SPECIAL REPAIR TO BUILDING NO P-51/01 TO 08 (ORS MARRIED ACCN) AT SUNDERBANI UNDER GE (NORTH) AKHNOOR

Amount

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove incl brushing neat cement slurry with 3.00kg of cement per sqm, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises, complete all as specified and directed.

Demolition of cement concrete any description and in any postion not otherwise, complete all as specified and directed.

Taking down cement plaster on brick or stone wall, including racking out joints, hacking for key scrubbing down with water etc, complete all as specified and directed.

Taking down shutter of any description area exceeding 1 Sqm & not exc 2 Sqm and removing from site, complete all as specified and directed.

Taking down chowkhats with shutters ( without taking off shutters from the frames) n.exc 1.50 Sqm each and removing to or from store, complete all as specified and directed.

Taking down chowkhats with shutters( without taking off shutters from the frames) exc 1.50 Sqm but not exc 4.0 Sqm each and removing to or from store, complete all as specified and directed.

2nd class hard wooden 35 mm thick plain framed panelled shutter with lock rail and panel of 12 mm veneered particle board with commercial vennearing on both faces.The size and rail as per IS 1003 (Pt-I) Kiln seasoned and chemical pressure treated, complete all as specified and directed.

Glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass gauge etc with plain chamfered or rounded, mitered or rebated sash bars edges of plain chamfered or rounded fitted to cut mitered beads for securing glass etc fitted to chowkhat of second class hard wood, complete all as specified in clause 8.20(a) of SSR Pt-I.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings, complete all as specified and directed.

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

All as per Srl item No 12 here in before but without glazing bars, complete all as specified and directed.

Steel ventilators with top hung shutters including projecting type hinges with steel handle, and steel peg stay, complete all as specified and directed.

S&F Mild steel framed work such as guard bars, grills, gratings etc, with ends of bars shouldered and / or riveted or forced in spikes and similar works conforming to Fe-410-0 or 310-0, complete all as specified and directed.

S&F Glazing with sheet, 3mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F Mild steel butt hinges, medium weight, cold rolled and fixed of 100 mm, complete all as specified and directed.

All as per Srl item No 18 above but 50 mm size, complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodized, of 150 mm, complete all as specified and directed.

S&F Aluminium anodized barrel tower bolt of extruded section and fixed of 150 mm length of bolt, complete all as specified and directed.

All as per Srl item No 21 above but 125 mm size, complete all as specified and directed.

S&F Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) 300 mm long, and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed.

S&F 300mm ordinary mild steel rat tail rod pattern springs incl roller & roller plate, complete all as specified and directed.

S&F Floor doors stoppers of aluminium alloy body and tengue anodisede with hard drawn steel spring fixed in floor 150mm long, complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparing new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Preparing surfaces of old painted steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with one coats of synthetic enamel paint, complete all as specified and directed.

M & L cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick , in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays, complete all as specified and directed.

M&L for old concrete surface/floor by picking, weeping clean and washing with down with water to remove dust etc, complete all as specified and directed.

M&L for brushing cleaned surface with neat cement slurry with 3.0Kg of cement per sqm, complete all as specified and directed.

M&L 50 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof padding in slop, finished surface even and smooth without using extra cement, complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm incl cleaning surfaces, complete all as specified and directed.

M&L for fixing APP based polymeric membrane minimum weighing 3kg/sqm and min 3mm thick reinfirced with polyster noin wove faric (wt not less than 150gms/sqm) land on primed surface by forced application, complete all as specified and directed.

M&L non skid ceramic tiles 7 to 8 mm thick(square/ rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, coloured as in floors 15mm thick screed bed or bedding layer of cement mortar(1:4) for laying floor finishes etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed.

M&L Glazed ceramic tiles coloured (300 x 200 x 7mm) thick for works on vertical surfaces on 10mm rendering surfacec Cement mortar 1:4 such as skirting/dados etc. set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed.

Rendering 15mm thick on fair faces of brick/concrete surfaces or in CM 1:4 finished even & smooth without using extra cement, complete all as specified and directed.

Rendering 15mm thick on other than fair faces of brick/concrete or stone masonary surfaces in CM 1:6 finished even & smooth without using extra cement, complete all as specified and directed.

M&L rendering 5 mm thick in cement mortar 1:3 finished even and smooth without using extra cement on concrete surfaces, complete all as specified and directed.

M&L for preparing new surfaces of walls and applying two coats of distemper oil emulsiont over a coat of chalk whitening, complete all as specified and directed.

M&L for preparing new surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

M&L Preparing of old plastered surface of ceiling and applying one coat of white wash on ceiling, complete all as specified and directed.

All as per Srl item No 42 above but three coats on new plastered surface of ceiling, complete all as specified and directed.

M&L for preparing old surfaces of walls incl washing rubbing down and stopping of distempered and applying one coats of distemper oil emulsion, complete all as specified and directed.

M&L for preparing old surfaces of walls and applying one coat of cement base paint, complete all as specified and directed.

S&F Cast iron nahani trap of 75mm dia of outlet with grating incl jointing to waste pipe fixed in cement concrete 1:2:4 type B-1, complete all as specified and directed.

S&F in repair WHB vitreous china white 550mmx400 mm (flat back or angle back type) including cutting for and pinning in end of the new brackets with 32 mm bore CP waste coupling fixed in repair, complete all as specified and directed.

S&F in repair vitreous china sqatting pan orissa pattern size 580x440mm white with integral footrest including lime concrete bedding fixed as in repair, complete all as specified and directed.

S&F in repair PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve flaot and handle including brackets, 10 ltr capacity, complete all as specified and directed.

S&F in repair PVC connection 15mm bore size with PTMT nuts of length 45cm, complete all as specified and directed.

S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repair 32 mm dia PVC waste pipe 90 cm long fexible type for Wash basin, complete all as specified and directed.

Taking up or down steel water tubing and connections of 15 mm bore, complete all as specified and directed.

All as per Srl item No 54 but 20 mm bore, complete all as specified and directed.

Fixing only tubes any grade 15mm bore to walls and ceiling or in floors etc including provision of new fittings as required (Serviceable galvanised tubes retrieved from respective items shall be laid under these items), complete all as specified and directed.

All as per Srl Item No. 56 here in before but for 20mm bore, complete all as specified and directed.

S&F Mild steel galvanized steel tubing with screwed socket joints, medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors including , screwing and waste and for forged bends on piping as required , cutting through walls, floors and their making good to match with the existing specifications of 15 mm bore, complete all as specified and directed.

All as per Srl Item No. 58 but 20 mm bore, complete all as specified and directed.

S&F concealed stop valves cast copper alloy serwed down high pressure , 15 dia bore, but fancy type, chrominium plated fixed in repairs, complete all as specified and directed.

S&F stop valves cast copper alloy serwed down high pressure, 15 dia bore, but fancy type, chrominium plated fixed in repairs, complete all as specified and directed.

S&Fstop valves cast copper alloy screwed down high pressure with crutch or butterfly handle 20mm dia bore fixed in repairs, complete all as specified and directed.

S&F Bib taps, cast copper alloy,CP with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm bore of pipe brass ferrule fixed in repair, complete all as specified and directed.

S&F Pillar tap cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure 15mm dia bore fixed in repair, complete all as specified and directed.

S&F in replacement; steel chromium plated round grating 100mm dia, fixed in position in cement mortar (1:3) , complete all as specified and directed.

Dismantling water tanks exc 250 ltr but n.exc 500 ltrs capacity and removing to store, complete all as specified and directed.

Rotational moulded HDPE water storage tanks (Cylindrical vertical closed top), double wall construction,hoisted and fixed in position or placed in position inside or outside the bldg connecting up pipes and security access covers complete 500 ltrs, complete all as specified and directed.

Ball valve high pressure of PTMT withepoxy coated Aluminum rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed in repair 25mm bore, complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm, complete all as specified and directed.

M&L for Granite (of any type) as on kitchen plateform tiles 20mm thick machine cut, bedded andjointed with grey cement slurryand pointed with white cementwith admixture of pigment tomatch the shade of granite stoneincluding grinding and polishing, complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for RCC, 1:2:4, type B-1 (using 20mm graded aggregate) in slab supproted on walls, beam and columns in floor, roof etc, complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs etc, complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass-concrete Type C2, 1:3:6 (using 40 mm graded stone aggregate), complete all as specified and directed.

M&L Sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed.

Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment, complete all as specified and directed.

PCC 1:2:4 type B-1(using 20mm graded stone agg) as in benching & coping incl necessary formwork, complete all as specified and directed.

Dismantling boarding, any position, fixed in any position, complete all as specified and directed.

M&L for 25 mm Prelaminated particle board for writing board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with 100 mm size but hinges (02 Nos in each board) to frame work, complete all as specified and directed.

M&L for 2nd class softwood plain fillets, square, rectangular, not exc 3 sq cm in sectional area, cleaned sawn, secured with nails or brads, complete all as specified and directed.

M&L for 2nd class hardwood plain fillets, square, rectangular, exc 13 sq cm & not exc 25 sq cm in sectional area, cleaned sawn, secured with but hinges, complete all as specified and directed.

S&F harison curtain rod, mild steel chromium plated & fixed with brackets, complete all as specified and directed.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable with XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 10 Sqmm x 2core, complete all as specified and directed.

Sand cushioning to under ground cable in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable, complete all as specified and directed.

Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat, complete all as specified and directed.

Steel tubing galvanized (light grade) 32 mm bore conforming to IS-1239 for passing cable under road/floor or fixing to poles for protection of under ground cable complete with Flat iron 50x6mm clampsmade to shape and 12mm dia bolts, nuts and washers for fixing where required, complete all as specified and directed.

Taking out old unserviceable service connection or cable, complete all as specified and directed.

Mild Steel galvanised steel tubing 20 mm dia bore with screwed socket joints medium grade together with all fitting (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to and ceiling with clips, wall hooks,wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required , cuutting through walls, floors and their making good to match with the existing specifications for 20 mm bore of pipe, complete all as specified and directed.

Gate Valve of Gun Metal with iron wheel head screwed on both sides for iron pipes of 20 mminternal dia including dismentling and taking out old unserviceable gate valve from the existing pipeline etc., complete all as specified and directed.

Cutting of existing pipe line, insertion of suitable size Tee complete for taking branch connection, complete all as specified and directed.

Excavation in trenches n.exc 1.5m in width and n.exc 1.5m in depth and getting out in any type of soil, complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layer n.exc 25 cms thick in any type of soil, complete all as specified and directed.

Removal excavated surplus soil to a distance n.exc 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light fan socket or power) complete including fittings such as switches, ceiling rose, pendent, regulators, socket etc and making good disturbed surfaces of wall floors etc including removing the material from the site, complete all as specified and as directed.

Taking down carefully by carefully unscrewing unserviceable DBs,SPN 8 way 415 volt complete with bus bar and rails for easy mounting of MCBs complete with from boards and disconnecting from incoming and outgoing, complete all as specified and as directed.

(a) Material and labour for point wiring for one light point or fan point or bell point with multi stranded copper conductor PVC insulated cable in PVC casing and capping 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including mild steel terminal Boxes of suitable size for mounting switches sockets etc with 3 mm thick laminated sheet cover for one light point or one fan point or one bell point, complete all as specified and as directed.

(b) All as per Srl item No. 96 above but One light point controlled by 2 way switch, complete all as specified and as directed.

(c) All as per Srl item No. 96 above but One 3 pin socket outlet 5 Amp on independent board, complete all as specified and as directed.

(d) All as per Srl item No. 96 above but One 3 pin socket outlet 5 Amp on same board, complete all as specified and as directed.

(e) All as per the description of item No 96 here in before but with 2.5 Sqmm multistrand copper cable PVC insulated for one three pin socket outlet, 15 Amps on independent board, complete all as specified and as directed.

Switch piano, flush button 5 Amps, single pole one way, complete all as specified and as directed.

Bell push, flush type, 5 Amp, complete all as specified and as directed.

Lamp holder,insulated body, with back plate for batten fitting, complete all as specified and as directed.

Musical Door Bell, AC 230 volt single phase, complete all as specified and as directed.

S & F energy saving LED lamps 7 watt, 230 volts, 50 HZ, 0.95 PF, complete all as specified and as directed. Make- Havell Cat part No LHLDERHEMD8X007 or equivalent

M & L complete for Energy saving new generation 10W LED IP65 bulkhead luminaire with opal diffuser, complete all as specified and as directed.Make Havells Cat Part No. LHEOAOP7UZ6W010 or equivalent make.

Energy saving, environmental friendly, long life, corrosion resistant, impact proof, surface mounting decorative ultra slim linear LED lighting fixture with extruded AL. heat sink, environment friendly, enrgy efficient ready to use pack with LEDs of 20 Watt as light source, complete all as specified and as directed. Make Havells Cat Part No- LHEXBHP7PN1W020.

Socket outlet, 2 in 1, 5 pin, 5 Amps, universal type, ISI marked, complete all as specified and as directed.

Switch socket combination 2 in 1, and 3 and 2 pin 5 Amps, flush type universal, complete all as specified and as directed.

Switch socket combination 2 in 1, 3 pin and 5/15 Amps, flush type universal, complete all as specified and as directed.

Ceiling fan,regulator suitable for ceiling fans of 1200/1400 mm sweep, complete all as specified and as directed.

Taking down ceiling fan in repair and hanging again in position after the repair, complete all as specified and as directed.

Ceiling rose, surface bakelite 65 x 50 mm, two to three terminals, complete all as specified and as directed.

M & L complete for MCB distribution board, sheet steel, phasphatised powder painted with busbar neutral link, earth, bar & din rail conforming to IS 13032 & IS 8623 SPN 8 way double door, complete all as specified and as directed.

MCB single pole, and neutral 240 volts, 40 Amps, complete all as specified and as directed.

MCB single pole, and neutral 240 volts, 63 Amps, complete all as specified and as directed.

MCB single pole, 240 volts, 5 to 32 Amps, complete all as specified and as directed.

Rectangular heavy duty PVC block of size 40 x 30 x 5 cm depth, complete all as specified and as directed by Engr-in-charge.

S& F 4 way vertical sheet steel powder coated distribution board for multiphase outgoings suitable for MCBs fitted with Bus Bar, Neutral Link, Earth Bus Bar, Din Rail including one 4 pole 63 A techno isolator as incomer, complete all as specified and as directed. Make HPL Cat Part No. DBVDD04-ISO or equivalent.

Taking down old unsv submain wiring of any type and any size, complete all as specified and as directed.

Sub main wiring with single core PVC insulated (unsheathed multistranded copper conductor flexible FRLS cables drawn into and incl suitable size PVC casing capping and making good to match with existing surfaces with all fittings and fixing accessories of size 2 x 4.0 sqmm and 1 x 2.5 sqmm in earth wire, complete all as specified and as directed.

Earthing complete with steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1,5 metres below normal ground level,connecting to the Galvanised iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and steel earthwire protected by provision of GI Medium grade pipe 15 mm bore including provision of concrete pit made from PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) with 17mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25 x 25 x 6 mm with lugs 02 No and with 6 mm dia MS bar handle made to shape GI medium grade 20 mm bore pipe for watering perforated at bottom, 1.75 metere long placed on top edge of earth plate, common salt and charcoal fittings, test point made out of 17 mm x 8 mm FI with fixing arrangement, funnel wire mesh and earth work in hard / dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 M all as per electrical plate No 5 of SSR Part- I connected to earth test point all as specified or indicated including testing on completion.

vijay kumar

M/s Mool Raj Romesh Chander