Infrastructure work like Interior, furniture etc. for stablishment of SIFPSA Office in Mandi Parishad Bhawan (5th and 6th Floor) at 16,A.P. Sen Road, Lucknow

Amount

Providing & Fixing of at all height false ceiling including providing and fixing of frame made of special section power pressed from m.s. sheet and galvonised in accordance with zinc coating of grade 350 as per IS 277 and consisting of angle cleat 25x1.6mm with flanges of 27mm and 37mm at 1200mm c/c one flanged fix to the ceiling with dash fastener 12.5mm dia and and 40mm long with 6mm dia bolt to the angle hangers of 25x25x0.55 mm of required lengthened other end of angle hanger being fixed with nut and bolts to GI channel 45x15x0.90mm running at the rate of 1200 mm c/c to with the ceiling section 0.5mm thick button wedges of 80mm with tappered flenges of 26 mm each having clips of 10.5mm.at 450mmc/ c shall be fixed in direction perpendicular to GI channels with connecting clips made out of 2.64MM diax230mm long GI wire at every junction including fixing the gypsum board with ceiling section and perimetre channels 0.50 mm thick 27mm high having flenges of 20mm and 30mm long ,perimeter of ceiling fixed to wall /partition with help of rawl plugs at 450mm c/c with 25 mm long drive all screws @230mm interval including jointing and fixing to a flush finish of tappered end sq edge of board with recommended filler jointing and tapper finisher and two coat of primer suitable for board as per manufacturers specification and also including the cost of making of openning for light fittings grills diffusers cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of engineer incharge but excluding the cost of painting.12.50mm thick tapered edge gypsum moisture resistant board.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) heet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false eiling tiles of approved texture in the grid including, required utting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI SUB HEAD : 12- ROOFING 878 adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Armstrong MAke-Classic Lite RH-99. or equivalent

Providing and fixing of 8 mm thick Laminated wooden flooring Classification of Use 23/32 (Heavy Domestic/General Commercial) with a Surface Abrasion Resistance of class AC4 (average 4500 cycles), Impact Resistance of IC2 (EN13329), Resistance to Cigarette Burn with a rating of 5 (EN 438-2:15), Swelling after 24 hrs in water of 15% (EN13329), Modulus of Rupture of 53.3 newton/mm2, Internal Bond 1.78 newton/mm2, Surface Soundness of 1.3 newton/mm2 (EN 13329:2000) with a 0.2mm thick wear layer on top of a High Density Fiber substrate core (density > 850 Kg/M3) of plank size 1291 mm X 193 mm having Uni fit locking arrangement (lock strength > 1000 lbs/ft) with an underlayment made of natural colour foam , with accessories like End profile, Transition profile, reducer, etc. complete. The rate includes cost of all materials, accessories, labour, HOM, etc., complete at all levels. (The Shade, pattern etc., to be approved by Engineer in charge)Make-Egger/FloorMaster/Haro/Armstrong/Luxe.

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick no tile adhesive (water based) onforming to IS: 15477, in average 6 mm thickness, including grouting of joints. Size of Tile 600x600 mm.

Providing & Making & Fixing of Wall Panneling made with Aluminium Section of 2"x1" @ 2'CC frame work cladded with 12MM Ply & Finished with 1MM Laminate complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & Making & Fixing All height partitions made with Aluminium Section of 1.75"x1.75" @ 2'CC section frame work cladded with 9mm Ply on Both Side & final Surface to be finished with 1MM Laminate complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing and fixing aluminium work for doors, windows and ventilators and partitions with extruded built up standard tubular sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required Including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Pre-laminated particle board with decorative lamination on both sides on Bottom Partition Member & float glass panes of 5 mm thickness above Mid Partition Member) for fixed portion polyester : powder coated 2 mm thick aluminium section (minimum thickness of powder coating 50 micron). Mak Hindalco or equivalent as per E/I.

Providing & fixing of Flush Door Laminated both side complete with all fittings,Round mortis lock,door closer etc all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & Fixing of Roller Blinds of approved shade as per drawing & specification as approved by Engineer -in-Charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, snd papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing & applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer.

Providing & Fixing of Cupboard at all niches below sill level on all peripherel walls on all floors except first floor with ACP Sliders all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & Fixing of Cement BoardRacks in File Storage area of 2.4 Mtr(Ht) x 0.45 Mtr(Depth) of Total Wall Area on All Floors all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Brick work Class-150 brick work in 1:3 cement and coarse sand mortar in super-structure including necessary cutting and molding of brick work as required and also including honey combed brick work in thickness of wall half brick thick complete. S.I. NO. 6.13.1 +6.14/2020

12 mm. thick plaster with 1:4 cement and coarse sand mortar in single coat on any side single or half brick wall and finished even and smooth. including supply of all material labour T&P etc complete as per direction E/I. S.I. NO.13.4.1/2020

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.SI 10.2

Providing and fixing of Profile sheet on truss frame including supply of all materials labour & T & P etc required for proper completion of the work as per drawing, specification and approved by Engineer -in-Charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, plain window sills, staircases and spiral stair cases,slab above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).SI 5.3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. SI 504

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) SI 4.1.8

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. SI 11.41.2

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 13.47.1

One priming coat & two coat oil distemper on new work including supply of all materials labour & T & P etc required for proper completion of the work

Wiring point for light with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq.mm. FRLSH copper earth contunity wire,modular type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash.

Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq.mm. FRLSH copper earth contunity wire,modular type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash.

Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T & P etc required for proper completion of work.

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

Wiring point for Call Bell with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq.mm. FRLSH copper earth contunity wire,modular type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. S.I 125(B)+187(E)

Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with 1 number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor as earth continuity wire.

Providing Drawing Connecting And Testing Of Enhanced Categoey 4 Pair Lan Local Area Network Cable 24 AWG Conductor Performance Specifide 5E U L and CUL Listed In Existing PVC Conduit .(CAT-6 Network Cable).

Supplying & Fixing Of Telephone Wire 2Pair 0.5Sqmm solid conductor, PE insulated shielded with fine finned copper braid and protected with PVC sheath in the existing surface/ recessed steel/PVC conduit as required.

Supplying & Drawing co-axial TV cable RG-6 grade, 0.7 mm. solid copper conductor, PE insulated] shielded with fine finned copper braid and protected with PVC sheath in the existing surface/ recessed steel/PVC conduit as required. For T.V. Socket outlet.

Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work. asdirected at site by the engineer in charge.

Supply fixing and concealing of 25mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work. asdirected at site by the engineer in charge.

Supply fixing and concealing of 32mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work. asdirected at site by the engineer in charge.

Supply and fixing of recess mounting round 15 mm 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver no complete in all respect. CAT-AAA.

Supply and fixing of 36 Watt to 46 Watt above 3300 leumin indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver no complete in all respect. CAT-AAA.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 50 sq. mm 3-1/2 core.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 70 sq. mm 3-1/2 core.

Supply and fixing of 6Amp to 32Amp SPMCB (10KA) C Curve CAT-A4 Pole Isolator CAT-A.

Supply and fixing of 63Amp 4 Pole Isolator CAT-A.

Supply and fixing of 100Amp 4 Pole Isolator CAT-A.

Supply and fixing of surface/Flush mounting 12ways TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT-A.

Supply and fixing of surface/Flush mounting 12ways V TPN distribution board with additional Door without DPX3 160 MCCB complete in all respect, as directed at site by Engineer in charge. CAT-A.

Supply & Fixing Blank plate for modular plate type switch boards wherever required.

Supply & Fixing of LED Strip Light all complete as per drawing and specification and direction of engineer incharge. Make-Klite, Havells,Philips Equivalent.

Supply & Fixing of LED Strip Driver all complete as per drawing and specification and direction of engineer incharge. Make-Klite, Havells,Philips or as approved

Supply and fixing of 400mm Wall Fan all complete as per drawing and specification and direction of engineer incharge. Make-Klite, Havells,Philips or as approved

Supply and fixing of 150mm Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make--Klite, Havells, Philips or as approved

Supply & Fixing of 24Port Switch all complete as per drawing and specification and direction of engineer incharge. Make-D-Link/Equivalent or as approved

Supply & Fixing of 24Port Patch Pannel all complete as per drawing and specification and direction of engineer incharge. Make-D-Link/Equivalent or as approved

Supply & Fixing of 4U Rack all complete as per drawing and specification and direction of engineer incharge. Make-D-Link/Equivalent or as approved

Providing & Fixing of Modular plate type white RJ 45 CAT 6 Data/Talephone outlet / information outlets ETL verified to meet or exceed TIA / EIA category 6 requirements, universal wiring label permitting to either T568A or T568B, UL listed, for computer networking complete in all respect with cover plate, grid plate, screws, MS box, etc with connections as required with 2nos RJ-45 Data outlet.

Supply and Fixing of recess mounting round 12 Watt COB LED Spot Light having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver no complete in all respect. Make-Philips/Equivalent

Supply, Installation, Testing & Commissioning of Hi Wall Unit 0.66 TR + Corded remote, Make-Daikin, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply, Installation, Testing & Commissioning of Round flow Cassette Unit 2.08 TR + Corded remote, Make-Daikin, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply, Installation, Testing & Commissioning of Round flow Cassette Unit 3.31 TR + Corded remote, Make-Daikin, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply, Installation, Testing & Commissioning of Round flow Cassette Unit 4.13TR + Corded remote, Make-Daikin, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.Model.

Supply, Installation, Testing & Commissioning of Round flow Cassette Unit 4.63TR + Corded remote, Make-Daikin, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge. Model .

Supply, Installation, Testing & Commissioning of Ductable Unit 4.63 TR + Corded remote, Make-Daikin, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply, Installation, Testing & Commissioning of Ductable Unit 6.61TR + Corded remote, Make-Daikin, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply, Installation, Testing & Commissioning of Ductable Unit 8.27TR + Corded remote, Make-Daikin, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply, Installation, Testing & Commissioning of Outdoor connecting kit, Make-Daikin, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge. ( Model BHFP22P1006)

Supply, Installation, Testing & Commissioning of Outdoor connecting kit, Make-Daikin, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Carge. (Model BHFP22P1506)

Supply, Installation, Testing & Commissioning of Wall Type Unit, Make-Daikin, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply, Installation, Testing & Commissioning of Cassette Type Unit, Make-Daikin, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply, Installation, Testing & Commissioning of Ducted Type Unit, Make-Daikin, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each no of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 34.9 mm, all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each no of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 28.6 mm, all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each no of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 22.2 mm, all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each no of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 19.1 mm, all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each no of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 15.9 mm, all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each no of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 12.7 mm, all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each no of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 9.5 mm, all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply & Laying of M S Slotted Angle for pipes and cables horizontaly and vertically along with threaded rod, nut, bolt, saddle, tie etc, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing and fixing rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation. 25 mm dia, , as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing and fixing rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation. 32 mm dia, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & fixing control cum transmission wiring of 2 core x 1.5 sqmm copper in suitable conduits between indoor and out door unit., as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply & Installation of Un-Insulated Square/ Rectangular “GSS” Supply Air Ducting As Per The Approved Shop Drawings. 24 Gauge, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply & Installation of Un-Insulated Square/ Rectangular “GSS” Supply Air Ducting As Per The Approved Shop Drawings. 22 Gauge, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply & Installation Of Thermal Insulation Over The Duct With Xlpe Sheet For The Ducts With 6 Mm Thick One Layer Externally On The Duct, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply & Installation Of Acoustic Lining Of Duct With 25 Mm Thick Fiber Glass Covered With Tissue Paper, Fly Mesh, Gi Screws And Washers., as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply & Installation Of Extruded Aluminum Powder Coated Supply Air/Return Air Linear Grilles, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply & Installation Of Volume Control Damper, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply & Installation Of Canvass Connection For VRV Ductable Type Indoor Units, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply & Installation Of Air Filters, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Steel Conduit As Required. 4 X 10 Sq. Mm + 2 X 6 Sq. Mm Earth Wire, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply & Installation of Executive Table, PLPB Top, Flaper Box, Extruded Aluminium Profile (2400x2100x750), Model-Evoke-1, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Executive Table, Particle Board Top, (2000x1850x750), Model-Exclusive-2, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Executive Table, Particle Board Top, (1950x2000x750), Model-Classic-8, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Executive Table, Particle Board Top, (1500x1650x750), Model-Numero-8, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Workstation Table, Panel Based Partition, Particle Board Edge Banded Top, (1200x600), Model-Stratum-3, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Reception Table, 25 mm Thick PLPB Edge Banded Top, (W1475 X D780 X H1000), Model-Reception-5, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of High Back Chair, PU Seat And Back, Seat Slide, Aluminium PU Arm, Synchro Knee Tilt, Gas Lift, Aluminium Base, Leatherette Tapestry, Model-Civic-1(A), Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of High Back Chair, Wooden Frame, Chrome Cushion Arm, Gas-Lift, Torsion Bar, Aluminium Base, Leatherite Tapestry, Model-Ibex-1, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of High Back Chair, Pipe Frame, PU Chrome Arm, Gas Lift, Chrome Base, Leatherite Tapestry, Model- GS 339, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Medium Back Chair, PU Adjustable Arm, Synchro Tilt, Gas Lift, Mesh Back & Seat Fabric Tapestry, Model-GA 5003, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Medium Back Chair, PP Arm, Gas Lift, Nylon Base, Mesh Back & Seat Fabric Tapestry, Model-GA 5007, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Visitor Chair, Wooden Frame, Chrome Cushion Arm, Chrome Plated, Leatherite Tapestry, Model-Ibex-3, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Visitor Chair, Wooden Frame, Cushion Arm, Chrome Plated pipe stand, Leatherette Tapestry, Model-Civic-3, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Visitor Chair, Pipe Frame, PU Chrome Arm, Chrome Plated Pipe Stand, Leatherite Tapestry, Model- GS 351, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Visitor Chair, Fixed PP Arm, Powder Coated Pipe Stand, Mesh Back & Seat Fabric Tapestry, Model-GA 5005, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Visitor Chair, Without Arm, Chrome Plated Pipe Stand, Mesh Back & Seat Fabric Tapestry, GA 521, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Cafeteria Chair Made of PP Shell Chair With Seat Cushion, Model-GC-9027, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Corner Table, MDF Top With Veneer Polish, MS Gold Finish Leg, (500x500), Model-Regal, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Corner Table, 25mm MDF Top, Chrome Plated Pipe Frame, (500x500), Model-Rosemount, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Center Table, 25mm MDF Top, Chrome Plated Pipe Frame, (1200x600), Model-Rosemount, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Corner Table, 25mm MDF Top, Chrome Plated Pipe Frame, (600x600), Model-Rosemount, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Corner Table, Pipe Frame, Powder Coated, PLPB Edge Bended Top 25mm Thick, (600x600), Model-Concord, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Center Table, Pipe Frame, Powder Coated, PLPB Edge Bended Top 25mm Thick, (900x900), Model-Concord, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of 1 Seater Sofa With Wooden Frame, Powder Coated Leg, Twin Colour Leatherette Tapestry Size in mm - 850 (L) X 800 (D) X 840 (H), Model-Equino-1, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of 3 Seater Sofa With Wooden Frame, Chrome Plated Leg, Fabric tapestry, Size in mm - 2400 (L) X 770 (D) X 760 (H), Model-Rosemount, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of 3 Seater Sofa With Wooden Frame, Powder Coated Leg, Twin Colour Leatherette Tapestry Size in mm - 1900 (L) X 800 (D) X 840 (H), Model-Equino-3, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Discussion Table, Particle board and MDF top(without Flip Up Box) size (4500x1500x750)Model-confereance-5 , Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Meeting Table, Particle board and MDF top(without Flip Up Box) size (5400x1500x750) Model-confereance-5 , Make-Geeken/Equivalent as Approved By Client/E.I

Providing and Fixing of Conference Table Made of 19MM Board, Top in 3 layers and Vertical drop in 3 Lair 19MM ply board. All the surface to be cladded with 4MM Veneer & Having S.S Frame Square Section of 302 Grade. All the Edges to be lipped with 4MM Veneer which shall be Melamine Polished, Complete In All Respect As Per Drawing, Specification Approved By Architect/ Engineer In Charge.

Supply & Installation of Back Storage Unit, 18mm PLPB, Extruded Aluminium Profile, (2250x450x2200), Model-Evoke-4, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Wooden Storage, Particle Board Structure, (900x450x1200), Model-Storage11, Make-Geeken/Equivalent as Approved By Client/E.I

M/S IDEAS

Globalzone Sanitory Infrastructure Pvt. Ltd.