Detailed Design Supply Installation Testing Commissioning and Operation and Maintenance for 5 years of the Facade Illumination work of Ram Ghat Chitrakoot Uttar Pradesh

SITC of exterior rated Architectural RGBW Linear LED Wall Washer luminaire, suitable for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness and die casted end caps, Total System wattage 36W-40W with system humen output should be more than 1400 Im with all LEDs on. The Fixture beam angle should be 25/40/17x35/30x65 degree, Fixture beam should be Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol/Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 80 mm ± 5% including surface mount base width 59 mm ± 596, Min length 1000 mm ±5% with constant locking hinges for simple position control from various angles without special tools. DMX enabler circuit should be inside the Luminaire only. The rated voltage of the Luminaire should be 230Vac, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90-305VAC, PF> 0.90 and must have safety operation range form 90V-176Vac. Life time of LED driver should be > 80,000 hours and MTBF of LED driver should be≥2,00,000 hrs, Led driver must have SELV output and Case temperature ie. Te> 90°C. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. LED should be with ceramic paste of make Nichea, Osram, Cree, Lumiled only. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS ie. IS 15885 (Part 2/Sec- 13) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required Operation & maintenance of 5 Years

STTC of exterior rated Architectural LED RGB flood lighting luminaire; suitable for facade lighting with Die-cast aluminum housing, powder-coated finish, Clear toughened glass of 4mm thickness, Total System wattage not exceeding 28W-30W with system lumen output should be more than 1600 lm with all LEDs on Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol/Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 208 mm+1% including surface mount base and outer dia of 224 mm+1% with constant locking hinges for simple position control from various angles without special tools. Fixture shall be suitable to operate at an ambient temperature range of -30°C to 50°C and complete luminaire shall be IP66 and IK07 rated LED Life time shall be at least L70B50 @70000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only.. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage from 90-305 Vac, 50Hz with power factor> 0.9. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS Le IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including & weather proof connection cables, water proof connectors etc. as required, Operation maintenance of 5 years.

SITC of exterior rated LED RGB/RGBW Flexible LED Strip with 14.4 Watt per meter. LED Strip should have 60Nos LEDS per meter through out the length with the silicon cover with system lumen output should be more than 700 Ims/Meter. Standard Length of LED Strip is 5 Mtr and it shall be capable of producing dynamic colours changing light for with 16 million colours and should be programmable using 8 bit control DMX512 protocol/Ethernet based control. The Strip should have IP 67 protection with inbuilt IP67 connectors at both ends. DMX enabler circuit should be outside the Luminaire/LED Strip only. LED Strip shall be suitable to operate at an ambient temperature range of -20°C to 50°C. Life time shall be at least L70B50@35000 burning [hours at 50°C. LED should of make Nichea, Osram, Cree, Lumiled, Hongya of 5050 SMD package only. Pack of 5Mtr. The rated shall be offered with a BIS Approved Potted Driver of IP 66/67 rating voltage of the Luminaire should be 24VDC, Luminaire made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90- 305 Vac, PF> 0.95 and must have safety operation range form 90V-176Vac. Life time of LED driver should be> 80,000 hours and MTBF of LED driver should be≥2,00,000 hrs, Led driver must have SELV output and Case temperature i.e. Te>90°C. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS ie. IS 10322 (PART 5/SEC 7) and shall be complete with all necessary mounting accessories required for proper working of fixture including driver, decoder, aluminium profile with diffiser cover, weather proof connection cables, water proof connectors etc. as required , Operation & maintenance of 5 years,

SITC of DMX Controller for the system including all other accessories required for the running have Input Power 5-5.5V DC 0.6A and Output Protocol DMX512 with 4 universe, 2 universe should work in Stand Alone Mode and 2 universe should work in live mode with laptop/tablet/computer. The universe should be expandable from 2 to 4 DMX512 universes. It should be compatible for Programmability with PC, Mac, Tablet, Smartphone by using USB & Ethernet Dmxx controller should have network controllability feature to control the scene remotely through LAN and triggered via UDP packets on port 2430. Ils must have Connections Type C USB, XLR3, Ethernet, battery. There should be provision for Memory microSD card. Device should have Intuitive backlit keyboard with 10 presets and also have provision of kepad on device for changing scene muually from device Device should be capable to work on Extended triggering possibilities (TCA) & also have Smart Upgrade Technology (SUT). It is an IP 20 unit and has an Operating Temperature of 0°C to 50°C. weight should not be more than 120g OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10. Standards should be EC, EMC, ROHS. The controller should have a variety of features including 2048 DMX channels, clock/calendar, iPhone/iPad/Android remote control, Ethemet facilities, dry contact port triggering and multi-zone SD card memory. Network synchronization of one area across hundreds of universes with the possibility of 99 scenes across 5 areas with auto clock triggering for sunrise and sunset and as per the festivals for specific occasions. Device should be equipped with meta; clamp to mount on wall All Dynamic LED lighting fixtures & controllers shall be of same make to avoid integration, synchronization, and maintenance issues in future. To be provided with IP 66 enclosure if installed in external environment. Operation & maintenance of 5 years

Planning, Designing, Programming of all the light fixtures with integration into controller and making multiple programming in total of 5 different occasion. Synchronizing all fixtures into one.

Supply of DMX Signal Amplifier to boost the Signal, IP 65 rated module to enhance the depleting DMX Signals, should have IP 66/67 rates inbuilt connectors compatible with Lamminaires. It should be offered with inbuilt electronic circuit for functioning. No external LED driver needed

ELECTRICAL ITEMS

Supply, Installation, Testing and Commissioning ofDMX Addressing required for programming, addressing of the fixtures.

3x 2.5 sqmm Cu unarmored multistrand

4x 16 sqmm Al armoured

Data cable Cat 6

Connecting Cable for data transmission from DMX to LED Fixture Lenier only

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc.

4 sqmmm

Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.L. strip, G.L clamps on surface complete in all respects

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer Gl pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity

Cable Entry Junction Boxes IP66 HENSEL cat Ref DK0606

IP-67/68 Junction Box for Fixture connection

Synthetic Glands with Lock Nut Cat ref 1545.25.17+8220.40

Supply, installation, testing and commissioning of cages for protection of light fixtures of suitable size made of stainless steel 304 grade having wire mesh with spacing of 1.5-2 inches and sturdy to avoid ohysical damage with base frame being made of 4 mm thick strip

Supply, installation, testing and commissioning of PVC Pipe of size 20 mm as per requirement for cable layingand its protection.

Suitable DC Driver for IP-67 LED Strip

Supply, installation,testing and commissioning of PVC Pipe of size 40 mm mm as per requirement for cable layingand its protection

Supply,installation, testing and commissioning of Electrical panel with Servo Bypass swith on incomer having 63 A MCCB with Surge Protection Device for all phases with minimum 6 No outgoing of 6 A DP MCCB A compartment having two switches for safekeeping the controller and other necessary equipments

Supply, installation, testing and commissioning of Oil Cooled Servo Stabilizer of 15 KW Three Phase with Enclosure and connection to the main panel with rating of 180-250 V stabilizong and maintaining a fixed voltage output of 220Volt for the entire system

SURYA ROSHNI LTD

M M Brothers