Repairs to hardstanding, interlocking tiles, chequered tiles, compound wall, plastering, painting and fencing under the AoR of AGE SLDC E/S area under AGE (I) (U) B/R, Delhi Cantt-10

Amount

Dismantaling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground concrete brick work masonry etc complete all as specified and directed

Excavation in post holes n.exc 0.5 cum each getting out and removing surplus soil to a distance n.exc 50 m and making good surfaces in soft/loose soil complete allas specified and as directed.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded aggregate as in foundations, fillings and mass concrete complete all as specified and as directed.

MS work as in posts and struss, fencing, fillets, plates etc including cutting tops to shape as directed,drilling holes, notching for wire etc including all necessary drilling, bolting or ribeting etc complete confirming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

M&L for preparation of steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome complete all as specified and as directed.

Dismantling fencing wire mesh any type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standerds, rails, straining bolts etc including provision of binding wire complete all as specified and as directed.

Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed.

M&L as in repair galavanised 2 stand steel barbed wire 2.24mm dia barbed with 2mm dia at barbs 75mm spaceing and strainings and fixed to any type of standard rails staning bolts including securing or tying at crossing with provision of GI mid steel pins etc (each line line wire to be measured) complete all as specified and directed..

M&L for mild steel screw bolts (machine made) 5.00mm to 10.00mm diameter of neck and length of bolt exc 5.0 cm and n.exc 10cm with hexagonal or square heads at one end and screwed the other end, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified.

M&L for Removing excavated material/deberis out of MD land ans depositing where directed at a level complete all as specified and as directed.

M&L for 20 mm thick grenite ( of any type ) work (table rounded and polished) in coloumn, jambs, brick pillars, over 15mm thick rendering in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixer of pigment to match with shade of granite complete all as specified and directed.

M&L for framed work such as gate(any size), grills,gratings,etc with ends of bars shouldered and/or riveted,or forged into spikes framed guard bars barred iron doors ladders framed balusters,walk ways,railing,framework of water tank and similar work con-forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for applying two coats of weather proof exterior emulsion paint over priming coat of exterior primer on new or untreated plastered surfaces using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure

Dismantaling of brick masonry work built in cement mortar or cement lime mortar complete all as specified and directed by Engr-in-Chrage.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class except "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish

S&F of concentrina coil fencing wirth punched tape concertina coil 600 mm dia 10 mtr openable length having 50 Nos rounds per 6 mtr length , spring core wire ( 2.5mm thick) of high tensile strength of 165 Kg/Sqmm with tape (0.52 mm thick and weight 43.478 gm/metre and fixing the same with existing Y shape Angle iron with 6 horizontal R.B.T ( Reinforced Barbed Tape) wire, stud tied with GI Staple sand GI clips to retain horizontal including dismantaling all complete as per direction of Engineer-in-Charge

M&L for PCC (1:2:4) type B-1 (20mm graded aggregate) as in kerbs/coping and the like including weathering, slightly rounded or chamfered angles and throating, including formwork complete all as specified and directed

Dismantaling stone slabs or tiles of any description or thickness in floor complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2 1:4:8 ( 40mm graded aggregate) as in sub base for interlocking all as specified.

M&L for machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade fixed with grey cement and no pigment including 30 mm thick sand filling under floors, watering and consolidation complete all as specified and directed by Engr-in-Charge.

- ditto - all as per item No. 26 but except tiles.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors laid over 15mm thick screed in CM 1:6, including dismantlig complete all as specified and direrected.

M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) finished even & smooth without using extra cement as directed complete all as specified and directed.

Dismantaling kerb stone for any descripition and any size complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortat 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage open whereever required complete all as specified and as directed

Dismantling plain or corrugated steel sheeting/AC/ Fibre reinforced, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F of pre-painted gaivatume aluminium sheet zinc coatin GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F of pre-painted gaivatume aluminium sheet zinc coatin GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

A S CONSTRUCTION CO. (BID ID -3102289)

M/S GEETANJALI ENTERPRISES (BID ID -3106132)

B.R. Enterprises (BID ID -3108595)

D K Engineers and contractors (BID ID -3109199)

friends associeates (BID ID -3107280)

B. S BUILDERS (BID ID -3106806)

HIRA SINGH AND SONS (BID ID -3107096)

SURESH KUMAR SHARMA & CO (BID ID -3107179)