REPAIR TO ROOF CEILING PLINTH PROTECTION, BRICK WORK, PLASTERING UNDER C2A, C2B, NHL AND OTHER COMPLEXES AND WELCOME MAINT OF INTERNAL ELECTRIFICATION AND OTHER E M RELATED MAINT SERVICES UNDER GE(EAST) MATHURA

Amount

Dismantling of AC corrugated sheets in roof covering including ridges, hips, valleys etc .

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws complete.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in cladding to wall etc, fixed with self tapping screws as specified.

Dismantling timber scantlings (framed work) exc 40 Sqcm in section, in any position.

M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240.

S&F MS flat iron wind ties for roof including all necessary drilling, bolting or riveting etc conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Dismantling of ceiling boards/lining of any type and any thickness including cover fillets and timber frame work complete.

Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge.

M&L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions

S&F Solid PVC Wall Lining and solid PVC Partition consisting of 4mm thick printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as approved by Engr-in-charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

M&L for PCC M-15 grade (Nominal mix) using 20mm graded stone aggregate as in Bed blocks, copings etc complete.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles

M&L for Brickwork with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified.

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Taking down cement plaster of any description including racking out joints, hacking for key, scrubbing down with water etc complete

M&L for rendering 10mm thick in CM 1:6 for other than fair faces of Brick work surface finishing the surface even and smooth without using extra cement.

M&L rendering 15mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of Chalk whitening complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level).

M & L for 50mm thick in PCC M-10 grade (Nominal mix) as in plinth protection surface finished even and smooth without using extra cement all as specified.

M&L 100 mm thick PCC M-7.5 grade (Nominal mix) (using 40mm graded stone aggregate as in sub base to floor.

M&L for Non skid coloured cermic ENDURA tiles n. exc. 0.11 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including15 mm thick screed bed in CM 1:4.

Surface exavation n exc 30 mm and deep averaging 15 cm deep getting out in soft/loose soil.

Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point

M&L for 75mm thick cement concrete M-7.5 grade (Nominal mix) using 40mm graded stone aggregate as in sub base floor.

M&L for sand filling under floors including consolidation for laying paver block.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade made with grey cement and pigment complete all as specified and directed.

M&L for Chequered cement concrete tiles (with white cement and pigment) 30cm x 30cm x 25mm thick rubber moulded glossey finish, set, jointed and pointed in neat cement slurry in floors over & including 20mm screed bedding in cement mortar 1:4 complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.

M&L for 18-20mm thick Machine cut Machine polished kota slab flooring laid over and including 20mm screed bedding in cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for 18-20mm thick Machine cut Machine polished kota stone slab as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and incl 10mm thick plaster in cement mortar 1:3 complete.

M&L for 18-20mm thick Granite (of any type) slab bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing including fixing with adhesive.

Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete as directed by Engr-in-Charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over & including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles in vertical surface 450x 300x 7mm thick set and jointed in skirting pointed neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering as in backing coat in CM 1:4 complete all as specified and as directed .

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over & including 15 mm thick screed bed in cement and sand mortar 1:4. complete all as specified and as directed.

All as per items No 40 but on vertical surfaces over and including 10mm thick rendering as in backing coats in CM 1:4 complete all as specified and as directed.

M&L Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of syntetic enamel paint over a coat of red oxide primer.

Dismantling brick/ cement concrete tiles any size etc incl existing roof treatment of any thickness.

Demolition of mud in roofs any thickness including plastering and in any position and leaping over roof terrace, removing the demolished material outside MD land and depositing where directed at a level n exc. 1.5 m above starting point, complete all as specified and as directed.

M&L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle, filling the cracks by crack filler, providing 25 thick polymer modified plaster in ratio 1: 10 (1part of polymer and 10 parts of cement) with solid contents not less than 30% over slab, applying priming coat of epoxy primer with resin and hardener with water dilution as per manufacturer instructions, applying 1st coat of solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater that equal to 105 with consumption of 0.61 Kg/Sqm and applying 2nd coat solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater that equal to 105 with consumption of 0.61 Kg/Sqm over 1st coat once it is dry Make :- Asian paints/Thermax or equivalent make as approved by GE.

M&L for 40mm average thick PCC M-15 grade (Nominal mix) using 12.5 mm grade store aggregate stone agg) in floors/padding finishing the surface even and smooth with out using extra cement.

Disconnecting existing tanks exc. 500 Ltr and n.exc. 1000 Ltr capacity setting aside lowering (if required) for repairs cleaning etc and hoisting if required, reconnecting and re fixing and wirting date of cleaning in thick white paint.

S&F 1000 ltr capacity Rotational moulded polythene triple layer water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of tanks all as specified and as directed by Engineer-in-Charge.

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Taking down carefully existing copper/aluminium point wiring (light/fan/sockets) complete with all accessories such as switches sockets, ceiling rose, wall bracket etc and removing dismantled material and making good disturbed surface of walls/floors etc matching with existing surface etc complete all as specified and directed by Engineer-in-Charge.

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall incl cutting & chases( making good all to the disturbed surfaces as per existing) including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour and including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc or sunk pressed steel terminal box 2mm thick including 3mm thick hylam sheet top cover for mounting of normal flush type switch/socket etc as directed complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge , as described below:-

One light point/exhaust fan point controlled by one switch switch 5 amp complete.

One 3 pin 5 Amps socket point controlled by one switch on same board.

One 3 pin 5 Amps socket point controlled by one switch on independent board.

One bell point controlled by one push button on independent board

One light point controlled by two 2-way switches

All as per item No. 51 above but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed FRLS copper conductor including 4Sqm mm PVC insulated & unsheathed FRLS copper conductor as earth wire and connected to earth dolly on independent board complete all as specified and as directed .

S& F modular type switch piano type, 6 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed by Engineer-in-Charge.

S& F modular type switch piano type, 6 Amp 240 Volt, AC (ISI Marked) two way etc complete all as specified and directed by Engineer-in-Charge.

S& F modular type switch piano type, 16 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed by Engineer-in-Charge.

S&F modular one socket outlet 5 Pin 5 Amp 230 volts AC complete all as specified.

S&F modular one socket outlet multipurpose 3 Pin 5 Amp and 6 Pin 15 Amp 230 volts AC complete all as specified.

S&F modular Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular bell push, 5 Amp, 230 V, AC including cover plate etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in replacement of unserviceable modular white cover plate of size 1 module with frame complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in replacement of unserviceable modular white cover plate of size 2 module with frame complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in replacement of unserviceable modular white cover plate of size 3 module with frame complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in replacement of unserviceable modular white cover plate of size 4 module with frame complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in replacement of unserviceable modular white cover plate of size 6 module with frame complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in replacement of unserviceable modular white cover plate of size 8 module with frame complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in replacement of unserviceable modular metal flush box of size 1/2 module with nut bolt etc in wall complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in replacement of unserviceable modular metal flush box of size 3 module with nut bolt etc in wall complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in replacement of unserviceable modular metal flush box of size 4 module with nut bolt etc in wall complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in replacement of unserviceable modular metal flush box of size 6/8 module with nut bolt etc in wall complete all as specified and directed by Engineer-in-charge.

Supply and Fixing switch piano flush type, 6 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing switch piano flush type, 6 Amp 240 Volt, AC (ISI Marked) two way etc complete all as specified and directed by Engineer-in-Charge.

S&F one socket flush type outlet 5 Pin 5 Amp, 230 volts AC complete all as specified.

S&F one switch & one socket flush type outlet 5 Pin 5 Amp, 230 volts AC complete all as specified.

S&F one socket flush type outlet 5 Pin 16 Amp, 230 volts AC complete all as specified.

S&F one switch flush type,16 Amp, 230 volts AC complete all as specified.

S&F one switch and one socket flush type outlet multipurpose 3 Pin 5 Amp and 6 Pin 15 Amp 230 volts AC complete all as specified.

S&F Ceiling fan regulator flush type electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed by Engineer-in-Charge.

S&F bell push, flush type 5 Amp, 230 V, AC etc complete all as specified and directed by Engineer-in-Charge.

S&F ceiling rose surface bakelite 65mm x 50mm, 2 to 3 terminals with back plate etc complete all as specified and directed by Engineer-in-Charge.

S&F Lamp holder of PVC / Polycarbonate type surface for CFL / bulb etc complete all as specified and directed by Engineer-in-Charge.

S&F call bell ding dong type, AC, 230 V etc complete all as specicied and directed by Engineer-in-Charge.

Supply and fixing in replacement of Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket, one single pole 20 Amps, 240V MCB complaints complete all as specified and directed

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting SPN, 4 way, 230 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting SPN, 8 way, 230 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting TPN, 4 way, 230 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.

S&F MCB TPN 100 Amps C curves MCB repturing capacity 10 KA etc complete all as specified and directed by Engineer-in-Charge.

S&F MCB TPN 63 Amps C curves MCB repturing capacity 10 KA etc complete all as specified and directed by Engineer-in-Charge.

S&F MCB TPN 40 Amps C curves MCB repturing capacity 10 KA etc complete all as specified and directed by Engineer-in-Charge.

S&F MCB SPN 63 amp c curves MCB repturing capacity 10 KA etc complete all as specified and directed by Engineer-in-Charge.

S&F MCB SPN 40 amp c curves MCB repturing capacity 10 KA etc complete all as specified and directed by Engineer-in-Charge.

S&F MCB 6 Amp to 32 Amp SP capacities 'C' series 10KA rupturing capacaity complete all as specified and directed.

Supply only 3 pin 15 Amps Plug Top 250 Volts heavy duty complete all as specified and as directed.

S&F in repairs of Sub main wiring with two single core cable PVC insulated unsheathed of copper multi strandard conductor cable of size 6sqmm, 1100 votls grade drawing through concealed PVC conduit 20 mm dia medium duty and including PVC insulated 6sqmm unsheathed multistranded FR-LS copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. Note:- Two runs of 6Sqmm cable, one run of 6Sqmm earth wire & 20mm PVC Conduit shall be measured as one unit length

S&F in repairs of Sub main two single core PVC copper conductor unsheathed wire multi stranded 6sqmm in existing PVC conduit pipe and including 6sqmm copper conductor single core wire connected by common earth all as specified. Note:- Two runs of 6Sqmm cable & one run of 6Sqmm earth wire shall be measured as one unit length

S&F in repairs of Sub main wiring with two single core cable PVC insulated unsheathed of copper multi strandard conductor FR-LS cable of size 4 sqmm, 1100 votls grade drawing through concealed PVC conduit 20 mm dia, medium duty and including PVC insulated 4sqmm unsheathed multistranded FR-LS copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. Note:- Two runs of 4Sqmm cable, one run of 4Sqmm earth wire & 20mm PVC Conduit shall be measured as one unit length

S&F in repairs of Sub main two single core PVC copper conductor unsheathed wire multi stranded 4sqmm in existing PVC conduit pipe and including 4sqmm copper conductor single core wire connected by common earth all as specified. Note :- Two runs of 4Sqmm cable & one run of 4Sqmm earth wire shall be measured as one unit length

S&F in repairs of Sub main two single core PVC copper conductor unsheathed wire multi stranded 2.5 sqmm in concealed PVC conduit pipe 20 mm dia, medium grade and including 2.5 sqmm copper conductor single core wire connected by common earth all as specified. Note :- Two runs of 2.5 Sqmm cable, one run of 2.5 Sqmm earth wire & 20mm PVC Conduit shall be measured as one unit length.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.

Supply and Fixing LED batton fitting 1 x20 Watt, 6000K, 4 feet complete fitting connection with 2 core flexible cable 23/0.00076 from ceiling rose to tube fitting connection etc complete all as specified and directed by Engineer-in-charge. Make:- Cat part No LHEXBLP7PN1W020 of Havells or equivalent in Phillips/Bajaj/Crompton

S&F mini LED light fitting 9 W ,6000K indoor domestic mirror light luminarire with poly carbonate cover complete with all acessories and driver including connections with with twin core wire of suitable size all as specified. Make:- Cat part No LHEXBLP7IN1W009 of Havells or equivalent in Phillips/Bajaj/Crompton

S&F LED light fitting, 1X30 watt,5700 K complete with tuff net glass protection IP:66, fixed to walls with GI bracket made out of suitable size of medium grade pipe 32 mm dia tubing upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of 25x3 mm MS flat iron with suitable bolt and nuts and testing etc complete all as specified and directed by Engineer-in-charge. Make:- Cat Part No PUBO506026 of Polycab or equivalent in Bajaj/Crompton/Phillips/Havells

Supply and fixing LED decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base complete all as specified and directed by Engineer-in-charge. Make:- Cat Part No LHFOECE1TZ1O014 of Havells or equivalent in Crompton/Bajaj/Phillips

M&L for taking down carefully ceiling fan of any make, size, capacity from its position, dismantling complete fan, examine complete parts thoroughly, oiling, greasing on all parts and complete overhauling of fan including replacement of small parts such as split pin, nuts, bolts, screws and reassembling complete fan and make fully functional, re-fixing the fan in position including replacement of three core copper wire of suitable size from fan motor to ceiling rose complete all as directed by Engr-in-Charge. Note - (i). Cost of taking down carefully fans from existing position after disconnecting electric connections, sealing cable ends, bringing to MES store yard (If required for repair), is deemed to be included in this item quoted rates. (ii) Cost of fixing of major items like ball bearing, capacitors, etc shall be deemed to be included under this item. (iii) Major item such as ball bearing, capacitors, down rod etc shall be measured as supply only under item No 105.01 to 107.00 of this BOQ.

Supply only capacitors 2.15/2.5 MFD suitable for all types of fans complete all as directed. Make: - Usha, Universal, Epcos.

Supply only capacitors 3.15/4.0 MFD suitable for all types of fans complete all as directed. Make: - Usha, Universal, Epcos.

Supply only ball bearing suitable for ceiling fan/exhaust fan of any type as required including proper alignment of shaft and testing for following sizes:

Supply only down rod MS grade 15 mm bore of length not more than 45 cm suitable for ceiling fans of any type and size including cutting, drilling holes, making trhread and painting complete all as directed. Make- Jindal/TATA.

-ditto- all as per item No 103 above but exhaust fan of any make, size and type complete .

M&L for Rewinding of ceiling fan motor of any type, any size,and make with approved quality of super enamelled copper wire as per original gauge and size including varnishing heating etc complee all as directed.

M&L for Rewinding of Exhaust fan of size upto 350 mm motor of any type, any size,and make with approved quality of super enamelled copper wire as per original gauge and size including varnishing heating etc complee all as directed.

S&F in repair of new Exhaust fan 380 mm of sweep, metal body,gery colour complete with louvers complete all as specified and directed.

S&F in repair of new Exhaust fan 300 mm of sweep, made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding,gery colour complete all as specified and directed.

Supply and Fixing in replacement of unserviceable/broken Bakelite hylum sheet of size (8"X10") with suitable screwetc complete.

Supply and Fixing in replacement of unserviceable/broken Bakelite hylum sheet of size (7"X4"). with suitable screwetc complete.

Supply and Fixing in replacement of unserviceable/broken Bakelite hylum sheet of size (10"X12") with suitable screwetc complete.

Supply and Fixing in replacement of unserviceable/broken Bakelite hylum sheet of size (4"X4") with suitable screwetc complete.

Supply and Fixing in replacement wall mounted indoor Voltage Stabilizer automatic operation single phase, naturally air cooled and designed for input variation between 90 V to 300 Volt with output voltage stabilized at 230 V with accuracy of +1% suitable for 02 Ton Air conditioner of capacity 5 KVA all as directed. Make V- Guard as per model VEW 500 PLUS or equivalent in GODREJ/AE.

M/S PREETI CONSTRUCTION

Deepak Saxena