Cannt Panchal Ghat road to Swargdham drain repair work

Earth work in excavation in cutting or in embankment in ordinary soil, Excavation to be in the from of regular pits not exceeding 1/2 metre depth and earth work in embankment to be in 20 cm. layers including ramming & dressing the surface to the required levels and slopes and also 1.5 metre lifts and 3.00 Km. lead and excluding royalty

Excavation in foundation in ordinary soil including lift upto 1.5 mts and lead upto 30 mts & including filling, watering and ramming of excavated earth in to the trenches or into the space between the sides of foundations

Dismantaling of jack arched or wooden beams and bajara roofs including beams and roof only for roof concrete concrete and including stacking of dismentaled materials as directed by Engineer-In-Charge witin a distance 60 mtr(200 feet) as per si no 696

Concrete with 4 cm. gauge brick ballast, fine sand and cement in proportion of 12:6:1 in foundations including supply of all materials, labour and T & P etc. required for proper completion of work

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401

M 150 brick work in 1 :4 cement and C. sand of 2.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of work

12mm thick plaster with one part of cement and four part of approved coarse sand over brick work minimum thickness not to be less than 1Cm. Including supply of all materials labour and T&P etc. required for proper completion of the work

Cement Concrete Slab with 2 cm. gauge approved stone grit, approved coarse sand and cement in proportion of 4:2:1 in pavement for c.c. road for proper completion of work and also including complete shifting of material & concrete etc

Cement Concrete Slab with 2 cm. gauge approved stone grit, approved coarse sand and cement in design proportion in pavement for c.c. road (M 30) for proper completion of work and also including complete shifting of material & concrete etc. as per technical Specification Clause 1501 (approved Quarri grit) |

R.C.C. work with cement, approved coarse sand and 2cm gauge approved stone grit in proportion of 1:2:4 in slabes, including supply of all materials, T&P etc. required for proper completion of the work. as per S.I. NO 283 | ou calculate any specific volumes based on these items?

Mild steel Iron work in plain work such as reinforced concrete or reinforced brick work including bending for proper Shape and supply of all steel and wastage & all cost of complete. |

Painting lines, dashes, arrows, etc. on roads with hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 |

Supply and Fixing of Pavement Maker (Cat Eye) Type X- ASTMD-4956-04 Avery denision V3-M (USA MAKE) consisting of ASA Plastic housing fitted with tightly adherent ploting compound. The housing shall contain prismatic to Glass covered prismatic reflecting face to reflect incident light |

Dismantaling of B.O.E. soling /interlocking tiles including stacking of dismentaled materials as directed by Engineer-In-Charge witin a distance 50 mtr(labour only) as per si no ch 13(19 NI) |

Providing and Laying 80 mm thick interlocking Paver Bricks incuding all complete. |

Supply and Fixing sighn Board including all cost complete. | Would you like me to export this data into a structured Excel-compatible table or help you calculate any specific volumes based on these items

Please Enable Macros to View BoQ information