Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC 1000 PUDA MODEL TOWN PHASE 5 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹42.0 L+₹4.4 L (11.8%)Rejected-Finance 01 ENTERPRISES | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹44.1 L+₹6.5 L (17.4%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹44.7 L+₹7.2 L (19.1%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹45.3 L+₹7.8 L (20.7%)Rejected-Finance H NO 18 SHEET NO 5 A KATIA COLONY NAMDEV MARG BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L5 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
20 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHISIANA
GE (AF) BHISIANA PIN - 151201
REPAIR OF JOINERY ROLLING SHUTTERS AND OTHER B/R REPAIR WORKS INCLUDING TANK CLEANING IN DOMESTIC AREA AT AF STN BHISIANA
2024_MES_661886_1
GE/BHI/T-09/2024-25
Open Tender
Civil Works
Item Rate
273 days
GE (AF) BHISIANA
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE (AF) BHISIANA
₹70,000
Yes
2 Sept 2024
25 Jun 2024
22 Jul 2024
25 Jun 2024
20 Jul 2024
11 Jul 2024
25 Jun 2024 - 6 Jul 2024
Amount
Demolition of Brickwork or stone/ boulder masonary, built in cement mortar or cement lime mortar, complete all as specified and directed by Engineer in Charge.
Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6 m mean radius , buit in cement mortar (1:6), complete all as specified and directed by Engineer in Charge.
Material and labour for brick work with subclass B bricks, straight or curved on plan to anyb radius in half brick thick wall, buit in cement mortar (1:4), complete all as specified and directed by Engineer in Charge.
Taking down cement or cement lime plaster of any description and any thickness on brick ,concrete or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer in Charge.
Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc, including water Proofing Compound complete all as directed by Engineer in Charge.
M&L for rendering 10 mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and fair etc, complete all as specified and directed by Engineer in Charge.
Material and labour for preparation of new plastered surfaces and applying two coats of cement base paint and one coat of primer on walls, pillars cornices complete all as specified and as directed.
Supply only Integeral Water Proofing Compound, complete all as specified and directed by Engineer in Charge.
Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor with and including clamps, nut bolts including dismantling of old AC rain water pipe etc, complete all as directed by Engineer in Charge.
Supply and fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.
M&L for Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper acrylic/distemper oil emulsion acrylic, white or tinted over a coat of primer of same make, complete all as specified and directed by Engineer in Charge.
Dismantling of boarding in any position and in any description fixed with nail , complete all as specified and directed by Engineer in Charge.
S&F of 18 mm thick PVC ply of Plain color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications complete all as specified and directed by Engineer in Charge.
S&F of 18 mm thick PVC ply of one side Prelam/Rigidlam and other side balancing laminate colour to make kitchen cabinet Shutter/ drawer Front shutters complete as per specifications complete all as specified and directed by Engineer in Charge.
S&F of 5 mm thick PVC ply of plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet back covering and pull out drawer base complete as per specifications complete all as specified and directed by Engineer in Charge.
S&F for 20mm wide & 1mm thick PVC EDGE BEDDING of PVC pested on edges with suitable adhesive, complete all as specified and directed by Engineer in Charge.
S&F of Ball bearing runners 45 mm Telescopic Channel ( 20 Inch ) full extension load capacity 50 kgs, complete all as specified and directed by Engineer in Charge.
S&F of stainless steel handles 100 mm size for kitchen cabinet shutters, complete all as specified and directed by Engineer in Charge.
M&L Continous piano hinges stainless steel ,bright finish width of flaps when open 40 mm complete all as specified and directed by Engr-in-charge.
S&F Hasp and staple safety type aluminium powder coated with mild steel pin inculding bolt to hinge plate and fix with screws 150 mm size of hasps and staples, complete all as specified and directed by Engineer in Charge.
S&F Magnetic catcher for cupboards complete as all specified and directed by Engineer in Charge complete all as specified and directed by Engineer in Charge.
S&F in repair MS powder coated Curtain Rods 18 to20 mm bore over doors and windows , with fixing MS powder coated brackets,including screws,rawal plug ,and PVC powder coated fineals / fency type with end doms at each end of curtains rod, of any colour etc complete all as specified and directed by Engineer in Charge.
Taking down Chowkhats or door frames/ steel windows/ventilators, not exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer in Charge.
Taking down shutter of area exc 1 sqm but n exc 2 sqm each complete all as specified and directed by Engineer in Charge.
Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing, complete all as specified and directed by Engineer in Charge.
Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed by Engineer in Charge.
S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed by Engineer in Charge.
S&F 125 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer in Charge.
S&F 100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer in Charge.
S & F steel window/ventilator of box section having 1.25 mm thick CRC sheet frame with double shutter inside gauged shutter and outside glazed shutter with one nos steel handle in each shutter,one nos peg stay in each shutter ,complete with glazing bars and 08 Nos of 10 x 10 mm square guard bars in equal spacing, devoited or welded as per sample incl one coat of red oxide primer all as specified and directed.( The rates includes 4 mm thick plain sheet glass and galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and 2 coat of synthetic enamel paint over a coat of zinc chrome primer) Note : The design of window to be facilitated by cooler fixing provision where ever reqd) ,complete all as specified and directed by Engineer in Charge.
Taking down chowkats & shutters without taking off shutters from the frame, size of opening exc. 1.50 sqm but not exc 4 sqm each. complete all as specified and directed by Engineer in Charge.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer in Charge.. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineer in Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately.
Providing and fixing factory made PVC Prelam wire mesh solid door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15mm x 15mm for top, lock & bottom rail. M.S. frame shall have a coat of metal primer of approved make and manufacturer. 19mm x 19mm M.S. square tube shall be covered with heat moulded prelam sheet 'C' channel made from 5mm (+ 0.25) thick PVC sheet of Density 600 kg/Cbm Manufactured by an ISO-9001-2015 certified company, of size 30mm thickness, 115mm width out of which 100mm shall be flat and 15mm shall be bent in 90 degree angle on either side forming stiles, one of the 90 degree bend edge is cut from stiles as well as rails to nails from inner side of door to hide wiremesh fixing steel screws. 5mm (+25) thick 140mm wide PVC sheet out of which 125 mm shall be flat and 15mm shall be 90 degree on the inner side to form top and bottom rail and 155mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be bent in 90 degree on both side to form lock rail. An additional 5mm (+25) thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive. Panel will be of GI/SS wire mesh of 24 gauge to be fitted inside area of stiles & rails. The wire mesh in top, bottom & lock rail is sealed with 15mm x 15mm tube with steel screw of size 13/6mm, 10mm (5mm x 2 nos) thick PVC strip of 25 mm width is to be stuck & nails on both side of G.I wire mesh interior at the top, bottom & lock rail. 10mm thick (5mm x 2nos) thick, 20mm wide cross PVC sheet as gap insert for top & bottom rail Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mmx25mmx2mm and 32mm long steel screw drilled suitable to pass through both the walls of the M.S. tube Other hardwares should be fixed with 19x6mm size steel screw etc. complete as per direction of Engr-in-Charge.
Supply and fixing, Factory made, 35mm thick plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces using 2nd class HW as in rail and style. The size of rail and style as per IS-1003 (part – I), kiln seasoned and chemically pressure treated, complete all as specified and directed by Engineer in Charge.
Supply and fixed 35mm thick glazed and skelton shutter IInd class hard wood ,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of member of shutters as specified in SSR part-1 , section 8 , clause 8.24(a) , complete all as specified and directed by Engineer in Charge.
M&L applying Two coats of Synthetic enamel paint over a coat of pink primer including prepration of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed by Engineer in Charge.
Taking down shutter of any description exc 1.00 sqm but not exc 2.0 sqm each and refixing in same opening after easing and adjusting (Chowkat/frame changed) etc, complete all as specified and directed by Engineer in Charge.
S&F 150 stainless steel barrel tower bolts of extruded section complete all as specified and directed by Engineer in Charge.
S&F 300 mm stainless steel sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded section, complete all as specified and directed by Engineer in Charge.
S&F 150 mm stainless steel handles of any type complete all as specified and directed by Engineer in Charge.
S&F floor door stopper of size 140 mm of aluminium ally body and tongue, anodised, with hard drawn steel spring ficed in floors, complete all as specified and directed by Engineer in Charge.
S&F in repair mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed by Engineer in Charge.
S&F in repair of Aluminium body door cill upto 1mtr length at bottom part of door to stop entry of insect inside the room complete all as specified and directed by Engineer in Charge.
S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staple complete all as specified and directed by Engineer in Charge.
S&F in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staple complete all as specified and directed by Engineer in Charge.
S&F Powder coated Anodised aluminium frame for doors, windows, ventilators, partations with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer in Charge.
S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, mortice locks anodised aluminum snap beading screws etc. complete all as specified and directed by Engineer in Charge.
S&F Powder coated Anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer in Charge.
S&F Powder coated aluminium decorative grill of size of mesh 50mm x 50mm fixed with doors, window for safety of glass etc. complete all as specified and directed by Engineer in Charge.
S & F sheet glass 5.5 mm thick ordinary quality and glazing with oil putty/ any type of beading in square/rectangular in each pane complete all as specified and directed by Engineer in Charge.
S&F 12mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed by Engineer in Charge.
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer in Charge.
S&F Aluminium (Die Cast body) Door closer hydraulically regulated designation No 1 universal type suitable for door shutters up to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engineer in Charge.
S&F in repair Brass Mortice lock, four levers vertical type, size 75/100 mm complete all as specified and directed by Engineer in Charge.
Taking down top hood cover from existing rolling shutters greasing, over oiling of all the components for easy operation realignment of guide channel bearing and tension spring, making good locking arrangement including cleaning etc Area Up to 15 Sqm of each shutter complete all as specified and directed by Engineer in Charge.
Taking down rolling shutter of any description (With all components) and in any size and removing from site area upto 15.00 Sqm each, complete all as specified and directed by Engineer in Charge.
S&F Steel rolling shutters of 1mm laths thickness, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed by Engineer in Charge.
S&F in repair Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engineer in Charge.
S&F in repairs Drizzle colour fully transparent high grade ABS corner shelve of size of 27x27x36 cm fixing with free screw and wall plug complete all as specified and directed by Engineer in Charge.
Suply and Fixing coat hooks of six pegs made out of stainless steel 45 cm long (as per sample) , complete all as specified and directed by Engineer in Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer in Charge.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer in Charge.
S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, as in cooler stand etc. (cut to ordinary lengths i.e. within 20mm of the length indicated in Fe 410 -W (GdeE- 250) quality A complete all as specified and directed by Engineer in Charge.
Material and labour for preparation of new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer exposed to view surfaces, complete all as specified and directed by Engineer in Charge.
Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete all as specified and directed by Engineer in Charge.
S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed by Engineer in Charge.
S&F figured glass 4mm thick, pin head type and glazing with oil putty in square not exc. 0.5 Sqm in each pane complete all as specified and directed by Engineer in Charge.
Disconnecting existing tanks Exc 250 Ltr and not exc 500 Ltr, setting aside (for lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re fixing in position after and including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc, complete all as directed by Engineer in Charge.
Disconnecting existing tanks Exc 500 Ltr and not exc 1000 Ltr, setting aside (for lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re fixing in position after and including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc, complete all as directed by Engineer in Charge.
Cleaning of RCC water tanks Exc 250 Ltr and not exc 500 Ltr, disconnecting etc and hoisting if required reconnecting and re fixing in position after and including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed.
Material and labour for writing letters or figures (Block,Roman,Italic or Indian)as TANK CLEANED ON : DD/MM/YEAR) n exc 15 cm high with Synthetic enamel paint of any colour on any type of Overhead water tanks all as specified and directed.
Dismantling water tanks Exc 250 Ltr and n exc 500 Ltr and removing to store, complete all as directed by Engineer in Charge.
Dismantling water tanks Exc 500 Ltr and n exc 1000 Ltr and removing to store, complete all as directed by Engineer in Charge.
M&L for Rotational moulded polyethylene water storage tanks Triple Layer White/ Black Colour 500ltr Capacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as directed by Engineer in Charge.
M&L for Rotational moulded polyethylene polypuf water storage tanks Triple Layer White/ Black Colour 1000 ltr Capacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, , complete all as directed by Engineer in Charge.
S&F in repairs 20mm Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as directed by Engineer in Charge.
S&F in repairs 15mm Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as directed by Engineer in Charge.
Fixing only 15mm Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as directed by Engineer in Charge.
S&F in repairs Plastic Covers of any type (threaded or hinge and locking system)For rotational moulded polyethylene water storage tanks 500ltr Capacity, complete all as directed by Engineer in Charge.
S&F in repairs Plastic Covers of any type (threaded or hinge and locking system)For rotational moulded polyethylene water storage tanks 1000ltr Capacity, complete all as directed by Engineer in Charge.
M&L Cement Concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) in Slope, Padding, Roof Kerbs or Mud Stops, rounded or Chamfered on edges, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed by Engineer in Charge.
S&F in repair 25 mm dia GI tank nipple from existing water storage tank of any capacity, complete all as directed by Engineer in Charge.
S&F in repair 20 mm dia GI tank nipple from existing water storage tank of any capacity, complete all as directed by Engineer in Charge.
S&F in repair 15 mm dia GI tank nipple from existing water storage tank of any capacity, complete all as directed by Engineer in Charge.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store including earth work where required, complete all as directed by Engineer in Charge.
Refixing 15 mm bore old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) including earth work where required, complete all as directed by Engineer in Charge.
Material and labour 15 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including earth work where required complete all as directed by Engineer in Charge.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store, including earth work where required complete all as directed by Engineer in Charge.
Refixing 20 mm bore old steel tubing and connections in new or old position (walls, ceiling, floors, etc.), including earth work where required complete all as directed by Engineer in Charge.
Material and labour 20 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including earth work where required complete all as directed by Engineer in Charge.
Singla Enterprises
STELLAR PROJECTS
GUPTA AND ENGINEERS
V K CONTRACTOR
M/s Luxmi Constructions
REYANSH GARG AND COMPANY
M/s Manav Builders
Rasvinderpalandco
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .