COMPREHENSIVE REPAIR TO CERTAIN BLDG IN CNAI CCDT, LWT, FLEET OFFICE, FMU EMC, NSOD AND CERTAIN BLDG UNDER AGE B/R-II UNDER GE (NW) KUNJALI, COLABA, MUMBAI

Amount

Taking down chowkat with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4 Sqm each.

Taking down chowkat with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified

Taking down shutter of any description area exc 1 Sqm and n.exc 2 Sqm each.

Dismantling floor hearth or wall tiling including cement mortar bedding / backing coat and removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, (measured overall as fixed along the centre line over fittings and accessories).

Material & Labour for 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), in floor laid in floor over and including 20mm thick screed bed or bedding layer in cement mortar ( (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), as in vertical surfaces such as skirting/dado etc., laid over and including 10mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm, in floor laid in floor over and including 20mm thick screed bed or bedding layer in cement mortar ( (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tilesexceeding 0.06sqm but not exceeding 0.11 sqm, as in vertical surfaces such as skirting/dado etc., laid over and including 15mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm laid in floor over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick but laid on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Mirror polishing on marble/granite/kota stone/stone work/Mosaic tile where ever required to give high gloss finish complete

Material & labour for machine cut, machine polished granite stone slab 20mm thick in flooring set, bedded and jointed with white cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:4) complete all as specified .

Material & labour for machine cut, machine polished granite stone slab 20mm thick set, bedded and jointed with white cement paste and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including backing coat 10 mm thick on fair faces of brick or concrete surface in cement mortar (1:3) complete all as specified.

Material & labour for cement concrete tiles 250mm x 250mm x 22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layer in CM 1:3. complete all as specified .

Material & labour for chequered cement concrete tiles 300mm x 300mm x 25 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 20mm thick bedding layer in CM 1:6. complete all as specified .

Material & labour for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 50 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, false ceiling, wall panneling & partation boards bonded wool, blanket slab incl aluminium grid frame work complete all as specified.

Supply & fixing aluminium anodized snap grid of size 605 x 605 mm with aluminium anodized angle 20mm x 20mm x 1.2mm fixed along the wall and main and cross tees of size 36.5mm x 23.5mm x 1.5mm and 23.5mm x 23.5mm x 1.5mm respectively with ceiling cleats / angle brackets of size 15mm x 15mm x 1.5mm including suspended GI wire hangers 6mm dia.upto 1200mm length with adjusting level and fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3mm x 60mm long and expansion hold fasteners 12.5mm dia. 40mm long @ 20cm c/c including dismantling carefully old false ceiling with ceiling boards, electrical fittings, fan, fire sencers etc and making good disturbed surface as per existing complete all as specified and directed . Note- New ceiling board will be measured & paid separately

Material & labour for 4 mm thick high pressure steam cured non asbestos fiber cement designer ceiling board having dennsity>1200Kg/Cum of size 600mm x 600mm fixed or laid/inserted in aluminium grid false ceiling complete all as specified.

Material & labour for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old unserviceable false ceiling complete all as specified and directed.

Supply & fixing powder coated aluminium sections for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, cleats etc including all accessories such as glazing clips, handles, tower bolts, rollers rubber beadings for fixing glass panes in frame including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specified Note: - (i) Glass panes will be measured & paid separately. (ii) Rubber beading will not be weighed and paid separately (iii) Minimum thickness of powder coating shall be 25 micron.

Supply & fixing in repairs 5mm thick glass sheet one side frosted ordinary quality and glazing with in square, n exc 0.5 Sqm in each pane, fixed with rubber beding in aluminium windows/doors complete all as specified

Supply & fixing in repairs 5mm thick glass sheet one side frosted ordinary quality and glazing with in square, exc 0.5 Sqm in each pane, fixed with rubber beding in aluminium windows/doors complete all as specified

Material & labour for 4 mm thick plain sheet glass ordinary quality in squares n.exc 0.5sqm in each pane fixed with rubber beding in aluminium windows/doors complete all as specified .

Material & labour for 4 mm thick plain sheet glass ordinary quality in squares exc 0.5sqm in each pane fixed with rubber beding in aluminium windows/doors complete all as specified .

Supply & fixing in repair aluminum anodised GRILL Deco grill DG 103 of 7.5 mm thick fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows complete all as specified and directed by Engr-in-charge.

Supply & fixing in repairs 12 mm thick pre-laminated Medium Density fibre board, both side decorative lamination interior grade ,fixed in aluminium/ wooden frame work complete all as specified.

Material & labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth with and including 1 mm thick sagol complete all as specified.

Material & labour for rendering 15 mm thick on fair faces of brickwork or concrete surfaces in CM (1:4) mixed with integral water proofing compound @ 3 % by weight of cement and finished fair and even complete all as specified.

Supply only water profing compound complete all as specified.

Material & labour for preparing new plastered surfaces of walls/ceilings and applying two coats of weather proof antifungal acrylic exterior paint (100% Acrylic) over a coat of primer including necessary scaffolding and safety arrangement complete all as specified.

Material & labour for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in CM (1:3) and finished even and smooth without using extra cement complete all as specified.

Material & labour for preparing new plastered surfaces of wall, applying one coat of wall care putty not less than 3mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

Material & labour for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified .

Material & labour for prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper complete all as specified.

Material & labour for preparation of old decorated wall surfaces of any description & applying one coat of acrylic antifungal exterior grade paint (100% Acrylic) (100% Acrylic)

Supply & fixing 3 mm thick aluminium composite panel cladding plain of approved colour/shade/pattern to beam/column/slab in circular/rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hallow section 25mm x 25 mm not exceeding 900 mm C/C on existinging column/beam/slab to hold APC cladding complete all as specified.

Material & labour for preparation of floor/Roof surfaces by completely clean, dry and free of oil, grease, wax, polish, old paintand applying two coats of epoxy floor p, highly durable, gloss and better srratch resistance complete as per manufacturers instructions.

Providing and applying double layer with Chowgule Koster dachflex super crack sealer for repairing the cracks of the external wall areas. MAKE: Chowgule Koster (I) Construction Chemicals Pvt. Ltd

Material & labour preparation of old plastered and cracked surfaces of walls external , applying two coats of non dilutable Dr.Fixit Raincoat over a coat of Dr.Fixit primeseal primer having dft of 110 micron and elongation of >200% on external surface as per manufaturer instruction complete as specified and directed by Engineer-in- charge.

Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200 mm X 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thick top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 850 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting ,End edge, T- moulding,Reducer) shall have to be added separately,wherever required complete all specified and directed by Engr-in-Charge.

-Ditto- all as per item No 44.00 above but in skirting , 100mm high.

Supply & fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with suitable size GI clamps complete all as specified and directed.

Supply & fixing for PVC (SWR) bends any radius 110mm bore complete all as specified.

Material & labour for 100mm bore cast iron soil, waste and vent pipes,sand cast, in any length with or without ears with cement joints fixed to walls with and including suitable size GI clamps or laid in trenches complete all as specified and directed.

Material & labour for 75mm bore cast iron soil, waste and vent pipes,sand cast, in any length with or without ears with cement joints fixed to walls with and including suitable size GI clamps or laid in trenches complete all as specified and directed.

Supply & fixing 75mm bore CI bends,any radiius) diminishing pieces or trapers ( larger bore measured ) fitted with oval access doors of following sizes

Supply & fixing 100mm bore CI bends (any radiius) diminishing pieces or trapers (larger bore measured) fitted with oval access doors of following sizes

Supply & fixing in repair 75mm bore of outler cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed.

Supply & fixing in repairs 100mm dia of outler cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed.

Supply & fixing 15 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings or laid in floors with suitable size GI clamps including taking down old GI tubing including fittings complete all as specified.

Supply & fixing in repairs of vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , fixing with automatic flushing system with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed .

Supply & fixing in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed.

Supply & fixing in repairs 32mm dia PVC waste pipe for WHB and urinals fixed complete all as specified and directed.

Supply & fixing in repairs 15mm bore bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down & fixed complete all as specified.

Supply & fixing in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets for fixing purpose, waste brass chromium plated with long screwed shanks and fly nuts including 32 mm dia brass CP waste coupling and brass chromium plated bottle trap 32mm bore and making all connections complete all as specified.

Supply & fixing in repairs 15mm bore pillar taps cast copper alloy, chromium plated, fancy type with capstan heads screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply & fixing in repairs vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rest (excluding flushing Cistern, flush pipe etc) including 'P' or S trap and provision of lime concrete bedding and making all connections complete all as specified.

Supply & fixing in repairs vitreous china wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) and making all connections complete all as specified and directed.

Supply & fixing in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply & fixing in repairs 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply & fixing in repairs brass Chromium Plated towel rail, 20mm dia, D type , 60 cm long between flanges complete all as specified.

Supply & fixing in repairs toilet paper holder of viterous china box type white fixed to walls with chromium plated brass screws complete all as specified and directed.

Supply & fixing in repairs brass CP shower rose 125mm size complete all as specified and directed.

Supply & fixing in repairs sinks with drainage bard made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwar wall or including fxing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified .

Supply & fixing in repairs 15 mm bore PVC connection of length 450mm long complete all as specified and directed.

Supply & fixing Ist class hard wood (teak) glazed and skelton shutter 30 mm thick open rebated and prepared to receive glass gauze etc, divided into squares, with plain, chamfered or rounded mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc size of members of shutters as specified in SSR part I, section 8, clause, 8.20 (b) complete all as specified.

Supply & fixing 35mm thick second class hard wood (Sal) , plain, framed factory made panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I),kiln seasoned and chemically pressure treated complete all as specified.

Supply & fixing Ist class hard wood (teak) plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

Supply & fixing MS work as in holdfast and similar articles conforming to grade Fe 410-0 and Fe 310-0.

Supply & fixing butt hinges medium weight cold rolled mild steel 100 mm long.

Supply & fixing 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11

Supply & fixing in repairs 200mm long aluminium anodized barrel tower bolt of extruded sections ISI marked complete all as specified .

Supply & fixing in repairs 150 mm long aluminium anodized barrel tower bolts of extruded sections ISI marked complete all as specified .

Supply & fixing in repairs 150 mm long aluminium anodized barrel tower bolts of sections ISI marked complete all as specified .

Supply & fixing 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy ISI marked complete all as specified and directed.

Supply & fixing in repairs 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy ISI marked complete all as specified and directed.

Supply & fixing for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

Supply & fixing 150mm extruded aluminium alloy handles, cast type ISI marked complete all as specified and directed.

Supply & fixing in repairs 150mm extruded aluminium alloy handles, cast type ISI marked complete all as specified and directed.

Supply & fixing 100mm extruded aluminium alloy handles, cast type ISI marked complete all as specified and directed.

Supply & fixing in repairs 100mm extruded aluminium alloy handles, cast type ISI marked complete all as specified and directed.

Material & labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified .

Supply & fixing in repairs prelaminated 12mm thick particle board exterior grade prelaminated both sides with decorative choice lamination fixed with screws to timber/ metal frame work complete all as specified and directed

Supply & fixing solid PVC door frame of size 50mm x 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet as per specification and drawings shown in SSR Part II complete all as specified .

Supply & fixing factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site as per specification & manufacturers instructions.

Supply & fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Material & labour for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).

Supply & fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4mm and fixed with stainless steel wire staples complete all as specified

Supply & fixing in repairs 4 mm thick bakelite sheet with decorative choice laminated on both sides complete as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Material & labour for MS framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings etc conforming to conforming to Fe.290.Gde-E-165 complete all as specified

Material & labour for preparing new or previously untreated surface of steel of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

Material & labour for preparation of old steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified .

Supply & fixing expanded metal, weight nexc 4.00 Kg per sqm bent to shape required and tying with and including annealed mild steel wire not less than 0.90mm dia or fixing with galvanised steel staples suplied and fixed complete to wood or steel members, complete all as specifed.

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & labour for brick work with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed

Material & labour for Stainless steel decorative railings, staircase made out of SS pipes, SS flats, SS plates etc. of grade 316 complete with and including necessary welding, buffing/ polishing and fixing including taking down old railing complete all as specified and directed by Engineer-in-Charge. Note - Design and pattern shall be as approved by GE.

Material & labour for Stainless steel decorative chains of grade 316 having 8mm minimum thickness as used to connect two stainless steel post with hooks etc. including necessary welding, buffing/ polishing and fixing including taking down old chain complete all as specified and directed. Note - Design and pattern shall be as approved by GE.

Material & labour for cleaning and desilting of sewage lines of any size including manholes, gully traps of any size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements, face mask etc and removing the silt,sludge & other waste material in leak proof trucks covered with tarpouline outside MD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water complete all as specified and directed by Engr-in-Charge. Note: i) Length of sewage lines including manholes, chambers, traps etc will be measured for payment. ii) The place of disposal shall be find out by the contractor.

Supply and fix rolled mild steel as in Plates (Plane or Chequered) channels, for Manhole cover etc, square cut or noteched (ordinary and counter sunk) forming holes, without any attachment conforming to Grade FE 410-W, (Gde- E-250) quality-A complete all as specified.

Material & labour for water proofing treatment of sunken floor/wall surfaces by applying two coats of water proofing chemical PIDICRETE UPR and cement, mix in ratio 1:1.5 complete including filling PCC 1:7:12 type F2 using 40mm graded stone aggregate complete all as per manufacture's instructions and as directed.

Errection & dismantling of MS tubular double scaffolding (H frames) upto ht of 30 m & with necessary brassing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloth upto top of the scaffolding for carring out external facework of walls all as directed by Engr-in-Charge.

Material & labour for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instructions.

Supply & fixing Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

Supply & fixing in repairs Push type tap for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified.

Supply & fixing in repair health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as directed.

Material & labour for 10mm thick toughened glass door , double shutter including providing SS pivots, door closer, SS corner supports as required, SS handle 600mm long fixed on both shutter, SS studs 1200mm long, locking arrangement and necessary SS accessories like clamps as required at site complete all as directed.

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.

Supply & fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.

Material & labour for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde E- 250) quality A complete all as specified .

Material & labour for 100 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) diameter of outlet in 100 mm all as specified and as directed.

Material & labour for 75 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) diameter of outlet in 75 mm all as specified and as directed.

Complete removal of existing water proofing treatment from roof top including PCC padding/ plaster of any description and thickness, cleaning the top surface with wire brush to remove all loose parts, sweeping, cleaning and washing down with water to remove dust complete all as specififed and as directed.

Material & labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in padding for maintining roof/chajja slope and finished even and fair complete all as specified .

Disconnecting existing water tanks, any capacity, setting aside (or lowering if required) for repair/ laying WPT and hoisting, reconnecting and refixing in position complete all as directed by Engr in Charge.

Material & labour for brushing neat cement slurry with 3.0 kg of cement per Sqm on cleaned and washed concrete surfaces all as directed by Engineer-in-charge.

Material & labour for providing water proofing treatment with five layered 4mm thick APP (Atactic Polypropylene) modified bituminous membrane re-inforced with no woven polyester mat of weight not less than 180 gms/Sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythylene applied by thermo fusion using LPG torch on bottom portion of the membrane after applying a coat of bituminous primer @ 0.25 Kg/Sqm over roof and over the APP membrane provide a polypropylene/ polyester, Non woven geotextile fabric of 150 gsm over the geo textile fabric (An overlap of 100mm at end & 75mm shall be provided on sides ) complete all as per manufacturers instructions and through approved applicator. Note- The membrane shall be inserted in the wall at the height of 800 mm by cutting groove in the wall finished by membrane flashing.

Material & labour for rendering 20mm thick cement plaster in CM (1:3) mixed with water proofing compound @ 3% by weight of cement on roof top surface finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measuerd and paid separately.

Supply only integral water proofing compound.

Material & labour for 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

Material & labour for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .

Material & labour for Cement Concrete tiles 300mm x 300mm x 22mm thick machine pressed, set, jointed and pointed in neat cement slurry in floors and cut and polished with grey cement and pigments laid over and including 15mm thick screed bed in CM 1:4 complete all as specified.

MADHU ENTERPRIZES (BID ID -3114492)

SHRI SAI ENTERPRISES (BID ID -3114953)

Sachin santosh dalvi (BID ID -3114745)

SR Construction (BID ID -3114687)

Nilesh Construction (BID ID -3114647)