Dismantling of OHT and Construction of OHT at Narayana Swamy koil Street and Pandiyapuram Street at ward No 19

Dismantling the Damaged RCC including labour charges etc., complete.

Dismantling the Brick Work including labour charges etc., complete.

Removing the building materials and Debries lorry including loading and 2Km lead including all labour charges etc., complete.

Removing the Damaged G.I Door Size of 1.00 X 2.00 including labour charges etc., complete.

Removing the Repair Motor including labour charges etc., complete.

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying , fabricating and placing in it position of MS or RTS rod including the cost of steel & Binding wire, labour charges for cutting, bending, placing & tying with grills and conveyance etc., complete.

Providing steel centering for sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with props, With all cost and conveyance of materials and lab our at site ect ., Complete as per standard specfication.

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Brick work in cement 1:5 mix using well burnt country bricks of size 83/4"x41/4"x23/4" including all cost and conveyance etc completeas per std specification

Special ceiling Plastering cement mortar 1: 3 mix 10mm thick including cost and conveyance all materials etc. completeas per std specification

Plastering with cement mortar 1: 5 mix 12mm thick including cost and conveyance all materials etc. complete

Providing polished cuddapha slab of 20mm to 30mm thick for shelves, cupborards, cover slabs etc., and pointing with cement mortar 1 : 3 ( One cement and three sand) and mixed with black oxide and finished smooth etc., complete.

Dadooring the walls with Coloured glazzed square tiles of size 150mm x 150mm x 6mm thick of best an aproved quality set in CM 1: 2, 10mm thick and pointed with white cement using 0.4kg /m2 in all floors as directed etc., complete complying with standard specification. (SD 261A)

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Supplying fixing of M.S sheet doors and widows and Grills including all cost and conveyance of materials to site and all labours charges for etc. complete

Supply and fixing of 1 HP compressor with motor including all accessories and oil etc complete.

Supplying of following pipes and special including cost and conveyance all materials etc. complete

1" GI pipe

1" GI union

1" GI elbow

1" GI tee

1" GI coupling

1" G.I Hex Nipple

1" x 1/2" GI Reducer

1/2" GI pipe

1/2" GI union

1/2" GI elbow

1/2" GI tee

1/2" GI coupling

1/2" G.I Hex Nipple

1" Hose color

1/2" Hose color

1" PVC Pipe

1" PVC Coupling

1" PVC Tee

1" PVC Ellbow

3/4" PVC Pipe

3/4" PVC Coupling

3/4" PVC Tee

3/4" PVC Ellbow

3/4" x 1/2" PVC Reducer

3/4" G.M Gate valve

15mm SD tap

Solventcement

Supply and run of 2 of 4 sq.mm(56/0.3) PVC insulated SC unsheathed Cu.conduction of 1100V on 7/20 GI bearer wire for service connection mains. (SD 65)

Supply and run of 2 of 6 sq.mm.(84/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (class 'B' ) suitably bent at both ends with neccessay angle iron upright and end support for mains (SD 69)

Supply and fixing of 16 Amps DP Switch with metal clad of 500 V with fuse and neutral (Side Handle) on suitable TW Box PWD Earthing(SD 141)

Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masony. (SD 233)

Supply and fixing of 15A aeriual fuse unit(500A) on suitable 100x100 mm TW concealed box with hylem sheet on on the tapping pole with necessary clamps (SD 128)

Supply and Fixing of TNEB meter Board suitable for 32A single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1"x1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection with 7/20 PVC insulated copper wire from EB meter to fuse unit,(SD 125).

Supply and Fixing of 5A or 10 Amps AC Single phase 230 V , 50 HZ watt hour metre on Suitable TW box complete with earth connections. (SD 124)

Errection of pipes and specials in to borwell and conneckion 1.00 HP compressor motar etc., complete as per standard specification

Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. switch box with 5amps F.T. switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wireconnection of 14 SWG wire for open Light point/fan point [ SD No. 21 ]

Supplying and fixing of water tight Bulk head fitting with guard (Philips /bajaj /crompton /Klite) suitable for incandescent lamp and 60W bulb

TNEB charges for new service connection main including all cost and conveyance etc., complete.

Painting two coats with approved Interior and Exterior Emulsion paint over cement plastered wall surfaces including cleaning preparing the surface and quring etc complete asper standard specification.

Painting two coats with ready mixed approved paint over New steel surface including cost and conveyance all materials etc. complete