Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹96,351
Closing Date
14 Oct 2026, 5:00 pm
General Manager(Mech.),E and M, OCC Ltd
office of General Manager(Mech.),E and M, OCC Ltd., Rasulgarh, Bhubaneswar.
Repair. Overhauling, replacement by supply, fabrication, transportation, erection with painting and testing of 10 (Ten) Nos, spillway radial gates of size 12.190 mtr x 12.190 mtr with hoisting arrangements Balimela Dam (Joint ) Project
2026_OCCL_142014_1
E-Procurement Notice No. 16 /OCCL /2026-27 (on-line)
Open Tender
Mechanical Works
Item Rate
180 days
Balimela Dam
Please refer tender documents
3 documents required · 3 mandatory
₹11,800
₹96,351
30 Sept 2026
30 Sept 2026
15 Oct 2026
30 Sept 2026
14 Oct 2026
30 Sept 2026
30 Sept 2026 - 9 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1RADIAL GATES-(Size 12.190 Mtr. x 12.190 Mtr.) | |||||
| 1.01 | Overhauling of trunnion assembly by greasing trunnion pins by grease gun , labour,including hire charges of machinery, equipments, tools & tackles oxygen gas, DA gas etc and as per direction of Engineer-in-charge.. | 10 | SETS | 100 | ₹1,000 |
| 1.02 | Replacement by dismantling & removing old and damaged pressure plates,M.S.flat , Rubber seals,fastners with fitting of new Rubber seals , pressure plate , M.S. flat & fastners (to be supplied by OCCL) including labour, hire charge of machinery, equipments, tools & tackles, oxygen gas, DA gas etc and as per direction of Engineer-in-charge. | 10 | SETS | 100 | ₹1,000 |
| 1.03 | Replacement by dismantling & removing old and damaged guide roller assembly with fitting of new ones (to be supplied by OCCL) including greasing , labour, hire charge of machinery, equipments, tools & tackles, oxygen gas, DA gas etc and as per direction of Engineer-in-charge | 60 | NOS. | 100 | ₹6,000 |
| 1.04 | Painting of upstream & downstream side of 10 Nos. of radial gate including skin plate, horizontal girder, end arm, trunnion assembly after surface preparation by blast cleaning process, performed with sand as per requirements and class 'A' of IS : 14177:1994. After blast cleaning, the surface should be cleaned from loose dust and debris preferably by air blast with help of blower. Over the prepared surfaces two coats of zinc rich primer should be applied to give a total dry film thickness of 70 ± 5 microns followed by two coats of solvent less coal tar epoxy paint applied at an interval of 24 hours. Each coat should give a minimum dry film thickness of 150±5 microns. The total dry film thickness of all the coats including primer coating should not less than 350 ±5 microns as per IS: 14177:1994 including sand, labours, machinery, equipments, scaffolding, paints, primer, thinner,painting accessories etc.(to be supplied by Job-Worker) as per direction of Engineer-in-charge.. | 8,200 | SQM. | 100 | ₹8,20,000 |
| 1.05 | .Replacement by dismantling & removing old and damaged Turn buckles with fitting of new ones (to be supplied by OCCL) including labour, hire charge of machinery, equipments, tools & tackles, oxygen gas, DA gas etc and as per direction of Engineer-in-charge | 10 | SETS | 100 | ₹1,000 |
| 1.06 | Replacement by dismantling & removing old and damaged Socketted wire rope assembly with fitting of new ones (to be supplied by OCCL) and equalising with turnbuckles including labour, hire charge of machinery, equipments, tools & tackles, oxygen gas, DA gas etc and as per direction of Engineer-in-charge. | 80 | NOS. | 100 | ₹8,000 |
| 1.07 | Replacement of worm reducers by dismantling & removing existing one and refitting the same after repair & overhauling ( to be done by OCCL) including labour, hire charge of machinery, equipments, tools & tackles, oxygen gas, DA gas etc and as per direction of Engineer-in-charge | 10 | NOS. | 100 | ₹1,000 |
| 1.08 | Replacement by dismantling & removing old and damaged position indicator with fitting of new ones (to be supplied by OCCL.) including labour, hire charge of machinery, equipments, tools & tackles, oxygen gas, DA gas etc and as per direction of Engineer-in-charge | 10 | NOS. | 100 | ₹1,000 |
| 1.09 | Greasing all gear, pinion, rope drum, bearing & housing, gear oil topping in worm reducer, application of cardium compound on socketted wire ropes, alignment of lineshafts with Testing of Gates & Hoists including labour, hire charge of machinery, equipments , tools & tackles oxygen gas, DA gas etc and as per direction ofEngineer-in-charge | 10 | SETS | 100 | ₹1,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.82 MB
DTCN.pdf
Tender Documents • 1.51 MB
BOQ_611407.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .