Repairing and Renovation of electrical wiring work at Director Technical Bungalow, MECL Nagpur 440 006

Amount

Point wiring for light-fan-bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories

Wiring for plug on board with Switch socket concealed type,copper wiring and earthing and with modular accessories

Point wiring for light-fan-bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories (for 2 Way Point)

Supplying & erecting mains with 3x2.5 Sq.mm F.R copper PVC insulated wire laid in provided conduit- trunking- inside pole-Bus bars or any other places

Supplying & erecting mains with 3x4 sq.mm FR copper PVC insulated wire laid in provided conduit-trunking- inside pole-Bus bars or any other places

Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit-trunking-inside pole-Bus bars or any other places

Supplying and erecting flat flexible 3 core 2.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying & erecting mains with 4x25 sq.mm F.R copper PVC insulated wire laid in provided conduit-trunking-inside pole-Bus bars or any other places

Supplying & erecting mains with 1x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places1x10 sq.mm wire

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm inside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete

Supplying & erecting HMS P.V.C. conduit 32 mm. dia. With necessary accessories in wall-floor with chiselling appropriately

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in wall-floor with chiselling appropriately

Supplying & erecting H.M.S. P.V.C. conduit 20 mm. dia. With necessary accessories in wall/floor with chiselling appropriately

Supplying and erecting UPVC reinforced flexible conduit 25mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar - POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar - POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar - POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar - POP as per required to match the background.

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 20A. 2 pin plug & earth socket and 20A. 3 pin plug top with 20A-30A single pole MCB complete erected on angle iron- GI frame.

Supplying and erecting ISI mark modular type switch 6A - 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type switch 16 - 20 A with indicator, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6 - 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type telephone socket two gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI make Modular type blanking plate one module duly erected on provided plate and box.

Supplying and erecting ISI mark modular type buzzer 220 /250V, duly erected on provided plate and box with wiring connections complete

Supplying and erecting LED square - circular 13 to 15W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying, installation, testing and commissioning of Decorative night lamp with provision of B-22 bulb holder

Supplying & erecting LED 20W tube light fitting (4 feet) with polycar bonate housing, heat sink, integrated HF electronic driver complete.

Supplying and erecting corridor-passage light fitting (2 feet) including 9W LED lamp, comprises of extruded channel in plastic silver grey colour & with same plastic end cap on provided PVC block - wooden board.

Supplying and erecting LED Bulb 15-18 W

Supplying and erecting 40W LED post top made in cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP65 protection on provided pole- bracket.

Supplying and erecting LED flood light fitting of 120W, including lamp, with PF > 0.95,class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete

Supplying and erecting LED street light fitting 12 to 18 W, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete

Supplying and erecting LED bulkhead fitting (including lamp) of 10 watt (min)

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor-power) in provided distribution board as per specification no. SW-SWR-MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface- flush mounted SPMCB of 12 ways-phase (36 poles) on iron- GI frame (horizontal bus-bar type)

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR-MCB

Supplying and erecting static energy meter with 3 X 240V 50 Hz. AC supply 10 to 60 A, ISI mark, accuracy class 1.0 with backlit LCD display, (measuring and display kWh only) with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested by electric supply company

Supplying and erecting bus bar chamber triple pole with neutral with four copper bars, 500V, 100A complete

Providing & erecting 4 Pole MCCB of 63 A, 415V capacity with short circuit rating 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame

Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 4 pole upto 100A MCCB complete. (Set of 8)

Supplying and erecting SS enclosure for MCCB suitable for upto 100A MCCB complete.

Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 300 mm. 900 RPM complete erected in position

Supplying and erecting exhaust fan with PVC body 230 V, A.C. 50 cycles, 10"(inches), complete erected in position

Supplying and erecting regular- standard model ceiling fan of 1400 mm. sweep complete erected in position

Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan

Supplying and erecting regular/ standard model ceiling fan of 600mm. sweep complete erected in position as per specification no. FG-FN/CF

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results

Supplying and erecting GI strip of required size used for earthing on wall and-or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required.

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials

Supplying and erecting GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.

Supplying and erecting street light Wall bracket made from 25 mm. dia ‗B‘ class G.I. pipe 1.2 m in total length

Supplying & erecting FRP watertight box of size 150 x 125 x 100 mm, 2.7 mm thick complete on pole-wall

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Painting of pipe pole upto 6 m length along with street light / pole brackets / clamps etc by scrapping the existing paint complete.

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

Supplying & erecting wooden board of size 4"x 7"

Dismantling the existing light, fan, bell, clock, independent plug point, TPNDB, wiring including circuit mains of all types along with accessories etc. complete

Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 400 mm

U S TECHNOLOGIES

M D ELECTRICAL

M S VISHAL CONTRACT WORKS