of filled earth at the rate of 5 Ltr per sqm of surface complete all as specified and directed

M&L for 2nd class hard wood scantling, clean sawn and unframed work complete all as specified and directed.

M&L for 2nd class hard wood Weather boarding, clean sawn, plain, thickness 20 mm to 25 mm and ribated on thick edge to give 20 mm lap and fixed complete all as specified and directed.

M&L for 2nd class hard wood Boarding in floors and skirting planed one side & edges tongued and grooved or rebated, thicknes is 25 mm complete all as specified and directed.

M&L for French Polishing on Surfaces of any description,Width or girth Including Cleaning and Preparing the Surface Including a Coat of Wood Filler on New Works with two or more coats complete all as specified and directed.

Supply and fix 12mm thick veneered decorative Ply wood grade I (with BWR resin ) with decorative face veneers on both faces fixed with screws to timber frame work. complete all as specified and directed.

Supply and fix Brass Mortice lock, vertical type, size 100 mm and fixed 4 levers complete all as specified and directed.

Supply and fix Door closer hydraulically regulated, designation No 3, universal type suitable for door shutters of weight between 61 to 80 kg complete all as specified and directed.

Supply and fix for Powder coating anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fix for Powder coating anodised aluminium door shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber/neoprene packing, handles 2 No's in each door, hinges, anodised aluminium snap beading, screws etc including all fixing arrangement complete all as specified and directed.

S&F 12mm thick Toughened and frosted glass with stainless steel (Grade-304L) struds and bolts on all edges as per site requirement with standard make complete all as specified and directed.

S&F Glass door of 12mm thick Toughened and frosted glass with stainless steel (Grade-304L) struds and SS handles, locking arrangements and all necessary fittings as per site requirement with standard make complete all as specified and directed.

Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixedcomplete all as specified and directed.

S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed..

S&FGalvanised MS wire cloth 0.63mm nominal dia of wire and average width of aperature 1.40mm, complete all as specified and directed..

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for Point wiring with 1.5 Sqmm (nominal area)copper conductor FRLS cable (Multi stranded) PVC insulated and unsheathed in and including concealed PVC rigid non metallic conduit (ISI marked) with sunk cast iron/pressed steel terminal boxes of suitable size with 3mm thick plastic laminated sheet for light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed with colour code earth wire connected to common earth dolly complete all as specified. Note : (a) Unit rate include for cutting chases for conduit and sinking for boxes and making good to wall, floors etc. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

All as per item No 72 but for one 3 pin 5 Amp socket outlet on independent board complete all as specified and directed.

All as per srl item No 72 but one bell/buzzer point controlled by one push button complete all as per specified and directed.

Material and labour for Point wiring with 2.5 Sqmm copper conductor FRLS cable (Multi stranded ) PVC insulated and unsheathed cable conductor in and including concealed PVC rigid non metalic concealed conduit (ISI marked) of suitable size with metal flush boxes of adequate size with cover plate for one 3 pin socket outlet 15 amps on independent board incl continuous 2.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed cable earth wire connected to common earth dolly complete all as specified. Note : Unit rate for cutting chases for conduit and sinking of boxes and making good to wall,floor ceiling complete all as specified and directed by Engineer in charge. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

Supply and fix Switch piano, flush type single pole, one way 5 Amp. complete all as specified and directed.

Supply and fix Switch Bell push, flush type, 5 amp complete all as specified and directed.

Supply and fix bell ding dong, 230 V complete all as specified & directed. complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 5 pin, 5 Amp flush type universal. complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 6 pin, 6 and 15 Amp flush type universal. complete all as specified and directed.

Supply and fix ceiling rose surface bakelite, two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

Supply and fix in replacement LED tube light fitting 1 x 16 watt, 230v including tube rod with polycarbonate diffuser , of 4 feet long industrial type ,complete with all accessories and pre-wired incl all necessary electric connection with three core copper cable 23/0.0076 complete all as specified and directed.

Supply and fix LED ceiling light fitting flush mount ceiling including LED lamp 10 watt, lamp holder etc ,complete with all accessories and pre-wired incl all necessary electric connection with three core copper cable 23/0.0076 complete all as specified and directed

Supply and fix in replacement flood light of capacity 100 watt energy saving and enviromental friendly with protection IP-66 made out of pressure die cast aluminium housing suitables lens and lightened high power LED as light source with electronic chip and driver complete all as specified and directed. "Cat Part No PCGLFT10210057, 5700K and equivalent in Bajaj/ Philips/CG"

Supply and fix for sheet metal powder enclosure powder coated versatile double door SPN 12 way distribution board for MCB provisions fitted with copper bus bar rated, neutral link , earth bar and din rail suitable for use on 240Volt, 50Hz complete all as specified and directed.

Supply and fix exhaust fan 300 mm sweep with louver complete including making all arrangement for holes in brick / stone massonery wall of any thickness grouting of nuts / bolts in wall complete all as specified and directed

Material and labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe with funnel with wire mesh at top, 15 mm bore light grade earth lead protection pipe upto main board with RCC cover suitable handle and angle iron frame for pit top and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include the cost of earthing wire and protection upto 7.5 metre length.)

Supply and fix in repair for MCB SP 5 to 32 Amps with 10 KA 'C' Series breaking capacity complete all as per specified and directed.

Supply and fix in repair for MCB SPN 40 amps with 10KA 'C' Series breaking capacity complete all as per specified and directed.

BALKRISHAN GUPTA AND SONS

Ms International Engineers

Standard engineers