8671 SPL REPIAR TO VERTICAL SHAFT TOILET BLOCK OF BOTH SIDE BUIDING NO P-90 OF 450 PERSONAL LINE AT AFMC UNDER GE (CENTRAL) PUNE

Dismantling of stone slab or tiles in any description or thickness, laid bedded jointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and directed.

M&L for cleaning the sunken portion of toilet/bath/WC/kitchen throughly to remove laitance, dirt, dust, etc. and including forming angle fillet of size 40 mmx40 mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit" Pidicrete URP" or eqvt) complete all as specified and directed.

M&L for sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit bathseal tape" and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit bathseal Grout" or eqvt. nahani traps, etc to be fitted securely and the gaps around it to be grouted in the same manner complete all as specified and directed.

M&L for applying acrylic cementitious polymer modified elastrometric waterproofing and protective coating like 'Brushbond' of Fosroc or 'Pidifin 2K' of Pidilite of equivalant in Dr. Fixit on sunken floor as per manufacturer's instructions including 15 mm thick rendering on fair faces of concrete surfaces in cement mortar 1:4 mixed with water proofing compound/liquid complete all as specified and directed. NOTE: (a) water proofing compound /liquid shall be measured and paid at supply only rates seperately. (b) After completion waterproofing coating suncken floor filled with water for 7 days for testing all directed by Egr-In-Charge.

M&L for concrete screed M-15 type B0 mixed with intergral WPC (Liquid) laid to slope 1:60 towards outer face of wall water proofing compound @ 200ml per bag of cement 50 mm thick complete all as specified and directed.

M&L for PCC 1:5:10 type E2 as in filling under floor complete all as specified and directed.

M&L for colored joint free non skid ceramic tiles or matt finish tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in White or colored cement to match, including 15 mm thick screed bed or bedded layer in cement mortar 1:6 for laying floor finish complete all as specified and directed.

M&L for colored glazed ceramic tiles (Matt finish) (600mm x300mm)x7 to 8mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in White or colored cement to match including 10 mm thick backing coat in cement mortar (1:4) on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing to receive /fixing dado/ skirting tile complete all as specified and directed.

M&L for telephonic Black 18mm to 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platfoms and like in cement mortar (1:4) including pointing in White cement (1:2) using marble dust with admixture of pigment to match with shade of Granite complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.

Taking down cement plaster on stone/brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces (1:6) finished the surface even and smooth without extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4), the surface even and smooth without extra cement complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat alkali resistent primer to newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for finishing walls with acrylic smooth exterior paint of required hade : new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) area n. exc 1.5 Sqm removing from site complete all as specified and directed.

Taking down shutter of any description and removing frome site exc. 1 Sqm & n. exc. 2 Sqm each leaf complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm long SS hinges complete all as specified and directed.

S&F 150 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply and fix 150mm long extruded Aluminium alloy handles, 150mm long fabricated type, anodised complete all as specified and directed.

S&F 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.

M&L for two coat of synthetic enamel painting to wooden surfaces over a coat of Pink primer incl preparation of wooden surface, surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and directed.

S&F powder coated anodised Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply & fix in repair stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless Steel wire staples complete all as specified and directed.

S&F stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless Steel wire staples complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), White with P or S trap with and including plastic water closet seat cover connection to trap, flushing pipe & anti-syphonage pipe and 10 litrs flush tank etc including necessary materials for fittings & making good to floor complete all as specified and directed.

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580x440 mm White, with integral foot rests complete all as specified and directed.

S&F oval shaped vitreous China, under/over counter WHB, snow White, fancy type of overall size 560x470 mm fixed in repairs including 15 mm pillar cock cast copper alloy CP, CP fancy type 15mm bore cast copper stop valve/ange cock, 32 mm brass CP waste fitting & waste pipe & 15 mm PVC connection pipe 450 mm long complete all as specified and directed.

Supply and fix in repairs vitreous China bowl urinal flat back, size of 465x355x265 mm White (minimum), with grating and union (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed including 15mm bore CP, Brass, urinal spreder complete all as specified and directed.

S&F for stop cock/angle cock copper alloy CP screwed down high pressure with crutch or butterfly handle screwed both ends for Iron/pipe or for union and fixed 15 mm bore in repairs complete all as specified and directed.

S&F 15mm bore, CP, bib taps cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed down, screwed for Iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F in repairs CP health faucet spray with 1.5m long pipe with wall hook & fixed in repair complete all as specified and directed.

Supply and fix in repairs bib taps two way type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for Iron pipe or for brass ferrule 15 mm bore and fixed and CP health faucet spray with 1.5m long pipe with wall hook complete all as specified and directed.

Supply and fix swan neck, 15mm bore piller taps of cast copper with capstan head CP screwed down high pressure with or without lettered hot and cold with long screwed shank and fly nut for Iron pipe and fixed in repairs complete all as specified and directed.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for Iron pipe and fixed complete all as specified and directed.

Supply and fix in repairs brass chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to Steel pipe or union complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts to length 450 mm in repairs complete all as specified and directed.

S&F Brass, chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Taking down Steel tubing/CPVC/UPVC pipes and connections including cleaning for re-fixing or removal to store of 15 mm bore complete all as specified and directed.

Supplying and laying 15mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all required fittings including cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on brick/stone masonary surfaces complete all as specified and directed.

Taking down Steel tubing necessary fittings connection etc for 20 mm bore pipe complete all as specified and directed.

S&F 20mm dia, UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type of pipe complete all as specified and directed.

Supplying and laying 32 mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all required fittings including cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on brick/stone masonary surfaces complete all as specified and directed.

S&F for flush valve concealed push type(single flush) 32mm dia with square flush tank lever copper alloy CP screwed down high pressure with crutch or butterfly handle screwed both ends for Iron/pipe or for union complete all as specified and directed.

Supply and fix PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement 75 mm dia out let including taking down of old trap & making good the disturbed surface with PCC 1:2:4 or CM (1:3) and SS grating of any type complete all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces and ceiling applying two coats of oil bond distemper over one or two coats of putty including one coat of primer complete all as specified & directed.

M&L for complete reomval of existing treatment and finishing walls with acrylic smooth exterior paint of required hade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed.

Dismantling water tanks & removing from site, capacity of tanks 500 ltr and n exc 1000 ltr complete all as specified & directed.

S&F rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position all as specified in SSR Pt-I, exc 1000 ltr capacity including 20mm dia PTMT Float valve complete all as specified & directed.

S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm dia including holding brackets etc complete all as specified & directed.

S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm dia including holding brackets etc complete all as specified & directed.

S&F PVC (SWR) bends with access door of 110 mm dia, any radius complete all as specified & directed.

S&F PVC(SWR) bends with access door of 75 mm dia, any radius complete all as specified & directed.

S&F PVC (SWR) branch piece double (double 'Y') equal or unequal 110mm dia with door access complete all as specified & directed.

S&F PVC (SWR) branch piece double (double 'Y') equal or unequal 75mm dia with door access complete all as specified & directed.

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc complete all as specified & directed.

S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified & directed.

S&F PVC (SWR) bends of 75mm dia, any radius complete all as specified & directed.

S&F PVC (SWR) vent cowl, 100 mm dia complete all as specified & directed.

S&F mild Steel framed work such as grills, framed guard bars etc and similar work confirming to Fe-290, grade E-165 complete all as specified & directed.

M&L for two coat of synthetic enamel paint on Steel surfaces over one coat of zinc primer including preparation of new Steel surfaces exceeding 10 cm width or girth complete all as specified & directed.

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring aluminium/Copper from existing place i.e. light, fan, socket or power points complete with any type of unserviceable fittings such as switches, sockets, bell push, ceiling rose, pendants, holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar or plaster of Paris and to match/finish new surface as the existing surface either by using same colour distemper, putti or White/colour wash all as required and directed.

M&L for point wiring for one light/exhaust fan/ceiling fan/one bell/buzzer point controlled by one switch.with necessary fixing arrangements with PVC-FRLS-H insulated and unsheathed Copper multistranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic PVC conduit medium grade ISI marked not less than 20 mm dia/PVC casing & caping not less then (20x12) mm including all accessories/fittings such as junction boxes, bends, tee, elbow etc alongwith required size Modular boxes including modular frame/cover plate suitable for mounting switches/sockets etc including PVC-FRLSH insulated and unsheathed Copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous Earthing including cutting the chases and making good the surface by cement mortar and for matching/finishing of new surfaces either by means of plaster of paris/putti or distemper/colour wash with same existing colour surfaces complete all as specified and directed.

All as per srl item no 70 above but for one switch socket outlet point 3 pin 5 Amps on independent board.

All as per srl item no 70 above but for point wiring complete with 2 run of 2.5 sqmm single core PVC FRLS-H insulated heavy duty ISI Marked, unsheathed cable 1100 volts grade with multistranded Copper conductor along with one run of 2.5 sqmm single core PVC FRLS-H insulated heavy duty for Earth continuity conductor and connected to common Earth dolly complete all as specified and directed.

Taking down old unserviceable/worn out sub main wiring of any type and size complete all as specified and directed.

Taking down Earth plug/DBs of any make and type including MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

Taking down fan/exhaust fan/wall fan any sweep any type and size, keeping with safe custody and refixing the same with replacement of 3 core PVC insulated PVC sheated 3 core multistranded Copper conductor cable of appropriate size as specified/directed, from ceiling rose to fan terminal, including replacing capacitor of suitable capacity, ceiling fan suspension rubber hook insulator complete with its clips, nut, bolt, washers and quarter pin, over hauling the fan complete all as specified and as directed and painting of ceiling fans complete, in site with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

M&L for sub main wiring with two single core PVC FRLS-H insulated unsheathed Copper conductor cable 2.5 sqmm drawing in and including non mataliv conduit/PVC casing & casing of suitable size on wall/surface on ceiling with one additional PVC wire of Copper conductor of 2.5 sqmm for Earth continuity conductor complete all as specified and directed. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 2.5 Sqmm conductor and one run of PVC conduit/casing caping shall be measured as one unit length.)

Material and labour for disconnecting from the electric mains and taking down opening and inspection of storage type water heater of size 25ltrs/50 Ltrs capacity and descaling with dilute hydrochloric acid, checking for water tightness of the inner tank, cable continuity, thermostat of setting at 70 degree C checking fusible plug, base assembly, stop cock including replacement of indicator lamp, rubber PVC gasket washers reassembling, refixing and reconnection the electric connections at old place and replacing unserviceable bolts and nuts, cementing work including hydraulic pressure testing with hard operated hydraulic pump complete after repair including spray painting of one coat with DUCO paint of approved make after preparation of surface complete all as specified and directed. Note : Any labour charges for replacing the unsv spares, disconnection and reconnection of water and electric connections shall be deemed to be included in unit rate quoted for this items .

M&L for sub main wiring complete with two single core 6 sqmm and one core of 6 sqmm Earth wire, 1100volts FRLS-H grade, PVC insulated, stranded Copper conductor cable with continuous Copper Earth conductor in and including PVC conduit/casing caping including accessaries complete all as specified and directed. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 6 Sqmm conductor and one run of PVC conduit/casing caping shall be measured as one unit length.)

S&F in replacement of LED 18/20 Watt light fitting baton integrated LED channel, integral sleek extruded polycarbonate LED channel with White acrylic cover and including connecting up with twin core twisted flexible Copper conductor cable with suitable size with all accessories complete all as specified and directed.

M&L for core drilling in brick or stone masonry walls up to 18 inches thick to form holes of 2 to 4 inches diameter, using suitable core cutting machinery and equipment complete all as specified and directed. Note: The contractor shall provide all necessary materials, labour, tools and eqpt for completing the work. The contractor shall ensure that the drilling operation is carried out without causing any damage to the surrounding structure. Any scaffolding, ladders, or additional support arrangements required for safe execution of the work shall be provided by the contractor.

S&F in replacement of LED light fitting surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete in all respect of 10W capacity complete all as specified and directed.

S&F in replacement ceiling rose ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F in replacement modular switch 6A SP one - way 230V White ivory finish complete all as specified and directed.

S&F in replacement modular switch 16A SP one - way 230V White ivory finish complete all as specified and directed.

S&F in replacement modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops complete all as specified and directed.

S&F in replacement modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops complete all as specified and directed.

S&F SPN distribution box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type Copper bus bar, Din rail, Earth bar of 8 way complete all as specified and directed.

S&F in replacement of MCB SPN, 40 to 63 Amps 240 volts, AC, 10 KA breaking capacity 'C' Series, "ISI marked complete all as specified and directed.

S&F in replacement of MCB SP, 06 to 63 Amps 240 volts, AC, 10 KA breaking capacity 'C' Series, "ISI marked complete all as specified and directed.

M&L as in replacement for Earthing with galvanized Steel Earth plate electrode 600x600x6.0 mm thick buried directly in ground (Earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized Iron wire 4 mm dia (8 SWG) as Earthing Lead protected by GI pipe medium grade 15 mm bore for protection of GI Earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal/coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mmx300 mmx300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electrical plate No. 3 of SSR Part-I and testing of Earth resistance as required complete all as specified and directed. Note : Earthing Lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).