CERTAIN REPAIRS TO SEWAGE SYSTEM, FENCING, DRAINS, BOUNDARY WALLS INCLUDING GATES AT DLRL UNDER AGE B/R -III SECUNDERABAD

Amount

Cleaning of septic tank of 10 to 25 users by removing sludge/waste material (night soil) inside the manhole, washing with water and disposing off sludge/waste material from site in a hygienic manner outside MD land complete all as directed. .

Cleaning of septic tank of 50 to 100 users by removing sludge/waste material (night soil) inside the manhole, washing with water and disposing off sludge/waste material from site in a hygienic manner outside MD land complete all as directed.

Cleaning of septic tank of 200 to 1000 users by removing sludge/waste material (night soil) inside the manhole, washing with water and disposing off sludge/waste material from site in a hygienic manner outside MD land complete all as directed.

Mechanically pumping out sewage water from Septic tanks/sump well where required and as directed with taking precautionary measurers including tools & plants as required and removing to place out side MOD land from the site complete(working in foul condition) complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from sevice water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs and from mouths of circulating pipes,Date of cleaning to be written in synthetic enamel paint on all tank, after cleaning, size of letters shall be 50mm in height and text shall be “TANK CLEANED ON DD/MM/YYYY etc complete all as directed.

Cleaning and removing all scale and dirt etc from sevice water tank of capacity exceeding 1000 ltrs but not exceeding 2000 ltrs and from mouths of circulating pipes,Date of cleaning to be written in synthetic enamel paint on all tank, after cleaning, size of letters shall be 50mm in height and text shall be “TANK CLEANED ON DD/MM/YYYY etc complete all as directed.

Cleaning surfaces of RCC and AC sheet roofing RCC chajjah , sides of parapet walls by uprooting the unwanted vegetation and scrapping with steel wire brush ,watering and sweeping including taking down the leonine trees over roofs and removing the derbis to a distance exc 250m and n.exc.,500m complete all as directed

Excavation in trenches, in soft/loose soil, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out complete all as directed.

M&L for 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including taking out existing old existing pipe complete all as directed

M&L for cement concrete bed 1:3:6 type C2 to drain pipe 150 mm bore including packing under and hunching against the sides of pipes after they laid and tested including demolition of old concrete and removing debris outside of MOD land complete all as directed.

Returning, filling in, including spreading leveling watering and well ramming in layers not exceeding 25cm thick using soil complete all as directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as directed.

M&L for Cleaning of all blockage of any type of sewage line i.e, branch sewer line, main sewer line etc., by rodding and cleaning/desludging of manholes of any section and depth mechanically using super jetting machine or by suitable means as ordered and making the sewage line functional, cleaning the trap,water closet,soil, waste/vent pipe,gully traps upto final drop out let into first manhole/septic tanks and removing the sludge/foreign material and depositing the same outside the MOD land complete all as directed by Engr-in-Charge. Tentative quantities required to be cleaned per month shall be as under:- (a) 100mm bore sewage line -15Metre (b) 150mm bore sewage line -25Metre (c) 200mm bore sewage line -30 metre (d) Manholes of any size - 20 Nos (e) Trap/water closet -75 Nos The above mentioned quantities may be varied at the descretion of Engineer- in -charge as per requirement and nothing extra shall be claimed on this account. Note :- (i) Adequate precautions and safely measures shall be taken while working under foul conditions and cost for the same shall be deemed to be included in the quoted rate.(ii) Contractor or his representative shall collect the complaints from complaint cell in job cards (as per specimen attached as Annex ‘A’) from the concerned JE on all days and the complaint shall be attended & rectified by the contractor on priority depending on the nature & urgency of complaint.The job card shall be returned to JE on completion of the complaint and duly signed by the User/Occupant . If the contractor or his representative fail to collect the complaints from the complaint cell on daily basis, a penal recovery of Rs.2500/day shall be recovered from the RAR/bill due to contractor.

M&L for factory made precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) manholes or cover slabs including necessary form work and reinforcement, inculding demolition of existing reinforced cement concrete cover slabs complete all as directed.

M & L for Brick work with fly ash sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius, built in CM 1:4 including demolition of existing old brick masonry complete all as directed.

Taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces and finished even and smooth without using extra cement complete all as directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as directed.

M & L for preparation of old plastered surfaces of wall and applying two coats of exterior emulsion paint of Apex ultima make complete all as directed.

M&L for preparation of old painted steel/iron surafces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L for PU coated machine pressed precast concrete paver block of approved tint, shape and size confirming to IS 15658-2006 of 60 mm thickness M-30 Grade, as in floors/pavings laid over 40 mm thick sand cushioning layer including dismantling existing floor tile of any descrption complete all as specified. Make : NAVEEN/SPARTEK/NITCO

M&L PU coated machine pressed cement concrete tiles 30cm x 30cm x20 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 20mm thick screed or bedding layer in CM 1:6, including dismantling existing floor tile of any descrption complete all as directed. Make : NAVEEN/SPARTEK/NITCO

M&L for 20mm thick polished granite stone (of any type) work (table rubbed and polished) in steps, jambs,dados, pillars, window cills, cooking platforms and like etc. including making suitable holes for tucking in oval shape WHB in the granite slab including cutting grooves and nosing, tin oxide polish to top and edges, 15mm thick screed bed in CM 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including taking down old granite stone along with screed bed complete all as directed.

S&F PVC (SWR) pipes,150 bore of pipe, single socketed, in any length with rubber ring joints, fixed as in rain water pipes /spouts etc including making necessary holes in walls or parapet and making good with cement mortar 1:4 and taking down old rain water pipe of any description and in any position complete all as specified and directed.

S&F in repairs 150mm PVC (SWR) bends any radius complete all as directed

M&L for white rotational moulded triple layered polyethene water storage tank (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs including dismantling existing damaged PVC tank complete all as directed.

M&L for white rotational moulded triple layered polyethene water storage tank (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs including dismantling existing damaged PVC tank complete all as directed.

S&F in repairs ball brass valves of 20 mm dia, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as directed.

S & F in repairs ball brass valves of 25 mm dia, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as directed.

S & F in repairs 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as directed.

S & F in repairs 25 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as directed.

Taking up or down steel tubing and connections and supply and fixing 15mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

Taking up or down steel tubing and connections and supply and fixing 20mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

Taking up or down steel tubing and connections and supply and fixing 25mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed.

S&F in repair stop valve / angle cock fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified.

S&F in repair push type angle cock fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified.

S&F in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe complete all as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long complete all as directed

S&F in repairs 32mm dia PVC flexible waste pipe of length exceeding 60cm but not exceeding 90cm with connector suitable to connect the pipes with waste fitting/ coupling of WHB/ sink/ urinal complete all as specified.

S&F in repairs vitreous china wash basin, white, flat back, size 550 X 400 mm incl 32 mm dia PTMT waste coupling, PVC waste pipe incl brackets complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) (EWC), white including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and fixing bolts complete all as specified.

S&F in repairs vitreous china squatting pan "orissa" pattern of size 580x440mm white with integral foot rest including provision of P or S trap including connection to flushing pipe and making good to floor complete all as specified. Note :- Demolition of tiles/concrete required and concreting required for setting trap and making good to floor level shall be deemed to included in the quoted rate

S&F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as directed

S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as directed

S&F in repairs plastic water closet seat, white/colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devise complete all as directed.

S&F in repairs Vitreous China urinal, half stall type of size 46x30x71 cm, coloured complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1`:2 , securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including CP brass urinal spreader and CP connection of suitable length as per manufacturer,s instructions including necessary connection to flush pipe and 32 mm dia waste pipe complete all as specified and directed. Make :Cat part No 96010 of Hindware or equivalent in Parryware

S&F in repairs Urinal sensor of ivory colour complete all as directed. Make:- Hindware cat No 6007 or equivalent.

S&F in repairs venetian blinds (vertical type) of 100mm wide straps with all fittings (to be matched with existing pattern) complete all as directed.

Dismantling of wrought iron or mild steel work of any description not ohterwise provided for complete all as specified and directed.

S&F mild steel works as in posts, horns and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.

S&F in repairs, galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain-ing bolts,including,securing or trying at crossings with and provisionsof galvanised mild steel wire, staples or steel pins, etc,. as directed ( each line wire to be measured) complete all as specified.

S&F in repairs Chain link MS galvanisd fencing, any size or type fixed with posts or struts with wire staples etc complete in position all as specified and directed.

S&F in repairs welded steel wire fabric any size or type weight nexc 4 kg/sqm fixed to steel members, with wire staples incl provision of of mild steel (annealed) binding wire etc complete in position all as specified and directed.

S&F Razor concertina coil, 610mm dia (50 spirals per coil), weight 8kg approximately (±5%), expandable 6-8 metre, consisting of 2.6mm dia heavy galvanised high tensile spring steel wire as per IS-4454, complete all as specified and directed.

M&L Preparation of new steel and iron surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repairs Multicolor double layered black out fabric roller zebra blinds horizontal type including hanging mechanism water resistant, UV protection for window etc fixed complete all as directed. Make: Vista/Levador/Amar

S&F vitrified tiles 10mm thick light shade (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in flooring set and jointed in neat cement slurry and pointed in coloured cement to match with existing floor over and including 20mm thick screed bed in cement mortar (1:6), including dismantling of old floor tile along with screed bed complete all as directed.

All as per ser item No. 60 here-in-before but on vertical surfaces such as skirting over 10 mm thick backing coat in CM 1:4 on fair faces of brick/concrete surfaces including dismantling old wall tiles along with backing coat complete all as directed.

S&F framed work as in doors or gate of angle or other section with gussest plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastenfing and fixing complete of quality grade B.complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-1 (using 20mm graded crusshed stone aggregate) as in surface channel / drain including demolition of existing cement concrete in drains complete all as specified and directed.

M&L Extra for forming fair finished drain channel 30cm inner girth in cement concrete using extra cement including forms / mould, mitred / stopped ends etc complete all as specified and directed.

M&L for walling of squared rubble, brought upto courses, built in CM 1:4 including demolition of existing old stone masonry complete all as specified and directed.

M&L raised pointing in CM 1:4 to square, random or polygonal rubble, uncoursed or brought up to courses complete all as specified and directed.

M&L for broken glass coping on top of walls in CM 1:3 complete all as specified and directed.

Raking out joints /pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar and M&L raised pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought up to courses complete all as specified and directed.

Raking out joints /pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar and M&L flush pointing in CM 1:4 to random or polygonal rubble,uncoursed or brought up to courses complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wood/steel frame including punching or drilling out old glazing pins/spring clips and supply and fixing 5.50 mm thick plain sheet glass and glazing with oil putty in squares exc 0.50 Sqm in each pane complete all as directed. Make : Modiguard/ saint Gobain

S&F 12 mm thick toughened plain glass as in roof extension/projection including necessary rubber neoprene packing and fixing with old aluminium snap beadings and screws, fixed in position complete in all respect incl taking down broken glass of any description and in any position complete all as specified. Make : Modiguard/ saint Gobain

S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/wall cladding etc, fixed with self tapping screws including taking down old sheeting of any description complete all as specified

M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165de E-165 complete all as specified.

M&L Non-skid coloured matt finish ceramic tiles 7 to 8 mm thick (square /rectangular ) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floor etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over a screed bed 20 mm thick in CM 1:6 incl dismantling old tiles complete all as specified and directed.

M&L Glazed ceramic coloured tiles as in vertical surfaces 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm th backing coat of cement mortar 1:4 incl dismantling old tiles all as specified and directed.

M&L providing plain cement concrete 1:2:4 type B-0, (using 12.50 mm graded stone aggregate) as in roof padding finshed even and smooth using extra cement mixed with SBR latex emulsion @ 4% by weight of cement and applying evenly a coat of hot air blown bitumen of grade 85/25 at the rate of 1.2 kg per sqm including demolition of old concrete complete all as directed. Note: The work shall be carried out in three storeyed building and necassary scaffolding and T&P shall be deemed to be inclusive in rates quoted by contractor.

M&L for dholpur stone with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20mm), about 40mm high, 75mm deep in straight courses, laid and jointed in cement and sand mortar 1:3, recess pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1including demolition of old stone complete all as specified.

S&F galvanised round strands twisted steel, flexible wire rope of 8 mm dia having tensile strength 1770 N/mm sq. as per IS:2266 (2002) or tensile strength 1420 N/mm sq as per IS:2365 (2001) with clamps and nuts and bolts for fixing with MS frame as in roof projections including taking down of old damaged MS rope complete all as specified.

S&F 4mm thick aluminium composite panel (ACP) cladding metallic finish in combination of copper and steel grey sheets matching with existing colour of ACP cladding and frame work with section size using 50x25x2mm thick aluminium sections and joints sealed with exterior grade silicon sealant all as per manufacturer instruction fixed to walls including taking down of old damaged cladding of any description complete all as specified. Make:- Euroboard, Wonder Alu Board Altrong, Aludecor, Alucobond, Alstone

PAVAN ENTERPRISES

SM CONSTRUCTIONS

SRI SAI ENTERPRISES

M/s ANUSHA ENTERPRISES