Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹6.1 L
Closing Date
24 Jun 2026, 10:30 pm6d left
Similar tender results from the same govt authority in the past 3 years.
Bengaluru Water Supply And Sewerage Board
WORK OF PROVIDING AND COMMISSIONING OF BIOGAS ENGINE AT 60 MLD STP AT CHALLAGHATTA VALLEY COMING UNDER EE(WWM-TV) DIVISION (2nd Call)
305484
BWSSB/2025-26/WT/WORK_INDENT3126/CALL-2
Open
Water /sewage treatment tanks
BWSSB Chief Engineer WWM East Bengaluru
6 documents required · 6 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
As a Prime Contractor, the tenderer should have satisfactorily completed at least one similar nature of Sewage Treatment Plant with Bio Gas generation (Methane) by treatment of Sludge with anaerobic digester of value not less than Rs.239.43 lakhs.
The tenderer should have executed in any one financial yearThe firm should have carried out Sewage Treatment Plant of 48 MLD Capacity with Bio Gas generation Methaneby treatment of Sludge with anaerobic digestor and capacity of Bio gas engine of 0.70MW
liquid assets and /or availability of credit facilities of no less than Rs 119.72 lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.
The tenderer should have in the last 5 years period achieved in at least two financial years an minimum financial turnover (in all classes of civil engineering construction works only) of Rs.957.72 lakhs
Assessed available tender capacity AxNx1.5-B should be More than Rs. 478.86 Lakhs
Contractor Should have Registration in KPWD or BWSSB etc as per KTPP norms
Form of Tender With a Company Letter Head.
₹5,000
₹6.1 L
10 Jun 2026
10 Jun 2026
25 Jun 2026
17 Jun 2026
17 Jun 2026
WORK OF PROVIDING AND COMMISSIONING OF BIOGAS ENGINE AT 60 MLD STP AT CHALLAGHATTA VALLEY COMING UNDER EE(WWM-TV) DIVISION
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete of design mix M10 with OPC minimum cement content at 240Kgs using 40 mm and down size graded granite metal course aggregates and the fine agregat...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position Reinforced cement concrete of design mix M 25 for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto ...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...
Providing and laying 230 mm thick rubble packing in plinth with approved stone, set in regular lines, hand-packed, filling the interstices with approved small stone chips and sand, consolidating by ra...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete of design mix M10 with OPC minimum cement content at 240Kgs using 40 mm and down size graded granite metal course aggregates and the fine agregat...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
form work for foundations @ 8%
form work for columns@70%
form work for Beams@ 60%
form work for Roof@50%
form work for Chejja@45%
Providing and laying in position Reinforced cement concrete of design mix M25 for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Providing and laying in position Reinforced cement concrete of design mix M 25 for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto ...
Providing and laying in position Reinforced Cement Concrete of nominal mix M15 with 20mm and downsize graded granite metal machine mixed, concrete laid in layers not exceeding 15 cm thick, vibrated fo...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...
Providing and constructing precast concrete solid blocks with compressive strength not less than 35kg. per sqm with cement mortar 1:4 masonry (quoin, Jamb, closer blocks) with solid concrete blocks of...
Providing plastering to masonry including providing and removing scaffolding rounding of all corners whenever required, smooth rendering curing etc complete as per specifications with burnt brick maso...
Providing plastering to masonry including providing and removing double scaffolding rounding of all corners whenever required smooth rendering curing etc., complete as per specifications with burnt br...
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give...
Providing and finishing external walls in two coats with waterproof cement paint with primer of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt ...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...
Providing, fabricating, assembling and fixing in position anodized aluminium doors using following aluminium mat finished or glossy finishes, outer frame plain section 101.6X44.55 m thickness 3.18mm, ...
Providing and fixing in position anodizes aluminium windows and ventilators as per approved drawings with sliding shutter using double track window frame of section of size 61.85X31.75 with 1.2mm thi...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying 230 mm thick rubble packing in plinth with approved stone, set in regular lines, hand-packed, filling the interstices with approved small stone chips and sand, consolidating by ra...
Supply, delivery, transportation, fabrication and erection of all kinds structural steel including Priming coat of self curing inorganic Zinc silicate of minimum 75micron DFT applied over blast cleane...
Supply,installation & testing of Biogas Blowers of capacity 400 m3/hr @ 0.2 kg/cm2-Feed Blowers Make - Swam
Supply Delivery of SS Piping, Valves and Safety Accessories from Blower to Biogas Engine
Supply,installation & testing of Biogas Engine with Altertnator and Electrical control Panel of capacity 0.85 MW with all necessary required acessories for erection ...
Supply,installation & testing of Biogas Engine Ancillary such as radiator, LT & HT Cooling water system with Heat Exchanger , Ventilation system, Oil lubrication system,with respect to above capacity ...
Electrical Cost (MCC Panel related cabling Engine Room lighting +Earthing)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
PART 15.docx
Design Document • 0.04 MB
Pand ID.jpg
Design Document • 1.40 MB
Sec 7A Tech Prop Form.doc
Design Document • 0.03 MB
Electrical_Single_Line_Diagram_page-0001.jpg
Design Document • 2.69 MB
PART 14.docx
Design Document • 0.12 MB
PART 1.docx
Design Document • 0.04 MB
Bid Doc.doc
Tender Document • 1.32 MB
PART 9.doc
Design Document • 0.08 MB
Part-8.docx
Design Document • 0.09 MB
PART 12.docx
Design Document • 0.17 MB
plant layout.jpg
Design Document • 2.45 MB
PART 13.doc
Design Document • 1.26 MB
PART 3.docx
Design Document • 0.11 MB
Download all tender documents and submit your bid