Chain link Fencing work at Tirith community plantation area area of Nubra Forest Range for the year 2022-23 under Community plantation scheme

Amount

Earth work in excavation over area exceeding 30cm in depth as well as 10sqm on plane including disposal of excavated earth and lift up to 1.5 m disposal of earth to be leveled and neatly dressed. 80×0.45cmx.0.45cm×0.45cm= 7.29cum

Providing and laying in position cement concrete of specified grade including of centering and shuttering all work up to plinth level 1:3:6 (1 cement 3 fine sand 6 graded stone agg. 20mm nominal size) 1. crushed 80×0.45cmx.0.45cm×0.45cm= 7.29cum Including cost of material and carriage job.

Providing and fixing of fabricated angle iron fence post made of standard angle section 2.14 mtrs long with 15cm foot /toe at bottom with holes drilled and top bend (50mmx50mmx6mm)80 (Including cost of material and carriage complete job)

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns 20x4x0.45m=36.00sqm (Including cost of material and carriage complete job.)

Providing and fixing of G.I chain link fabric fencing cold dip galvanized of required width in mesh size 100x100mm including strengthening /binding with 2mmdia G.I wire or nut bolts and washer as required complete as per the direction of the in charge 245mtrs x1.52mtrs height (768kgs) Including Cost of material and Carriage complete job.

Supply at site angle iron posts and strand of required size including bottom to be split and bend at triangle in opposition direction of 10cm length and drill hook upto 10mm dia etc of all complete job. Flat 40mmx6mm 1x80x 5’.0”= 400.00rfts or 121.95 RM @ 1.87kg/m=228.04kgs .(Including Cost of material and Carriage complete job)

Steel work in built up tubular round square or rectangular including cutting, hoisting , fixing in position and applying of one priming coat of approved steel primer including welding and bolting with special shaped washers etc including Hot finished welded type tubes. 4” dia NB medium. Entrance gate = 5.6x12’.00”= 66.00rfts or 20.12RM @12.2kg/m= 245.46kgs @Rs 110/kg (including cost of material and carriage complete job.)

Providing ad fixing of mild steel door bolts with holding ad complete job.(including cost of material and carriage complete job.)

Cost and installation of one sign board with sizing (6’.00”x4’.00”) With 4’.00” leg including writing etc.(including cost of material and carriage complete job.)

M/S TASHI WANGAIL

M/S REGZIN CHOSPHEL GOVT CONTRACTOR