Construction of Divisional Controller office in 3rd floor of City Bus Terminal at Belagavi

Construction of Divisional Controller office in 3rd floor of CBT

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) ...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all material...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mo...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colo...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Eng...

Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with p...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer a...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at join...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

Providing and fixing wash basin with C.I. brackets,15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wal...

Providing and fixing white vitreous china extended wall mounting water closet of size 780 x 370 x 690mm approved shape including providing & fixing white vitreous china cistern with dual flush fitting...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complet .(SR of 23-24/P-127/13.59)

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made o...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, in...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , ...

Providing and fixing 600x450mm size rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including cost of materials, labourcomplete as per ...

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. (SR of 23-24/P-137/I-14.40.2)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over a...

Providing & fixing of 3 - track x 2 - panel sliding windows made out of multi chambered UPVC(Matching to RAL - 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic ...

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 20mm Dia heavy pipe. (CSR 23-24/Vol-II/Page No.106/I-12.67.1)

Providing & fixing 100% Polyester Curtains with specification ofregular wash as per direction of Engineer in charge. (CSR 2023-24/Vol-II/Page No.219/I-22.24)

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining /cladding with necessary screws, including priming coat on unexposed surface with ...

Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engine...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

Removing serviceable glass of any description from old wood or metal frames ( any thickness or size, quality or description ) hacking out old putty etc., including risk and making good breakages in ta...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped...

Providing & fixing furniture and workstation

Providing and fixing meeting table consisting of 25 mm thick PLPB table top edge bounded, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, Hardware-Minifix asse...

Providing and fixing conference table consisting of 25 mm thick PLPB table topedge bounded, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, Hardwar...

Providing and fixing STRAIGHT WORKSTATION (Frame and Separator)consisting of back to back unit made out of 75 mm thick MS CRCA powder coated, tile based system for main spine, Seperator 25mm thick ...

Providing and fixing STRAIGHT WORKSTATION (Frame)consisting of back to back unit made out of 75 mm thick MS CRCA powder coated, tile based system for main and return spine, Top tile finish 8 mm thick...

Providing and fixing Free Standing Table for Cabin - without frames consisting of 25mm thick PLPB with edge bombed End table ,18mm thick PLPB with edge bondede Modesty, Wire manager -ABS plastic gromm...

Executive chairs-mid back: the seat assembly shall be made up of 1.2cm thick hot pressed plywood, upholstered with fabric upholstery covers and moulded polyurethane foam. The seat size shall be 47cm(W...

Officers Chair the seat shall be made up of insert moulded , polyurethane foam upholstered with foam laminated mesh fabric. The insert moulded foam shall be assembled over a load bearing plastic seat ...

Electrical Works

Supplying heavy gauge PVC conduit pipe 20mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted ...

25mm dia 2 mm thick PVC Conduit Pipe. Make:Finolex/AVONPLAST/V I P /CSR 2023-24. VOL-6, PART-III, SRP 2 of 105, 1.1.2

Supplying PVC flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge ...

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm etc. as req...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

2.5mm2 copper Wire .Make: Finolex/Polycab/V-Gaurd/havells/

CSR 2023-24. VOL-6, PART-III, SRP 5 of 105, 2.3.3.

4 mm2 Copper Wire. Make: Finolex/Polycab/V-Gaurd/havells/

CSR 2023-24. VOL-6, PART-III, SRP 5 of 105, 2.3.4.

6 mm2 Copper Wire. Make: Finolex/Polycab/V-Gaurd/havells/ CSR 2023-24. VOL-6, PART-III, SRP 5 of 105, 2.3.5.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wi...

Medium Point above 3 mtr upto 6 mtr from tapping Point to out let via switch. CSR 2023-24. VOL-6, PART-III, SRP 5 of 105, 2.1.2.

Long Point above 6 mtr upto 10 mtr from tapping Point to out let via switch. CSR 2023-24. VOL-6, PART-III, SRP 5 of 105, 2.1.3.

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

6 Way galvanized metal box.CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.4.4.

10 - 12 Way galvanized metal box.CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.4.6.

16 Way galvanized metal box.CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.4.7.

18 Way galvanized metal box.CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.4.8.

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

6 Module. modular switch mounting polycarbonate plate. Make:Anchor/GM/ CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.5.4.

10 - 12 Module modular switch mounting polycarbonate plate. Make:Anchor/GM/. CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.5.6.

16 Module modular switch mounting polycarbonate plate. Make:Anchor/GM/ CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.5.7.

18 Module modular switch mounting polycarbonate plate. Make:Anchor/GM/ CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.5.8.

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 A One Way Switch. Make: Anchor /GM/CONA/ LISHA. CSR 2023-24. VOL-6, PART-I...

6 A Three Way Socket Modular type. Make: Anchor/GM/CONA/LISHA. CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.6.3.

Stepped Fan Regulator Two Module Modular type.Make: Anchor/GM/CONA/LISHA. CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.6.4.

16 A One Way Switch Modular type.Make: Anchor/GM/CONA/LISHA. CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.6.7.

6 A Bell Push Modular type.Make: Anchor/GM/CONA/LISHA. CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.6.8.

6 / 16 A Universal socket Modular type.Make: Anchor/GM/CONA/LISHA. CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.6.10.

R J 45/ I.O Socket Modular type.Make: Anchor/GM/CONA/LISHA. CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.6.12.

Supplying And fixing of 6 A electrical accessories on existing switch board. 6 A Bakelite Ceiling Rose. CSR 2023-24. VOL-6, PART-III, SRP 10 of 105, 3.14.5.

Supplying And fixing of 6 A electrical accessories on existing switch board.6 A Batten Holder. CSR 2023-24. VOL-6, PART-III, SRP 10 of 105, 3.14.7.

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing s...

do but 8 Way TP & N. Make:Legrand/Sneider/L&T/Havells. CSR 2023-24. vOL-6,srp 18 of 105. 5.19.13.

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

6 - 32 AMPS TPN MCB. Make: L&T/Legrand/Snieder/Havells. CSR 2023-24. VOL-6, PART-III, SRP 17 of 105, 5.18.7

50- 63 AMPS TPN MCB. Make: L&T/Legrand/Snieder/Havells. CSR 2023-24. VOL-6, PART-III, SRP 17 of 105, 5.18.9

Digging of Pit for providing GI Pipe type Earthing. In Hard Soil. CSR 2023-24. VOL-6, 11 KV Labour charges, SRP 43 of 81, 22-1.6.2.

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

Supplying and fixing of DANGER/NO ADMISSION/NO SMOKING board made out of MS sheet metal with two coats of non corrosive enameled paint. PWD Electrical S R 2010-11. SRP 68/12

Supplying and installation of RUBBER MAT 10mm ( 3 by 6). PWD Electrical S R 2010-11. SRP 68/13)

Supplying of 4' feet - LED PVC square Batten 22W with integrated LED tube22 high quality diffuser with life of 25000 burning hours and 70% lumen mentainance with CRI 80 Power input:220-240V at 50/60H...

Supply of recess mounting non integral type 1' X 1' 24 W luminaire comprising of pressure die cast/extruded alluminium houasing with spring loaded false ceiling clamps,Power LED's with CCT 6500 de...

Supply of recess mounting non integrated type LED down light 15-18 watt luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false celing clamps,LED of Power/COB w...

Supply of recess mounting non integral type 40-42 watts luminaire comprising of pressure die cast/extruded alluminium houasing with spring loaded false ceiling clamps,Power LED's with CCT 6500 degr...

Supplying of Ceiling fan with Capacitor rating as per guidelines of BEEE 5 Star rating and IS 374/79 and also comply with IS 1709/1984 with latest amendmdnet. Rated voltage 220 V / 50 Hz,Rated power i...

Supplying Wall mounting fan suitable to operate at single phase 230V A.C.Supply.400mm. Make:Bajaj/Usha/CG/Orient/Almonard/Khaitan CSR 2023-24,VOL-6, PART-III, SRP 30 of 105 / 6.5.2

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on230V 50Hz, AC Supply.Make: Crompton / Bajaj / Usha / Havel...

Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, requ...

Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0...

Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing a 5 amperes ceiling rose, necessar...

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire. CSR 2023-24,VOL-6, PAR...

Supplying and drawing UTP- CAT 6E LAN cable. BIS approved make CSR 2023-24, Volume-6, Part-III , SRP 36 of 105 / 8.1.

Supplying & fixing of switch mounting rack with power manager & Cable manager.18 U with 650mm depth.CSR 2023-24, Volume-6, Part-III , SRP 36 of 105 / 8.4.5

Supplying & fixing of Network switches. 48 port 10/1000 switch. CSR 2023-24, Volume-6, Part-III , SRP 36 of 105 / 8.9.4

Supplying & fixing of I/o Socket with back box.Single I/o. CSR 2023-24, Volume-6, Part-III , SRP 36 of 105 / 8.10.1

Supplying & fixingof 2mtr Cat 6 Patch cable. CSR 2023-24, Volume-6, Part-III , SRP 37 of 105 / 8.11.1

Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. CSR 2023-24, Volume-6, Part-I...

Releasing , Re-Installing & Commissioning of the existing UPS with batteries in the New office duly engaging Electricians & Helpers as per the direction. I)(a) Labour Rates for One Skilled Electricia...