Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.1 LAdmitted-Finance | L1 | Admitted-Finance |
Tender Value
₹1.5 L
EMD Value
₹2,920
Closing Date
5 Oct 2026, 6:00 pmClosed
EXECUTIVE ENGINEER PWD CITY DN III JAIPUR
EXECUTIVE ENGINEER PWD CITY DN III JAIPUR
Repair and Maintenance of Joinery work in III and IV type qtrs, and Jawahar Nagar Qtrs Under Sub Dn Gandhi Nagar II Jaipur (Job No.-76/SE City/CD-III/2216-Mtc Rep/09/2026-27)
2026_CEPWD_600943_4
NIT 41/2026-27 EE PWD CITY DN III JAIPUR
Open Tender
Repair and Maintenance Works
Percentage
120 days
JAIPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
EE PWD CITY DN III JAIPUR/ MD RISL BY EGRASS
₹2,920
Yes
9 Oct 2026
27 Sept 2026
6 Oct 2026
27 Sept 2026
5 Oct 2026
27 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repair of door, window shutters including cost of material and labour for change of damaged : Aldrop of mild Steel 12" long x12mm dia | 20 | Nos | 162 | ₹3,240 |
| 2 | Repair of door, window shutters including cost of material and labour for change of damaged : Stopper of Aluminium with Double Rubber Gutka | 20 | Nos | 52 | ₹1,040 |
| 3 | Repair of door, window shutters including cost of material and labour for change of damaged : Steel Hinges For Wooden Chowkhat 4" size | 20 | Nos | 37 | ₹740 |
| 4 | Repair of door, window shutters including cost of material and labour for change of damaged : Mild Steel Tower Bolt 6" long | 20 | Nos | 43 | ₹860 |
| 5 | Repair of door, window shutters including cost of material and labour for change of damaged : Steel Handle 6" size | 20 | Nos | 26 | ₹520 |
| 6 | Providing and fixing expandable fastners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/R.C.C. and making good etc. complete 50 mm long | 10 | Nos | 21 | ₹210 |
| 7 | Providing & Fixing drawer handle of approved make for drawers with screws complete as per approved by engineer in charge.
150mm long | 10 | Nos | 215 | ₹2,150 |
| 8 | Providing and fixing to existing door frames. 30mm thick factory made solid both side Pre laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15x15mm top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. | 10 | Sqm | 3,682 | ₹36,820 |
| 9 | Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture’s specification & drawing.(For W.C.and bathroom door shutter). | - | - | - | - |
| 10 | Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to | 5 | Sqm | 908 | ₹4,540 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.67 MB
Tendernotice_2.pdf
PDF • 3.28 MB
Tender_document_New2026_41_4.pdf
Tender Documents • 8.40 MB
BOQ_1065130.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .