SPECIAL REPAIR TO BLDG NO TWG/127,TWG/139 112 ENGR REGT, 190 MTN BDE MI ROOM TWG/220, AND SPECIAL REPAIR OF ONLINE UPS,FLOOD LIGHT, GARDEN LIGHT AND PATH LIGHT OF 190MTN BDE UNDER GE TAWANG

Amount

Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as Specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type B2 using 40 mm graded stone aggregate as in Plinth protection, even complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.00 Sq m each, complete all as Specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n.exceeding 1.50 Sqm, complete all as specified directed.

S&F II class HW plain solid straight chowkhats and frame wrought framed rebated on the soild rounded or chamfered put together with glue pinned at joints complete all as specified and directed

S & F for anodised alminium window and ventilator shutters fixed type without sash bar, aluminium section weighing 0.5 Kg/m including necessary joining cleats, glazing clips, bubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed

S&F 35mm thick, 2nd class HW plain framed panelled shutters (any number of panels) with panels of timber float on both side (feather edged) or of veneered panticle board medium density wood particle board with commercial face veneers, supplied and fitted to chowkhats complete all as specified and directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and directed.

M/L galvanized iron snap grid with powder coated section of size 24mmx38mmx0.7mm thick ‘T’ section and 25mmx25mmx0.35mm thick wall cleat of angle section and 4mm dia galvanized iron wire suspended with 4mm thick non AC board of Make : Zipro/ M/s EVEREST Industries Ltd of size 600mmx600mm and shall be fixed to galvanized iron snap grid of above section with mild steel screws as per manufacturer’s instructions including two coats of distemper oil emulsion over a coat of cement primer complete all as specified and as directed.

Materials and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling of timber boarding, any description, fixed in any position with nails complete all as specified and directed.

Fixing only 50mm thick seccond class hard wood boarding clean sawn complete all as specified and directed .

Dismantling plain or corrugated steel sheeting of any guage, thickness including nainital or similar pattern roof covering complete all as specified and directed.

Supply and fix pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F for 0.63mm galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

Fixing only galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washer (serviceble sheet obtained from dismentling shall be re-used) complete all as specified and directed.

M/L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coats of red oxide primer over 10cm in width or girth not otherwise described complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel on old steel surfaces of any description exceeding 10cm in width or girth including preparation of surfaces complete all as specified and directed.

Demolition of pre cost cement concrete article pre cost block walling built in cement motor including all quins, pillars etc complete all as specified and directed.

M & L for PCC (1:3:6) type C-1 using 20 mm graded stone aggt solid building block set in cement mortar 1:6, n exc 10 CM complete in walls complete all as specified and directed

M& L fot TMT bars 10mm dia and over, reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (anealed)not less than 0.90mm dia, complete all as specified and directed.

M & L for TMT bars 8 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (anealed)not less than 0.90mm dia, complete all as specified and directed.

M&L for 15mm thck rendering on fair face of brick/PCC wall block surfaces, finish the surface even and smooth without using extra cement in CM 1:6 complete all as specified and directed

M&L for 10mm thck rendering on fair face of brick/PCC wall block surfaces, finish the surface even and smooth without using extra cement in CM 1:4 complete all as specified and directed

M&L applying two coat of distemper oil emultion , white or tinted on new wall surface including preparetion of surface complete all as specified and directed.

Hacking out old broken glass(any thickness , size, quality or discription from wooden frame or stone , concrete or brick surrounds , glaze with putty or fixed with beads complete all as specified and directed.

S&F for 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed

M & L 25mm thick PCC (1:2:4) type B-1 (20mm graded aggregate) as in sub base finishing the surface even and rough to receive the topping layer complete all as specified and directed.

M & L screed bed or bedding layer of cement mortar (1:4) 15mm thick for laying floor finishers

M & L light shade vitrified ceramic tiles (square/rectangular) polished, area of each tiles exeeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc set and jointed in nea cement slurry and pointed in white or coloured cement of match complete all as specified and directed.

Dismantling of floor, hearth or wall tiling,including cement morter bedding (but not backing) removing, serviciable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18Sqm but not exceeding 0.36Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M & L for non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

Supply and fix mild steel butt hinges, medium weight, cold rolled 100 mm size complete all as specified and directed

Supply and fix mild steel butt hinges, medium weight, cold rolled 75 mm size complete all as specified and directed

Supply and fix aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and directed.

Supply and fix aluminium anodized barrel tower bolts of extruded section, 100 mm long all as specified and directed.

Supply and fix aluminium handles, cast type, anodized, 150 mm size all as specified and directed.

Supply and fix aluminium handles, cast type, anodized, 100mm size all as specified and directed.

S & F in vitreous china wash down water closet pan (pedastal pettern) white (excluding fixing bolts, flushing cistern & flush pipe) including down pipe, seat cover and flush pipe complete all as specified and directed

Supply and fix PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, fixed in repairs complete all as specified and directed.

S&F vitreous China wash basin, white, flat back, size 580x450mm Taps, waste, chain and plug and porcelein stopper butincluding cutting for aned pinning in ends of brackets or erecting stand complete all as specified and directed.

S 7 F pillar taps 15mm bore dia, cast copper alloy with capstan heads, chromium lated, screwed down high pressure, with or without lettered 'Hot' or Cold with long shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

S & F stop cock fancy type 15mm dia CP high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed

S & F CP grating round 140mm size of PTMT (Min weight 50 gms) complete all as specified and directed

S&F for 20mm outer Dia 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed

S & F PVC (SWR) pipe 75mm bore single socketed, in any length with rubbber ring joints, laid in trenches or floor complete all as specified and directed

M & L PVC (SWR) floor trap with grating including jointing with sovlent cement of 75mm dia complete all as specified and directed

S&F soap dish, viterous china white, appx size 160x160x90mm complete all as specified and directed

S&F for towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms complete all as specified and directed

S & F bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S & F solid PVC Door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified and directed

S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cment for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fittted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and directed

M & L for glazed ceramic tiles in vertical surface 300X650X7mm thick set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed

S & F of steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 add to any of the foregoing items if structural steel is painted one shop coat of Zin chromate primer paint (including preparation of surface) at conrtactor workshop before facrication complete all as specified and directed

Dismantling structural steel work including doors gates but excluding framed truss etc complete all as specified and directed

E/M Portion Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder,ceiling roses, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Taking down carefully by unscrewing from board/outlet boxes, fittings and fixture such as main switches & DBs of any size and any capacity complete all as specified and directed

M/L for point wiring with 2 single core FRLS/ HRFR PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including suitable size PVC casing & caping with teak wood boxes and 3mm thick plastic laminated sheet top cover for light/fan/socket controlled by one switch complet with 1.5 sqmm PVC insulated unsheathed multistandard copper conductor 1100 volts grade green colour for earth continuity all a specified and directed

All as per item No 61 here-in-before but for one 5 Amp socket outlet independent board complete all as specified and directed

All as per item No 61 here-in-before but for one 5 Amp socket outlet on the same board complete all as specified and directed

All as per item Ser No 61 above but for one 15 Amp socket outlet independent with 2 run of cable of size 4 sq mm and one run of 2.5 sq mm cable as earth continuity all as specified and directed

Supply and fixing for switch socket combination modular 1 way 16 amps 240 volts Make Havells all as specified and directed

Supply and fixing for switch modular 1 way 5 pin 6 Amp 240 volts Make Havells all as specified and directed

S&F for ceiliing rose three terminal surface type bakelite 65x50 mm all as specified and directed.

M&L 3 module surface mounted plastic boxes 5x3 Make Havells CP AHNXMIZX03 Or equivalent in Plazaj/Standard as specified and directed.

M&L 8 module surface mounted plastic boxes 5x3 Make Havells CP AHNXMIZX08 Or equivalent in Plazaj/Standard as specified and directed.

M&L cover plate suitable for fixing swtich socket 3M Make Havells CP AHZPZCWV03 Or equivalent in Plazaj/Standard as specified and directed.

M&L cover plate suitable for fixing swtich socket 8M Make Havells CP AHZPZCWV01 Or equivalent in Plazaj/Standard as specified and directed.

S&F Bldg security LED light fittings, 1x40W LED luminiaries Complete with all acessories and including connecting upwith twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ, 40mm light grade GI pipe with suitable clamps, nuts, bolts and all fitting accessories complete all as specified and directed.Make Havells Cat part No. ENDURAPEARLNEOSL40WLED757PASYTOPC & equivalent make specified.

Supply & fixing surface and wall mounted LED batten 20 watt extruded aluminium housing provided for efficient heat dissipation with as specified and directed. polycarbonate diffuser and integrated electronic driver with LED Lamp complete all as specified and directed. Make Havells ENDURALINEARNEOBS20WLED840SPCWH & equivalent make specified.

S&F LED light for batten holder, 1x10W LED luminiaries Complete with all acessories and including connecting upwith twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ, and all fitting accessories complete all as specified and directed.Make Havells Cat part No.LED Adore Lamp 10W B22 WW & equivalent make specified.

S & F lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendant fitting all as specified and directed make Havells as specified and directed.

S & F high efficiency asthetically designed LED flat panel 2'x2' (600x600x70mm) recess mounted which provides soft-light and glare free symetrical illumination of capacity 34 watts. Complete with all accessories such as Led driver and including wiring complete all as specified and directed. Make Havells Cat No. PLUTOSURFACE2x2PLS34WLED857S or equivalent in bajaj/Philips.

Supply and fix sheet metal enclosures for DBs (Double door type) when MCBs to be used 240 volts 12 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

Supply and fixing only MCB SP, 240V,6 to 32 Amps,10 KA complete all as specified and directed.

Supply and fixing MCB SPN 240V 63 Amps,10 KA complete all as specified and directed.

S & F XLPE insulated heavy duty electric cables with Aluminium conductor, 1100 volts grade, cross sectional area 2corex10SQMM along the wall/Earth. Complete all as specified. ( from LT panel to living sheltor Shed SPN DB as incoming).

M & L for Tubes 'Light grade" galvanised 40mm for cable protection. Complete all as specified and directed.

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized iron strip 32x6mm as earthing lead by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil, dismantling and taking out old earthing plate and necessary testing complete all as shown on electrical plate No 5 of SSR Part –I (2009).

Supply and fix path light 8 watt cone series acts as a imposing street furniture. The elegant yet minimalsitic design acts a silent observer and giving light, diffuser at the upper portion acts a beacon of path guidance in a landsacpe environment.including Laying XLPE Cable 2 Core 6 Sqmm with PVC Conduit complete all as specified and directed.Note:- Gap between path light not more than 6 Mtr including taking down Make:- Havells CP No CONEBL8WLED757PSYMTOPC or equivalent in Bajaj & CG

Supplying and fixing 1100 volts grade heavy duty cable with stranded coductor of size 6 core PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded broken stone aggregate as in mass concrete in coping of existing and new PCC/steel poles etc complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and n.exe 1.5 mtr depth including getting out all as specified and directed.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and directed.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

S&F MCB distrubution board,SPN 2 way single door, sheet steel,phosphatised,powder coated without bus-bar,neutral link,earth bar and din rail 240 V complete all as specified and directed.

Supplied & fixing rigid non-metallic PVC Conduit exclusive of boxes ( junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

Supply, install,testing and commissioning of Online UPS for 30 min back up single phase AC input 72 volts and out put 230V of capacity 3 KVA complete all as specified and directed including taking down.

Supply,install of battery for 2 KVA UPS of capacity 220 volts complete all as specified and directed . Make - Exide, Amron , luminous or equivalent

Sub main wiring alongwith earth wire with the size of 2 X 4 sqmm + 1 X 4sqmm earth wire of HRFR/FRLS PVC insulated copper conductor , single core cable in surface /recessed as required in and including PVC casing caping complete fixing on wall, roof and floor complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin, 5 or 6 Amp flush type universal Make Anchor, Cona Kay complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin, 15 or 16 Amp flush type universal Make Anchor, Cona Kay complete all as specified and directed.

Taking down of LED Floodlight safely from the heighmast post without damageing any part of highmast post, gear box and any other acessories complete all as specified and directed.

Taking Down of LED type single dome aviation obstruction light safely from the heighmast post without damageing any part of Highmast post, gear box and any other acessories complete all as specified and directed.

Supply & fix of LED floodlight type BJFL 160W LED complete all as specified and directed . Make - Bajaj, CG , Havells or equivalent

Supply & fix of LED type single dome aviation obstruction light complete all as specified and directed . Make - Bajaj(HSN/SAC Code-9405), CG , Havells or equivalent

Supply and fix post top lantern 45 watt design from the renaissanceera yet with a modern look using new generation technology in LED to enliven your outdoor areas in perfect synchronisation with fuctionality and aesthetics of capacity 45 watt including 50mm dia GI pipe not less than 1.5 m Length and two coat of paint complete all as specified and directed.Note :- Quoted rate shall be including making connection from control switch to light fitting Make:- BAJAJ CP NO BGCTW4LEDWW or equivalent in Havells & CG

M/S KESANG CONSTRUCTION

PARBIN SIDDIKI

M/S ARGI ENTERPRISES

M/S P D ENTERPRISES

M/S SHYAMAL SARMAH

M/S THONGDOK ASSOCIATES