WBWRDD EE AM BDN eNIT-33 (Sl No 01-03) NP 2025-26 (Sl No-02)

Repairing and re-winding of 17.5/20 HP, 3 phase, 415 volt Induction Motor for different RLI Schemes under Patuli (A-M) Sub Division under Burdwan (Agri-Mech) Division under Maintenance Programme in the District of Purbo Bardhaman. Please see the details in Sheet Rewinding

Please Enable Macros to View BoQ information

BoQ_Ver3.0

Tender Reference No : WBWRDD/EEAM/BDN/eNIT-33 (Sl. No. 01-03)/ NP / 2025-26, Sl No-02.

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

(a) Dismantling of different H.P 3 Phase 380-400 Volt 1440 RPM, 4/3 pole 50 cycle for induction motors, removing old burnt out coil from slots carefully, segregating all the parts, washing and cleaning the same thoroughly for verification of serviceable and unserviceable parts as per direction of E.I.C. (ii) for 17.5/20 HP 3 phase Induction Motor.

Rewinding with approved quality Super Enamel copper winding wire of standard guage as provided by motor manufacturer including slot insulation as per Indian Electrical Rules, shouldering the cable joints properly, taping with 660 V. Grade water proof tape, making new loop terminals heating and vernishing with 'E' class golden vernish (Jhonson & Nicolson make) so as to develop original rated rpm, supplying all necessary materials as mentioned above and reassemblying the motor.(b) 17.5 H.P 120 H.P 3 Phase, 415 votls, 50 Hz, 2/4 pole induction Motor.

(i) Supply of super enamelled dual coated copper wire conforming IS 13730, 1996, part 13 (16 swg to 22 swg) Required max. weight of super enamelled copper wire is given below: 1) Elmech/G.E.C(New) / Crompton/N.E.C/Kirloskar - 10.2kgs. 2) Bicco/ A.E.I -13.1 Kgs. 3) G.E.C (old) - 16.2 Kgs.

(ii) Labour charge for rewinding , soldering, heat varnishing, bearing changing, reassemling etc. including supply of all materials excluding bearing as mentioned above complete in all respect as per direction of E.I.C

Socketing with C.I socket at enlarged bearing housing of any type of 17.5 H.P / 20 H.P motor by oversizing the bearing housing by machine turning & suppling new socket of required size and fitting the same in bearing housing.

Labour charge for checking up the dynamic balance of the motor shaft for original allignment as per direction of E.I.C

Painting two coats of both inner & outer portion with best quality synthetic enamel paint (to be approved before use) including smoothing surface by sand paper for removing old paint as per EIC. (a) Motor

Testing of repaired motor by continuous 8 hours running on load as per direction of E.I.C.

Item wise total

Add GST @18% on all Items

Add Cess @1% on all Items.

Deduction towards dismantled burnt enamelled copper wire from induction motor on the basis of actual measurement to be retained by the agency. (Note in case of PVC insulated copper wire to arrive at net burnt weight 10% deduction will be made) NB: Contractors premium will be allowed in this item bill should be drawn deducting the actual measurement of burnt coli @Rs 351.00 per Kg.

Grand Total Rs.

Say Rs.

Two Lakh Twenty Four Thousand Eight Hundred & Thirty Five Only