Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-Finance | L1 | Accepted-Finance Lowest and reduced tender accepted for award | |
| 2 | L2₹5.3 L+₹29,813 (6.01%)Rejected-Finance | L2 | Rejected-Finance Not the lowest tenderer | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Others-Physical bid documents has not been submitted during Offline Tech bid opening, hence tender not admitted |
Tender Value
₹4.7 L
EMD Value
₹9,450
Closing Date
19 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer(c), BSNL CD, Aizawl
BSNL Civil Division, Admin Building, MG Road, Upper Khatla, Aizawl.
Providing and fixing aluminium partition for DDG office in ETR Satellite building at Aizawl, Mizoram BA
2023_BSNL_166931_1
NIT 12/BSNL/CD/AZL/2023-24
Open Tender
Civil Works - Buildings
Item Rate
60 days
Aizawl, Mizoram
Please refer tender documents
3 documents required · 3 mandatory
₹590
Yes
AO(cash), BSNL, O/o GMTD
₹9,450
20 Oct 2023
6 Sept 2023
23 Sept 2023
6 Sept 2023
19 Sept 2023
6 Sept 2023
Amount
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) :
For fixed portion.Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
For shutters of doors, windows & ventilators (Anodised transperant or dyed to reqd. shade ,minimun anodic coating of grade AC15)
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
Pre-laminated particle board with decorative laminationon both sides
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item)
With glass panes of 5.00 mm thickness (weight not less than 12.50 kg/sqm)
Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine crews all complete as per approved architectural drawings and direction of the Engineer-incharge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).
Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge.
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete :
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screws etc. complete.
Twin rubber stopper
Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete.
Refixing of aluminium work for doors, windows, ventilators and partitions with available extruded built up standard tubular and other sections fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of grade at junctions, at top, bottom and sides with required PVC/neoprene felt etc. complete as per architectural drawings and the directions of Engineer-in-charge.
For fixed portion
For shutters of doors, windows & ventilators
Refixing of available 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
Refixing of available glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item)
(a) With glass panes of 5.00 mm thickness (weight not less than 12.50 kg/sqm)
Providing and fixing 1mm thick homogenous antistatic Poly vinyl sheet flooring laid over smooth and damp proof base using rubber based adhesives of approved quality and manufacturer like Dunlop S-768, Fevicol SR-998 or equivalent including rolling with light wooden roller weighing about 5 kg. etc. complete as directed by Engineer-in-charge,(Rate is inclusive of levveling the tiled surface with POP for any undulations)
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling dismembering and seperating members of aluminium partition like aluminium pipe, beadings,glass , prelaminated board,door closer/floor spring, door shutter etc. and stacking the material as directed by Engineer-in-charge.
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling dismembering and seperating members of aluminium partition like aluminium pipe, beadings,glass , prelaminated board,door closer/floor spring, door shutter etc. and stacking the material as directed by Engineer-in-charge.
P.P. Engineering Works
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .