Construction of Retaining wall at Balaji Avenue 3rd street and Balaji avenue East street end in ward No.3

Earth work excavation and deposting on bank with an intial lead of 10m& initial liftm of 2m in hard siff clay , stiff black cotton , hard red earth shales , murram , gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil asper standard specification 20.B including refilling charges

Plain cement concrete of mix 1:4:8 using 40mm ISS metal from the apporoved quarry including cost and convence of the materials to site and all the labour charges etc, complete as per the standard specification

Providing steel centering for sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with props, With all cost and conveyance of materials and labour at site etc ., Complete as per standard specfication.

Providing and laying in position standardized concrete Mix M-20 Grade (design mix) in accordance with IS 456-2000 using 20mm and below graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3cum), 5156kg of 10 – 12mm machine crushed stone jelly and with about (4.79cum) 7670kg of Q.dust, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers – The Coarse and Fine aggregates to be used should comply with the requirements of IS Standards.

Supplying , fabricating and placing in position of MS or RTS bar for reinforcement to all R.C.C works as per the design given including cost of steel and binding wire also in all floors

Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5(one part of cement and five crushed stone sand) including curing neat finishing, etc,. Complying with std specification

plain cement concrete 1:5 (one part of cement, and five parts of plastering sand (P-Sand), three coarse aggregates) using 12mm thick in all floors including cost and conveyance of all materials to site and labour charges etc., complete as per standard specification

Painting two coats for exterior surface with approved exterior plastic emulsion paint approved quality and colour over a priming coat,including thorough scrapping, clean removal of dirt, etc,. Complete and including nicessary plaster of paris, putty, wherever required etc,. complete as per standard specification