ADDN / ALTN / IMPROVEMENT IN TACDE BUILDING AT AF STN GWALIOR

Providing & fixing Wall panelling fully perforated 12 mm thick micro tagular edges or 10mm thick squre edged GRG wall panelling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 4x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

Providing & fixing false ceiling semi perforated 12 mm thick micro tagular edges GRG False ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 4x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

Dismantling of wall and ceiling boards (fibre ,pulp ,insulation etc ) or insulation boards /slabs/ blankets, any thickness, including wall paneling cover fillets or aluminium grid frame work complete all as specified and directed.

S&F 5mm thick solid PVC wall Paneling/lining any colour wood grains printed PVC pre laminated sheet, one side including beadings at top, bottom, corners of door and window jambs of matching colour inclusive of solvent cement and fixing at site over PVC frame complete all as specified and directed. Note: Colour, pattern and design as approved by GE & Quoted rates inclusive of removing all electric fittings and fixtures and refixing the same at its positions after finishing the panelling work and replace if any damaged while doing the work.

S&F PVC wall lining/Paneling consisting of 10 mm thick hollow section interlocking type fixed to wall any colour wood grains/ printed decorative PVC sheet, pre laminated inclusive of solvent cement and fixing with hidden screws and all necesary beadings at top, bottom, corner, Jambs, complete all as specified and directed by Engr-in-Charge Note: Quoted rates inclusive of removing all electric fittings and fixtures and refixing the same at its positions after finishing panelling work and replace if any damaged while doing the work.

M & L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( backing, screed/plaster) any number of layers), rubbish off the premises.

M&L for 10 mm thick double charged vitrified coloured ceramic tiles (square/ rectangular) as in flooring, area of each tile exc. 0.42 Sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles over 15mm th screed bed in CM 1:6 including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and all as specified and directed

All as per above here-in-before but as in skirting/dado but over 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with CM 1:2 to match the existing floors complete all as specified and directed.