Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.4 LAccepted-Finance 29 195 SANTI PARA JALPAIGURI | JALPAIGURI | JALPAIGURI | WEST BENGAL | 735101 | L1 | Accepted-Finance LOWEST | |
| 2 | L2₹10.4 L+₹1,699.50 (0.16%)Rejected-Finance 46 APC ROAD KOLKATA 700009 | KOLKATA | KOLKATA | WEST BENGAL | 700009 | L2 | Rejected-Finance GREATER THAN L1 | |
| 3 | L3₹10.7 L+₹28,499.51 (2.73%)Rejected-Finance 159 RAJA RAMMOHAN ROY ROAD E V PALLY P O RABINDRA SARANI SILIGURI | SILIGURI | ALIPURDUAR | WEST BENGAL | L3 | Rejected-Finance GREATER THAN L1 |
Tender Value
₹10.8 L
EMD Value
₹21,531
Closing Date
22 Jul 2024, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, NMD ,PHE Dte
OFFICE OF THE EXECUTIVE ENGINEER ,NORTHERN MECHANICAL DIVISION ,PHE Dte.SILIGURI SUKANTA SARANI, PARESH NAGAR, SILIGURI, PIN 734001
Renovation of Electrical Installation work of Ground Floor for Main Office Building, PHE Dte., Jalpaiguri Division at Club Road Near PD Womens College , Jalpaiguri.
2024_PHED_699907_5
WBPHED/EE/NMD/NIeT- 03 OF 2024-2025
Open Tender
ELECTRICAL WORKS M/R
Item Rate
30 days
Siliguri
Please refer Tender documents.
5 documents required · 5 mandatory
₹21,531
Yes
25 Oct 2024
27 Jun 2024
24 Jul 2024
27 Jun 2024
22 Jul 2024
27 Jun 2024
Amount
Main Power Connection
Supply & delivery of 1.1 KV Gr. XLPE/ PVC Armoured Aluminium Cable
4 core 50 sq. mm.
Laying of above mentioned cable on wall/surface incl. S & F MS saddles with earthing attachment in 2X10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting .
Laying of cable 3/3.5/4 core 35 sqmm to 50 sqmm
S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cable.
4 core 50 sq. mm.
Finishing the end of the XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & joiting materials.
4 core 50 sq. mm.
S&F medium gauge 65mm dia GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required as per GS.
Earthing Installation
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (For soft Soil: ISI-Medium GI pipe)
Excavation of soil for installation of Earth Electrode and filling & ramming. (Soft Soil)
S&F earth busbar of galvanized (Hot Dip) MS flat on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
S&F galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall
Connecting the equipments body to earth busbar including S&F galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.
i) S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat
Components of Power Distribution System
S&F double door 6-Way Vertical TPN MCB Distribution board for 160A MCCB incomer with IP-42/43 protection, on angle iron frame on wall and mending good the damaged to original finish incl. Inter connection with suitable size copper wire and neutral & provision for earthing attachment - as per direction of EIC)
Supplying and fixing double door sheet steel(16SWG),powder coated cable end box for 6 way TPN DB horizontal / vertical enclosure with IP-42/43 protection,on angle iron frame on wall&mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment .
S&F double-door (2+12) Way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall.(Legrand: (607712 )
Supplying and fixing of 6 way double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment ( Legrand 607716)
S&F 415 V L&T 100A 4- Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection .
Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. Legrand
63A FP MCB
40A DP MCB
Supply & fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.Legrand
i) 63A TP MCB
iii) 6-32A SP MCB
Distribution Wiring Installation
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.
i) 3 x 22/0.3 (1.5 sqmm)
ii) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC
iii)2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC
iv) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC
v) 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC
Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works .
25 mm dia 3 mm thick polythene pipe without earth continuity wire
a)Distribution wiring in 1.1KV grade 2x22/0.3 (1.5sqmm)single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only]and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular types witch (Brand approved by EIC) fixed on Modular GI switch board complete with2 no. suitable size “Ph&N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
Average run: 10 Mtr.
b)Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)
i) Average run: 8 Mtr.
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
On board
Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.
i)2.5sqmm
ii) 4 sqmm
iii)6 sqmm
iv) 10sqmm
v) 16 sqmm
Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.
Supply & Fixing 240 V AC/DC superior type Call Bell (Anchor) on HW board incl. S&F HW board .
Switch-Sockets & Enclosure with MCB
S&F 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
S&F 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
S&F 240 V, 3 nos. 6 A, 3 pin Modular type plug socket with 3 nos. 6A Modular type switch (Brand approved by EIC) with 1 no. 16 A, 3 pin Modular type plug socket with 1 no. 16A Modular type switch, 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 12 Module GI Modular type switch board with 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works
a) 2 Module
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment
Supplying and fixing 240/415 V 40 AMP DP Isolator on din rail of existing DBs and necessary connection.( Legrand Make )
Supply & Fixing of 9W LED Lamp. Havells or Equivalent of Philips or Crompton
Panel
Supply delivery installation testing & commissioning Indoor Cubical type L.T. Distribution panel board of appropriate size base mounted cmpartmentalized with maple arrangement having IP 54 Protection rigid & self supporting structure with cable allay fabricated from 3 mm thick CRCA sheet steel with 25X25X6mm MS angle frame and 75X40X40mmX4.4mm M.S. Channel for base support. And making masonary trench of 600mm depth and suitable length & wide in matching with Panel with 10" brick work, plastering & neet cementing as per direction of EIC. The panel board consisting of the following item-
500V, 400A electrolyte grade tinned copper BBC with vertical section for Neutral & Phases. Bus-bar shall be fixed with FRP insulator chair & the entire bars are insulated with PVC heat Sinkable sleeve of suitable size & color as per direction of E.I.C [equal bar for each i.e. 4-bar].
Incoming: 415V 250A SFU with DIN type HRC fuse - 01 no, DIN Fuse link 3nos, ASS 10 A, VSS 10 A,Power terminal 4 way , 415V 250A Changeover - 01 no.
BBC: 500V, 400A, 40X6mm electrolyte grade tinned copper BBC for Neutral & Phases.
Outgoing: 415V 100A SFU - 04 nos ,DIN type fuse link 100A- 12nos
Other equipments: 3-phase LED Volt Meter class-1 (0 -500 V AC) - 01 no. 3-phase LED Ammeter 5A, class-1 -01 no. 250/5A C.T. Coil ,15 VA -03 nos. LED Indicator ( R/Y/B 230V) with 3 nos. 6A SP MCB 03 nos, Power terminal 3 way Supply & Fixing 8"X6" Danger Board - 01 no.
S/F single wooden Board ( 10'x16') on wall necy. Nuts, Bolts, screws etc. as required incl. S/F 3 Nos. 500V, 250A cutout and 1 no. Neutral Bar on Porcelain insulator on hylam sheet for meter installation.
Make as per PHE approved vendor list
Add GST @18%
Add Labour Welfare Cess @ 1%
S P ENTERPRISE
BLUE PINE
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .