Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.2 LAccepted-AOC AT POST SONAJ TAL MALEGAON DIST NASHIK | MALEGAON | NASHIK | MAHARASHTRA | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹30.8 L+₹2.6 L (9.28%)Rejected-Finance 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹32.0 L+₹3.9 L (13.7%)Rejected-Finance NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹33.8 L+₹5.7 L (20.2%)Rejected-Finance FLAT NO 601 TOWER NO 30 SECTOR NO 21 AMANORA PARK TOWN HADAPSAR PUNE 411028 | PUNE | MAHARASHTRA | 411028 | L4 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 5 | L5₹34.1 L+₹6.0 L (21.2%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
19 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MH AND RH KHADKI
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Khadki, Pune 411003
REPAIRS TO CRUMBLE JOINTS EXPANSION JOINTS JOINERY CEILING SHUTTERS GATES AND OTHER CONNECTED WORKS IN TECHNICAL ACCN AND OTM ACCN AT MH KHADKI UNDER GE MH AND RH KHADKI
2024_MES_643698_1
8530/E8
Open Tender
Civil Works
Item Rate
180 days
GE MH AND RH KHADKI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MH AND RH KHADKI
₹80,000
16 May 2024
22 Feb 2024
21 Mar 2024
22 Feb 2024
19 Mar 2024
7 Mar 2024
22 Feb 2024 - 12 Mar 2024
Amount
NOTE FOR ALL PAINITNG AND WATER PROOFING ITEMS :- The following precautionary measures shall be ensured by the contractor before and during execution of the work :- (i) All the painting works and water proofing works shall be got executed through original material manufacturing company or their authorised applicators as approved by GE and contractor should submit MOU with the manufacturing company or their authorised applicator before execution of work and entire work shall be executed with the approved firm. (ii) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (iii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iv) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.
Dismantling floor, hearth or wall tiling including cement mortar bedding/ complete and removing rubbish off the premises complete all as specified and directed.
M&L for screed bed or bedding layer 15mm thick in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer instruction (WPC Compound paid separately)
Supply only Liquid water proofing compound.
M&L Coloured ceramic tiles in vertical surface 300x200mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 10 mm thick backing coat in CM 1:4 all as directed.
M&L non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floor etc set and jointed in neat cement slurry to match the work using colour tiles over screed bed on bedding layer of mortar 15mm thick is CM 1:6 over cement concrete type B-0, 1:2:4 using 12.50mm graded stone aggregate as in floors 25 mm thick, all as specified and directed.
M&L for applying 20-40 mm in width Polyurethane sealant (Silane -terminated polyurethane compound) (Make :Asian smart care hybrid Pu sealant /Dr fixit PU sealant or equivalent) for sealing of dynamic joints and cracks in interior as well as exteriors of expansion joints/construction joints and other cracks complete all as specified and directed by Engineer-in-charge.
S&F 45mm dia Closed-cell polymer-based foam filler rod( supreme Dura rod or equivalent) in construction/expansion joints whereas required and patching the joint all as specified and directed
S&F 20-40 mm thick Crosslinked, pre-moulded, compressible joint filler board like Supreme "DURA BOARD HD 100"or equivalent ) in expansion joints whereas required and patching the joint all as specified and directed
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering and wall cladding all as specified and directed
S&F 0.63mm thick, plain galvanised Mild steel sheet as in repairs in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 in crumble/Expansion joint and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to RCC wall framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified and directed.
M&L for the tile joint chemical cleaning and re-grouting carefully by washing the existing tille with heavy duty tile cleaner preferbly of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, or equivalent , curing , cleaning the surface etc, complete all as directed by Engr-in-Charge and as per the sample done at ground level.
Making hole and M&L for fixing nozzles in construction joints/whereas required and patching the joint with cement sand mortar and grouting the nozzles thus fixed with PU inject grouting compound (Make Pidilite or equivalent ) and clean the RCC Subdtrate of all oil,grease and loosely adhering particles and repairs the cracks with CM 1:3 and Dr Fixit Pidicrete URP all as specified and directed
M&L for applying two coats fibre reinforced elastromeric liquid applied water proofing membrane coating (Asian smart care damp proof /Dr fixit roof seal classic or equivalent) over a coat of prime seal (Dr Fixit Prime seal or equivalent) of roof all as specified and directed all as specified and directed by Engineer-in-charge
Taking down cement plaster in any description incl racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed
M & L 15 mm thick rendering on fair faces of brickwork / concrete surface on wall in CM 1:4 using WPC @ 3% by weight of cement, all as specified and directed Note:- WPC shall be measured seperately.
Dismantling existing water proofing treatment from RCC roof and stone slab including removal of plaster bed below felt / membrane and disposal of the same to distance exceeding 50m but not exceeding 100m as and where directed as specified and directed by Engineer In Charge
M&L for water proofing treatment with polymeric standard water proofing membrane 3 mm thick and weighing not less than 3.0 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen - based prefabricated layer water proofing membrane reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/sqm of density at 25 degree centigrade 0.87 - 0.89 kg/litre and viscosity 70-160 cps or cold sticker and torch application of membrane with 10 cm overlap both ways after necessary preparation of surface complete as per manufacturers instructions.finally painted with a coat of bituminous aluminium paint @ 100gms/sqm over bituminous coat complete all as specified and directed.
M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 all as specified and directed
M&L for Hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 20mm thick in CM 1:3 mixed with water proofing compound and jointed, pointed in neat cement slurry mixed with 5% crude oil by weight of cement.
M&L for providing water proofing plaster at the junction of wall and slab at chajjas, lintels etc, of average thickness 20mm in CM (1:3) with WPC, finished even and smooth without using extra cement all as specified and directed Note:- WPC shall be measured seperately.
Demolition stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar.
M&L machine cut kota stone slab flooring 20-25mm thick in flooring but one piece as in treads of straircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing moulding complete, over 15 mm thick screed bed or bedding in CM 1:6for laying floor finishes, all as specified and directed.
Taking down chowkat or frame without taking off shutter from frame n.exc 1.5 Sqm each all as specified and directed.
Taking down chowkat or frame without taking off shutter from frame exc 1.5 and n.exc 4 Sqm each all as specified and directed.
Taking down shutter only n.exc 1 Sqm each and removing from the site all as specified and directed.
Taking down shutter only exc1 and n.exc 2 Sqm each and removing from the site all as specified and directed.
Taking down shutter only exc 2 Sqm each and removing from the site all as specified and directed.
S&F 2nd class hard wood plain, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in cupboards, almirah in any position including polish complete all as specified and directed.
S & F small articles of steel such as hold fast, etc of Gde Fe 410-0 or Fe-290 Gde E-165 complete all as specified and directed.
S &F Pressed steel frame for doors of size 125x 60mm made out of 1.25mm steel sheet, with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.
S&F pressed steel frame of size 105x60mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.
M&L PCC 1:3:6 type C-0 using 12.50mm graded stone aggregate as in filling of pressed steel chowkat all as specified and directed
M & L for cement concrete 1:2:4 type B1 using 20mm graded aggregate for filling in holdfast complete all as directed.
S&F 35mm thick(Ist Class hardwood) factory made gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze , etc (without sash bars) , edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass , etc, sizes of members of shutters as specified in SSR Part I , Section 8 , Clause 8.20 (a), supplied and fitted to chowkats complete all as specified and directed.
S & F 35mm thick factory made second class hard wood plain, framed , panelled shutter (2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated all as specified and directed.
S&F 30mm thick square size vision panels Flush shutters, solid core construction, with particle board core and plywood face panels, decorated face venner with lipping on both sides (S&F Glass measured seperately) for hospital ward purpose complete all as specified and directed.
S&F 46mm thick fire rated door including frame /chowkatss(2 Hours) with mire mess glass panel size is 0.2mx0.3m including 60-65 Micron Epoxy polyester powder coating for doors and frames including all necessary fittings including complete all as specified and directed by manufacturing instructions/ specifications Make TATAPravesh or Equivalent
S&F GI powder coated Hermatically sealed automatically sliding door including frame 30mm thick single piece, coloured coated, PUF filled doorshutters with PUF (Poly Urethane Foam) insulation of minimum density 40 Kg/Cum filled in between two moc sheets of thickness 0.8mm (min), border covered with glass Panel size 310 x 465mm, 1.2 mm thickness of door frame, reinforced with two number 10mm CTD bars of suitable sizes for receiving hinges, tower / sliding bolts, towel rails, handles etc,with/without embossed pattern, size is exc 3.00 sqm but not exc 6.00 sqm for operation theatres and ICU wards complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm & not exc 2 Sqm for fixing in same opening including easing, adjusting and refixing builders hardware as required and renewal of unserviceable screws complete all as specified and as directed.
S&F 100mm size, butt hinge extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed complete all as specified & directed.
S&F 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed.
S&F for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed.
S&F 150mm size aluminum handles, cast type anodised complete all as specified & directed.
S&F floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made PVC solid panel door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd withheat moulded plain coour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panellinn of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site complete all as directed.
S & F 75mm Butt hinges, extruded aluminium alloy with galvanised steel hing pin, anodised and fixed as directed.
S & F in 125 mm size extruded aluminium alloy handles, fabricated type anodised.
S & F in 125mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
M&L for preparation to new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer all as specified and directed.
S & F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows,ventilators and partitions with one or more rebates including joining cleat for fixing etc complete all as specified.
S & F in repairs to anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for partitions with one or more rebates including joining cleat for fixing etc complete all as specified.
S&F Anodised aluminium power coated (minimum thickness of powder coating 50 micron) door shutters of aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all as specified and directed.
Supply only 5.5mm thick sheet glass ordinary quality and glazing exceeding 0.5 Sqm in each pane all as specified and directed .
M&L 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, aluminium works etc complete all as specified.
S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and nut bolt,fixed complete all as specified and directed.
Dismantling of structural steel work including doors, gates, rolling shutters etc but excluding framed truss etc., complete all as directed.
S&F Steel work in tubular trusses for extenal facia canopys,sunshades including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 all as specified and directed.
M&L for pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding of wall fixed with self tapping screws of any sizes complete all as specified and directed
M&L for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer complete all as specified.
S&F in repairs 40mm width continuous (paino) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed
Dismantling wall and ceilihg boards (Fiber pulp, insulation etc or insulation boards) any thickness including cover fillets.
M&L anodised aluminium snap grid ceiling with 19mm thick semi - perforated edge 60x60cm in ceiling board over GI grid prelude XL 24 mm grid main runner height 37mm and secondary runner height 30mm including 2.6mm/2.8mm GI wire suspenders of suitable length as per manufacturers instructions complete all as specified and directed.
S & F gypsum wallboard, 12 mm thick as per IS 2095 (Part 1): 2011, tapered edge, fixing to ceiling section and perimeter channel using dry wall screws of size 3.5 mm X 25 mm at 230 mm c/c including GI Wire mesh frame work ,jointing and finishing to a flush finish of tapered edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint complete all as specified and directed.
M & L in repair for 18/19mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work including teakwood lipping 6mm thick fixed with nails fixed for cub board shutter etc complete all as specified and as directed .
S&F in repairs 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work as in shelves all as specified and directed.
S&F in repairs 100mm size, butt hinge extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed complete all as specified & directed.
S&F in repairs 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed.
S&F in repairs 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed.
S&F in repairs 150mm size aluminum handles, cast type anodised complete all as specified & directed.
S&F in repairs floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor
S & F in repairs 125 mm size extruded aluminium alloy handles, fabricated type anodised.
S & F in repairs 125mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F in repairs cup board knobs 40mm size with all fixing screws etc complete all as sepcified and directed.
S & F in repairs to stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and nut bolt, fixed complete all as specified and directed.
Hacking out old broken glass (any size, quality or description) from aluminium frames, glazing with putting or beads.
S&F 4mm thick sheet glass, ordinary quality and glazing n exc 0.5 Sqm.m in each pane including necessary cleats, glazing clips rubber packing, anodised aluminium snap beading, screws complete all as specified.
S&F 4mm thick figured glass pin headed type and glazing not exc 0.5 sqm in each pane including necessary cleats, glazing clips rubber packing, anodised aluminium snap beading, screws complete all as specified.
S&F in repair 4 levers mortice lock brass vertical type 100mm for aluminium doors with triplicate key etc complete all as spfd and directed.
S & F in repairs aluminium anodised brakets for curtain rods complete all as specified and directed.
S&F in repairs 20mm aluminium anodised curtain rod fixed to brackets, stops, rollers etc complete all as specified and directed
S&F in repairs drawer handles , mild steel , flush drop (65 to 75mmm grip) on 4 screw plate, including lettin in complete all as specified and directed.
S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S&F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
M&L preparation of old painted surfaces of wood and wooden based surfaces over 10cm width of girth and applying one coat of synthetic enamel paint.
M&L preparation of old painted surfaces of steel and iron surfaces over 10cm width of girth and applying one coat of synthetic enamel paint.
JP ENTERPRISES
S.R.M.K Enterprises
UNIQUE ENGINEERS
M/S SANDEEP CONSTRUCTION COMPANY
M/S JAYCONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .