Constt of Community Hall at Panchayat Parnalla Block Billawar under B2V3

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres In all kinds of soil.

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:5:10 (1 cement: 5 coarse sand: 10 garded stone ) 40 mm nominal size.

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:3:6(1 cement:3 coarse sand:6 garded stone ) 20 mm nominal size.

Brick work witk common burnt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6(1 cement: 6 coarse sand).

Extra for brick work withj common burnt clay bricks in super structure above plinth level up to floor five level.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors , roofs havingslpoes up tp 15degree landing balconies shelves, chajjas ,lintels,bands,plain window sills , stair cases and spiral stair cases up to five level including curing but excluding the cost of centring, shuttering , finishing and reinforcement with 1:1.5:3(1 cement:1.5 coarse sand:3garded stone )20 mm nominal size.

Steel reinforcement for R.C.C. work including starighting, cutting, bending , placing in position and binding all complete.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Filling available exacvated earth ( excluding rock) in trenches , plinth, sides of foundation etc not exceeding 20 cm in depth , consloidation each deposited layer by ramming and watering lead up to 50 m and lift up to 1.5 m

Supplying and filling in plinth with fine sand under floors including watering , ramming , consolidating and dressing complete

Centring and shuttermg including strutting, propping etc. and removal of formwork for·

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs , landing , balconies and access platfarm

Columns, pillars, piers, abutments, posts and struts

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Edges of slabs and breaks in floors and walls Under 20 cm wide

Providing wood work in frame of doors, windows,clerestory windows and other frames rot framed and fixed in position with hold fast lugsare with dash fasteners of required dia and length ( hold fast lugs are dash fastener shall be paid for seperately) using SAL WOOD.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) 2nd class deodar wood (30 mm thick).

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for pannelled or panelled and glazed shutters 25 mm to 40 mm thick. 12 mm thick Marine plywood conforming to IS: 710.

Providing and fixing 30 mm thick panelled or panelled and wire gauge shutters for doors, windows and clerestory windows including black enamelled M.S. but hinges with necessary screws excluding, panelling which will be paid for separately using 2nd class deodar wood.

Providing & fixing wooden moulded beading to door and windows frames with iron screws 50x12mm 2nd class deodar wood

Providing & fixing of float glass panes 4 mm thick glass pane (weight not less than 10 kg / sqm)

Providing & fixing in position M.S. grills of required pattern in frames of windows etc with flats, sq. or round bars etc incl priming coat all complete. Fixed to openings / wooded frames with rawl plugs, screws etc.

Providing & fixing 40x5 mm iron hold fast 40 cm long including fixing to frame withj 10 dia bolts nuts and wooden plungs & embedding in cement concrete block 30x10x15 cm (1:3:6 cement concrete)max size of aggregate 20 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing ISI marked oxidized casements stays with necessary screws etc. complete:

Providing & fixing alminium hanging floor door stopper ISI marked anodized ( anodic coating not less than grade 10 as per ISI 1868) transparent or dyed to required colour & shade twin rubber stopper

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand).

12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Distempering with oil bound washable distemper of approved brand & manfacture to give even shade on new work two or more coats over and including priming coat with water thinable cement primer

Finishing walls with waterproofing cement paint of required shade on new work (two or more coats with water thinable cement )

Painting with synthetic enamel paint of approved brand and manfacture to give even shade on new work

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:2:4 (1 cement:2 coarse sand:4 graded stone ) 20 mm nominal size.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete of size 600mmx600mm. (Double Charge)

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete of size 600mmx600mm. (Double Charge)

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded stone agg.) 20 mm nominal size over 75 mm bed of dry brick blast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Wiring light points / fan point /exhaust point with 1.5 sqm mm frlv PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with paino type switch ,phenolic ,laminated sheet ,suitable size MS box and earthing the point with 1.5 Sqm FRLS PVC insulated copper conductor single core cable etc.

Wiring for light / power plug with 2x4 sqm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class pvc conduit along with 1 no 4 sqm FLRS `PVC insulated copper conductor single core cable loop earthing as required

Wiring for circuit/ sub main wiring along with earth wiring with the following sizes of FLRS PVC insulated copper conductor single core cable in surface /recessed medium class Pvc conduit as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Refer CPWD DSR E&M 2018 Item No. 1.24).

5/6 A switch (1.24.1)

5/6 A socket 3 pin

Supply and fixing folowwing way single pole neutral steel sheet MCB distribution 240 v on surface/ recess complete with tinned copper bus bar earth war din bar interconnection powder painted including earthing etc as required 6 way double door

Supply of LED batten 9 watt.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Poviding and fixing Ceiling Fan 1400 mm Sweep including regulator. (Havells or equivalent)

Providing and fixing of 4 mm dia copper wire on surface or in recess for loop earthing not existing surface / recessed conduit /sub main wiring cables as required

Providing and fixing of GI fittings & clamp including cutting & making the walls etc internal work exposed on wall

15 mm dia bore

20 mm dia bore

Providing and fixing of GI union including cutting & making the thread and long screws etc complete new work

15 mm dia bore

20 mm dia bore

Providing & fixing white vitrous china washbashin with CI / MS bracket /15 mm CP brass pillar trap 32 mm CP brass waste standard pattern including painting with all fittings and brackets complete including & making good the walls & floors whereever white viterous china size (630x450mm) with pairs of 15 mm CP brass pillar trap required (make cera or equivalent)

Providing & fixing white vitrous china pedestal type water closet (european type wc pan ) with seat lid 10 litre low level pipe with manually controlled device conforming to IS 7231 with all fittings and brackets complete including & making good the walls & floors whereever required (make cera or equivalent)

Providing & fixing of CP brass bib cock of approved quality 15 mm nominal bore complete job (make jaguar /cera /equivalent)

Long Nose

Short Nose

Providing & fixing CP brass angle valve for basin mixer or gyser points of approved make conforming to IS 8931 15 mm nominal bore complete job

Providing & fixing 110 mm dia PVC water waste water / sewerage pipe of 4 kg pressure per sqm of supreme/prince/finolex/ parkash surya make.

Providing & fixing in position complete PVC floor trap of supreme / prince make 110/75 dia

Providing and fixing PVC bend 110 mm dia

Providing and fixing waste pipes for sink or washbasin including Pvc waste fittings complete flexible pipe 32 mm dia

Providing & fixing plain Pvc soil waste pipe & vent pipe 75 mm dia

Providing & fixing unplasticised PVC connection pipes with brass union 30 cm long 15 mm nominal bore

Providing & fixing 8 mm CP/SS jet with flexible tube upto 1 mts long with SS triangular plate eropean type wc of app quality & make as desired by enginner in charge

Providing and fixing of Motar pump of 1/2 hp of sharp bajaj or equivalent make including fittings complete

Providing and placing on tarrace floor level polythene water storage tank IS 12701 marked indicating the bis no with cover & suitable locking arrangements and making the necessary holesfor inlet & outlet overflow pipes including fittings & the base part for tanks sintex electroplastic ,star ,lotous or equivalent having ISI make.

Providing and fixing CIB of approved size by way of making foundation in M10, Brickwork in 1:6 cement mortar including plastering with 1:4 cement mortar, painting and writings as per the directions of engineer-in-charge including all carriages , supply , complete job.

CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking for an average lead

Fine and coarse Sand by MT= 5 km

Crushed Stone aggregate below 40 mm nominal size MT= 15KM

Brick from an av lead of 90 km MT

DEVINDER SINGH

RAJESH SINGH

M/S SANJEEV KUMAR & CO