Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹25.5 LAccepted-AOC RAWALPORA WANABAL PATI YAYIL POST OFFICE SANAT NAGAR SRINAGAR 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | L-1 | Accepted-AOC Being L-1. | |
| 2 | L-2₹26.9 L+₹1.5 L (5.77%)Rejected-Finance | L-2 | Rejected-Finance Not being L-1. | |
| 3 | L-3₹28.0 L+₹2.6 L (10.1%)Rejected-Finance 01 NEW MATTAN ADDA ANANTNAG ANANTHNAG JAMMU KASHMIR 192101 | ANANTNAG | JAMMU AND KASHMIR | 192101 | L-3 | Rejected-Finance Not being L-1. | |
| 4 | L-4₹28.7 L+₹3.2 L (12.6%)Rejected-Finance | L-4 | Rejected-Finance Not being L-1. |
Tender Value
₹29.3 L
EMD Value
₹58,580
Closing Date
4 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 861 EWS
GE 861 EWS c/o 56 APO
PROVN OF BLAST WALL AND WEAK SECTION FOR BLDGS IN DEPOT AREA UNDER GE 861 EWS
2024_MES_670616_1
GE 861 EWS-45/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE 861 EWS
As per Tender Documents
7 documents required · 7 mandatory
₹500
Yes
GE 861 EWS
₹58,580
Yes
16 Nov 2024
3 Sept 2024
11 Oct 2024
3 Sept 2024
4 Oct 2024
20 Sept 2024
Amount
Excavation over areas n exc. 1.5 m deep and getting out in any type of soil Complete all as specified and directed
Excavation over area exc. 1.5 m deep but n.exc 3.00 m depth and getting out in any type of soil Complete all as specified and directed
M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete Complete all as specified and directed
M&L for form work to sides of concrete foundation footings bases of column, sides & soffits of foundation and similar work vertical or to batter Complete all as specified and directed
M&L for RCC M-30 Design Mix using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs and mass concrete Complete all as specified and directed
M&L for form work to faces of wall retaining walls, abutment parapets & similar work vertical or to batter (fair finished surfaces) Complete all as specified and directed
M&L for RCC M-30 Design Mix using 20 mm graded crushed stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses Complete all as specified and directed
Returning filling in, including spreading levelling, watering & well ramming in layers n exc 25 CM with any type of soil Complete all as specified and directed
Removing excavated material exc. 250 m and n.exc 500 mtr and depositing where directed Complete all as specified and directed
Demolition of Brickwork or stone/boulder masonry built in cement mortar or cement lime mortar Complete all as specified and directed
M&L for 6mm thick asbestos cement plain building boards, fixed to framework with screws Complete all as specified and directed
M&L for 05 mm thick cement plaster in CM (1:4) to brick work or concrete surfaces and finishing the surface even and smooth without using extra cement and applying two coats of cement base paint over a coat of alkali resistant primer including preparation of new surfaces complete all as specified and directed
M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90mm dia (quality confirming to TMT Fe 500D) Complete all as specified and directed
M&L for mild steel framed work as in doors or gates of angle and other sections with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering in doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, fastening and fixing complete, steel conforming to Fe-410-W(Gde-E-250) quality 'A' complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
M/S Manzoor Constructions (BID ID -3116718)
Asian Marketing Co (BID ID -3128016)
JANDOO AND CO (BID ID -3116801)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .