Construction of Cement Concrete Road at h/o Om Shivraj Mastar to h/o Devendra Sharma, Sector-F, Govind Nagar, Mathura, Distt. Mathura.

Dismantling Interlocking tiles work in floors/Road laid in dry sand including stacking with 50mtr lead for thickness of tile 60mm to 80mm

Earth work in filling in ordinary soil.

Granular Sub-Base

P/laying in cement concrete1:5:10 (1:cement, 5:courese sand, 10: graded stone ballast 40mm nominal size) including all chargres T&P etc required for propar completion of work D.S.R. S.I. NO 4.1

M-150 Brick Work in 1:4 with Cement & C/Sand mortar.S.I.no.6.1

12mm thick Cement plaster in 1:4 with Cement & C/Sand mortar.S.I.no.582(2)

CEMENT CONCRETE PAVEMENT (C.C ROAD) Construction of un-reinforcement plain cement concrete pavment thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 150.2.2 m 30 (grade) (1:1.5:3) coarse and fine aggregates conforming to IS 383 maximum size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less than 0.2cum capacity and appropriate waight batcher using approved mix design, laid in approved fixed side from work (steel channel laying and fixing of 125 micron thick plastic sheet, wedges steel plates including levelling the from work as per drawing) spreading the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion construction joints applying debonding strips primer, sealent admixtures as approved curing concrete slab for 14 days, curing compounded (where specified) and water finishing to lines and grade as per drawing and technical specification (approved Quarri grit).

80mm Thick Rubber Moulded Interlocking Tiles

R.C.C. work with cement, approved corse sand and 20 mm gauge stone grit in proportion of 1:1.5:3 in excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials. labour T&P etc. required for the proper completion of work.including the cost.

M.S. (tor steel and plain) in plain work such as R.C.C. or R.B. work including for proper shape and including supply of steel & its wastage bend,hooks and authorised overlaping shall be measure and including cost of binding wire.