PROVN OF CERTAIN SANCTIONED WORK OF AGE B/R-II (W) AGRA UNDER GE (W) AGRA

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out all as specified and directed.

Excavation in trenches n exc 1.5 m wide & n exc 1.5m deep and getting out in any type of soil.

M&L for applying two coats of cement based paint over a coat of primer on newly plastered surfaces including preparation, complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Demolition Cement concrete (Reinforced) in Roofs, floors, beams, staircases, landing, and similar work, complete all as specified and directed.

M & L for flat Rough finished formwork to plinth/ lintel beam, soffits, roof beams, lintels, cantilevers, shelves, similar work etc. including supports.

Demolition of brickwork built in cement mortar including all quoins arches pillar etc.

Rolling and consolidating of formation surfaces in cutting with 8 to 12 tonne power roller incl filling deposited with approved soil all as specified and directed

M&L for Soling (or sub base) 150 mm thick with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified

M&L cement concrete type B2, 1:2:4 (40 mm graded aggregate) 100 mm thick complete all as specified and directed.

100mm thick Plain cement concrete (1:3:6) type C-2, using 40 mm graded stone aggregate as in sub base of floor, finished even and rough to re-ceive topping layer complete all as specified and directed.

M & L for PCC 1:4:8 (75mm thick) Type D-2 using 40 mm graded aggr in fdn, filling and mass concrete complete all as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 cm using soils.

M&L for brickwork with fly ash brick (old size) built in CM 1:6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

M&L brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified as directed.

M&L for moorum/red bajri filling in floors/sub base or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed incl watering.

Spreading and levelling (Soil) in layers n exc. 25, well ramming including watering as required, complete all as specified and directed.

M & L for hard core of broken stones or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L hardcore of gauge exc.63 mm but not exc 100 mm deposited , spread and levelled in layers n exc. 15 CM thick, watered and rolled/rammed to a true surface complete all as specified and directed.

Demolition of cement concrete (unreinforced) in gd floor and paving n.exc 15 cm thickness below or above the gd level.

M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40mm gradded crushed stone aggregate) as in sub base of hard standing/floor.

M&L for 75 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in under floor and finished even and smooth without using extra cement complete all as specified and directed.

S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etcof gradeW(Gde-E-250)quality-B complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment , gusset plates, riveting etc,platform etc conforming to Fe 290 Gd 165 complete all as specified and directed.

S&F framed work such as hold fast and similar work including welding/reveting, fixing with screws, nut bolt etc complete all as specified and directed.

S & F Welded steel wire fabric n exc 4Kg complete to brick/concrete wk or steel members complete all as specified & directed.

S & F framed work such as grills, door frame, gratings and similar work incl welding conforming to Fe.290.Gde-E-165 complete all as specified & directed.

S & F 1.25 mm thick mild steel, plain, black sheet in door shutter,steel gates and similar work, cut to size, holes punched; including welding/reveting, round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles complete all as specified and directed.

S & F mild steel sliding door bolt 375 mm long stove enamealled black with bright bolt not less than 16 mm dia with and including and minimum of 6 boalts and nuts four on bolt plat and two on staple plate and fixed etc.

M&L for 40 mm thick cement concrete type B0 1:2:4 using 12.5mm graded aggregate as in floor complete all as specified and directed

M & L for TMT 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beam and Fdn, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified and directed.

M & L for TMT 5mm dia and over, upto 10mm dia in stirrups/ties, spacers and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns/beam, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone as in bed block and copping, post hole and benching embedding of hold fast etc complete all as specified and directed

M & L for RCC 1:2:4 type B1 (20mm graded stone aggregate) Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for RCC 1:2:4 type B1 (20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M & L for RCC 1:2:4 type B1 (20mm graded stone aggregate) Columns,pillars, piers,posts and struts complete all as specified and directed.

S & F formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

S&F formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work (Horizontal or sloping for rough finished surface of concrete complete all as specified and directed.

S & F formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L PCC 75 mm thick (1:3:6) type C-1 using 20 mm graded aggregate, plinth protection / sub base etc.

Taking down cement plaster on brick or stone walls/RCC ceiling including racking out joints, hacking for key, scrubbing down with wate, including necessary scaffolding etc removing rubbish off the premises.

M & L for two coat of synthetic enamel paint on new steel surfaces over one coat of red oxide primer including preparation of surfaces complete all as specified and directed.

Excavation over areas n.exc 1.50m deep and getting out in soft/loose soil complete all as specified and as directed

M&L for rendering 10-12 mm thick smart care ready mix repair plaster with high quality polymer additives & well graded sand & fillers which can be used for plastering as per manufactures instruction over interior surface of wall complete all as specified and directed

M&L for applying two coats of white/colour washing on newly plastered surfaces of wall including preparation complete all as specified and directed.

M&L for preparation of newly plastered of surface and three coat of white wash on ceiling surface incl complete all as specified and directed.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed.

M&L for coloured glazed digital ceramic tiles in vertical surface Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick screed bed in CM 1:4 as in verticle surface etc complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) 75 mm thick as in sub base of Chequered path/paving finished even and fair without using extra cement complete all as specified & directed.

M&L for providing, cement concrete 1:2:4 type B-0 using 12.5 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

M&L for 60 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M35 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over sand cushion layer with grey cement and pigment complete all as specified and directed.

M & L for chequered cement concrete colour tiles 30cm x 30cm x 25mm thick, set, jointed with white cement & pigments and pointed in neat cement slurry including screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying in floors.

S & F steel ventilators with top hung shutter with glazing bars, hinges, steel peg stay complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made solid PVC moulded door shutter 28 to 30 mm thick(stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specifications & drawings shown in section 8 of SSR Part II complete all as directed.

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges,125 mm) complete all as specified and directed.

S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium handles, cast type, anodized and fixed complete all as specified and directed.

S & F 250 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc.

S & F Vitreous China Urinal, full stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S & F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe).

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S & F vitreous China wash basin, white, flat back, size 630x450mm including bracket complete all as specified and directed.

S & F for waste pipe for WHB / urinal, 32/40 mm dia complete all as specified and directed.

S&F Vitreous China, semi-pedestal pattern (Anglo-Indian Type) complete with seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device including necessary traps including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.complete complete all as spfd and directed.

S&F low level flushing cistern of capacity 10 litre ISI marked complete with inlet ball valve, connection to pipes and handle including connecting flush pipe, bracket etc complete all as specified and directed.

S&F PVC Jet spray 15mm bore suitable for EWC complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F for 15 mm bore, fancy type, chromium plated, pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, long screwed shanks and fly-nuts and fixed to pipe,complete all as specified and directed.

S & F 15 mm chromium plated Bib taps fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe) complete all as specified and directed.

m chromium plated Stop valves, fancy type (angle valve) cast copper alloy screwed down high pressure with crutch or but terfly handle screwed both ends for iron pipe or for unions and fixed (15mm bore dia of pipe) complete all as specified and directed.

S&F soap dish, brass, chromium plated,size 100X60mm, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F PVC Jet spray 15mm bore suitable for EWC complete all as specified and directed.

S&F single piece EWC with UF seat cover hinges,fixing accessories set,cistern fittings,rim less tornado flushioning size 360 x 680 x 750 mm complete all as specified and directed.

S&F wall mixer with provn for OHS with 115mm long bend pipe side connecting legs and wall flange for 15mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm bore brass chromium plated single lever basin mixture with 300mm and 600mm braided connection pipe(without pop up) for making hot and cold water screwed down for pipe and fixed complete all as specified and directed.

S & F PVC connections 15 mm dia with PTMT nuts of length 450 cm complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms)

S&F towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S & F grating doom 100/125 mm dia with waste hole/without waste hole of PTMT/ CP. (Minimum weight 40gms)

Cutting chases, pinning in making good to facings where required an pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. complete all as specified and directed.

S & F 75 mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed by the Engineer-in-charge.

S & F 75 mm bore PVC (SWR) junction single (single T) equale or unequale complete all as specified and directed by the Engineer-in-charge.

S & F 75 to 110 mm bore PVC (SWR) reducer complete all as specified and directed.

S & F 110 mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed by the Engineer-in-charge.

S & F 110 mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed by the Engineer-in-charge.

S & F 110 mm PVC (SWR) Vent cowl complete all as specified and directed.

S & F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

S&F 20 mm dia uPVC pipes of pressure rating 10 kgf/sq.cm fixed complete, laid in floors/ wall complete all as specified and directed.

S & F 20 mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 20 mm outer dia of CPVC brass elbow fixing to CPVC pipes any location complete all as specified and directed.

S&F 20 mm outer dia of CPVC brass tee fixing to CPVC pipes any location complete all as specified and directed.

S & F rotational moulded polyethylene three layer water storage tanks with cover (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of water tank 1000 litres.

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule for 20mm bore dia of pipe

M & L for PCC 1:4:8 type D2 as in concrete bed 110mm bore of drain pipes including packing under, haunching against the sides of pipes after they are laid and tested.

M&L for pre-cast RCC slabs as in drain/manhole covers in 1:2:4 type B1 using 20 mm graded stone aggregate, set in cement mortar (1:4) incl use and waste of form work complete all as speciied and as directed.

Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed masonary with top ring of M-25 Concrete, including intercepting chamber, screen chamber made of brick work in CM, RCC cover slab in M-25/ SFRC Cover interconnecting pipe of RCC/DWC complete filled with brick bats of size 2.4 Mtr x 3 Mtr effective depth.

S&F Reinforced concrete 150mm bore of pipes class NP2, laid and jointed complete with collars all as specified and directed.

Cutting into existing manholes for connecting new drains and making good to pipe and rendering cutting out existing bending for and forming branch channel in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for pipe 150mm bore complete all as specified and directed.

Excavating in post holes (or similar holes) each n. exc 0.5 cum, getting out,in any type of soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and making good surface.

M & L applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5kg/Sqm/2coats spray/brush applied, with an elongation of 300% to 700% and tensile strength of not less than 3N/Sqmm as per ASTM D412 and ASTM C2370, crack bridging ability of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm (like cipoxy 16D etc) and a geotextile of 40 GSM to be applied which is the combination of base and hardener water based epoxy system as per manufacturer's instructions complete all as specified and directed.

S & F for lead lined door 46-60 mm thick (double leaf) (size up to 5.5 Sqm) including taking down of fexisting door and prepare sufrace wall plaster with paint to match exsting surface of wall, james all around lead sheet radiation resistent required size steel frame (2mm thick lead sheet 99%purity) SS hinge 150 mm size, 4 Nos each leaf of door, 2 nos heavy duty door closer on top of the each leaf needed to smooth and controlled closer up to 80 Kg weight capacity, mortise sash lock with half cylinder and lever handle provided proper security, 2Nos of lead vision glass (size 350 mm X 350 mm ) in each leaf with lead coating, frame the door should be designed to meet specific radiation protection as per AERB inner sheet should be polyurethane puff (density 40 Kg/cumec) 4 Nos of SS hermed handle on both side of door blade of smooth and easy opening & closing all as completed and specified. (Note:-Door should be installed after approval of GE.)

M&L 20 mm Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner)complete all as specified and directed.

Supply only glass dividing strips 3 mm thick of width 20/22 mm complete all as specified and directed.

M&L for rendering 10-12 mm thick smart care ready mix repair plaster with high quality polymer additives & well graded sand & fillers which can be used for plastering as per manufactures instruction over exterior surface of wall complete all as specified and directed

Supply only metallic floor hardner for floor finishes and paving (as approved by GE nito bond EP base resin FOSROC) complete all as specified and directed.

Polythene film black 50 micron laid over floor complete all as specified and directed.

M & L for cement concrete work in pavement /hard standing of flexural strength 40Kg/per sqcm in field using 400 Kg of cement per cum thickness of concrete 25cm or less complete all as specified and directed.

Forming 12 mm thick expension joints fi