SPECIAL REPAIR TO OMQs AT 1 WING AF STATION SRINAGAR

Amount

Taking down Shutters of any description exc 1 Sqm and not exc 2 Sqm each, etc complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sqm complete all as specified and directed. Note: The damaged portion of the tiles/rendering shall be made good with the same material to match with the adjacent surface.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n exc 4 Sqm each complete all as specified and directed. Note: The damaged portion of the tiles/rendering shall be made good with the same material to match with the adjacent surface.

Refixing of Shutters after easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws, etc of any description n.exc 1 sq. m each in same opening complete all as specified and directed.

Refixing of Shutters after easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws, etc of any description exc 1 sq. m and n exc 2 sq. m each in same opening, complete all as specified and directed.

Material and Labour for pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of Chowkats complete all as specified and as directed.

Supply and Fixing Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, in second class hardwood complete all as specified and directed.

Material and Labour for MS works as in holdfast, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging holdfasts, Grills, cladding and similar small articles conforming to Fe 290 Gde E-165 in repairs, complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B1 using 20mm graded stone aggregate as for holdfasts, etc including necessary formwork, complete all as specified and directed.

Supply and Fixing Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass/gauze etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); in second class hardwood, Complete all as specified and directed.

Supply and Fixing Plain, framed, panelled shutters (any number of panels), 35mm thick with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; in second class hardwood, Complete all as specified and directed

Supply and Fixing solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening complete all as specified and directed.

Material and Labour for factory made PVC cupboard shutter flush type of 22 mm thick consisting of panel of hollow PVC profile section of 12 mm thickness consisting of M S frame made out of MS tubes of 19 gauge thickness and size of 12 mm x 12 mm inserted all around the hollow profile section and insert one 12 mm x 12 mm MS tube in the centre of this section and lipped with 10 mm (5 mm x 2) thick and 12 mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof, water proof and fire retardant printed PVC sheet using solvent cement on both the sides of the panel. The front side of the panel visible in the front of the cupboard to be edge bonded using 20 mm x 1 mm thick PVC leaping on both the edges with locking arrangements of both panel etc complete all as specified and as directed.

Material and Labour for factory made PVC shelf of 22mm thickness consisting of panel of hollow PVC profile of 12mm thickness consisting of M S frame made out of M S tubes of 19 gauge thickness and size of 12mmx12mm inserted all around the hollow profile section and insert one 12mmx12mm M S tube in the center of this section and lipped with 10mm(5mmx2)th and 12mm wide on stiles and rails using solvent cement.The inner panel shall be laminated with 5mm th termite proof water proof and fire retardent plan PVC sheet using solvent cement on both the sides of panel.The front side of the partition visible in the front of the cupboard to be edge bonded using 20mmx1mm thick plain PVC Leeping on both edges etc. complete all as specified and directed.

Material and Labour for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be filled in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site complete all as specified and directed.

Supply and Fixing Aluminium alloy, anodised, sliding door bolt 300mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

Supply and Fixing 150 mm long Aluminium anodised,handle ofmextruded section fabricated type anodised and fixed complete all as specified and directed.

Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm size of extruded section, complete all as specified and directed

Supply & Fix 125 mm long Aluminium anodised,handle of extruded section fabricated type anodised and fixed complete all as specified and directed.

Supply and Fixing Aluminium, anodised, barrel tower bolts 125mm size of extruded section, complete all as specified and directed.

Supply and Fixing Butt hinges, medium weight, cold rolled mild steel 100mm size, complete all as specified and directed.

Supply and Fixing Butt hinges, medium weight, cold rolled mild steel 75mm size, complete all as specified and directed .

Supply and Fixing sheet glass 3mm thick, ordinary quality and glazing with oil putty/wooden beads in square or rectangular in section n exc 0.5 sq.m in each pane complete all as specified and directed

Material and Labour for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack or galvanised wire staples or fixed with nails and wooden beads, complete all as specified and directed

Supply and fixing Figured Glass pin head type 4mm thick n exc 0.5 Sqm and glazing with oil putty, Complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and directed

Material and Labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Material and Labour for cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish to a distance not exc. 50m complete all as specified and directed

Supply and fixing factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. complete all as specified and directed

All as per Srl item No 29 above but steel ventilators top/side hung.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Material and Labour for 12mm thick Gypsum Board tiles of size 600 x 600 mm decorative finish fixed to frame work in ceiling. The frame work shall consist of powder coated GI E-grid. system 600 x 600 mm with main runner 24 x 38 x 0.7 mm, cross tee 24 x 36 x 0.7 mm and wall angle 25 x 25 x 0.4 mm, ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fasteners or from purlin of the roof with butterfly clips, hold down clips etc. as per manufacturer's instructions and complete all as specified & directed by the Engineer-in-Charge.

Material and Labour for 6mm thick non-asbestos fibre cement building board fixed to frame work in ceiling. The frame work shall consist of powder coated GI E-grid. system 600 x 600 mm with main runner 24 x 38 x 0.4 mm, cross tee 24 x 36 x 0.4 mm and wall angle 25 x 25 x 0.4 mm, ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fasteners or from purlin of the roof with butterfly clips, hold down clips etc. as per manufacturer's instructions and complete all as specified & directed by the Engineer-in-Charge.

Material and Labour for preparation of new or previouly untreated plaster/ AC sheet surfaces of ceiling including cornices and applying two coats of oil bound distemper colour/tint complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge in roof coverings complete all as specified and directed

Supply and Fixing 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws., complete all as specified and directed.

Supply and Fixing 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Material and Labour for preparation of new or previously untreated steel and iron surfaces and applying two coat of synthetic enamel paint of any description over 10cm width or girth over a coat of red oxide primer complete all as specified and directed

Supply and Fixing in repair mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete 300mm length, complete all as specified and directed

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for, Complete all as specified and directed

Material and Labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface; not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed.

Material and Labour for RCC, Type B1 1:2:4 (20 mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Material and Labour for MS TMT bars 6mm to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed

Supply and Fixing Hasp & Staple, 125mm size, safety type aluminium anodised with mild steel hinge pin including bolt, to hinge plate and fixed with screws, complete all as specified and directed

Supply and Fixing brass knobs 35-40mm dia, complete all as specified and directed

Supply and Fixing Drawer brass handles, projecting drop (50 mm to 65mm) on screwed plate complete all as specified and directed

Supply and Fixing140MM Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed

Supply and Fixing in repair drapery rod 25mm dia fency type mild steel plastic coated inculding wooden funnel and wooden brackets, Complete all as specified and directed by

Material and Labour for preparation of new or previously untreated wood and wood based surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed

Material and Labour for tightening bolts and closing bolt holes, etc.to rectify the leakage/ seepage, in old roof of corrugated steel sheets by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts if required, all set in stiff white lead Complete all as specified and directed

Dismantling of Stone slabs and tiles of any description or thickness in floors aprons etc laid in cement mortar of any thickness, complete all as specified and directed

Material and Labour for granite (of any type) work (table rubbed and polished) 20mm thick as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cm 1:4, complete all as specified and directed

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed

Material and Labour for Screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed

Material and Labour for Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed

Material and Labour for non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing surfaces, Complete all as specified and directed .Make: RAK/Somany/Kajaria

Material and Labour for double charged Vitrified coloured tiles 7-10mm thick dark shad (Square/ Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.Make: RAK/Somany/Kajaria

Material and Labour for glazed ceramic (digital glossy finish) coloured tiles 450x300x7 mm thick on vertical surfaces, alongwith highlighter tiles set and jointed in neat cement slurry and pointed in white/colour cement to match the existing surfaces, Complete all as specified and directed .Make: RAK/Somany/Kajaria

Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness, Complete all as specified and directed

Material and Labour for 25 mm thick PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) in sub base of floorings Complete all as specified and directed

Material and Labour for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in hard standing/pavings/plinth protections, finished even and smooth without using extra cement, Complete all as specified and directed

Material and Labour for Machine pressed, glossy finished 25 mm thick coloured cement concrete chequered tiles of size 300mm x 300 mm of pattern as approved set jointed and pointed in neat cement slurry in floors complete all as specified and directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. Complete all as specified and directed

Material and Labour for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, Complete all as specified and directed

All as per ser item No 65 here-in above but except bricks

Material and Labour for brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 Complete all as specified and directed

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Material and Labour for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed.

Material and Labour for Rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed.

Material and Labour for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed.

Material and Labour for rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement, complete all as specified and directed.

Material and Labour for preparing new plastered surfaces and applying two coats of distemper oil emulsion including Thin layer of wall care putty and priming coat preparatory to distempering on surfaces of wall, , complete all as specified and directed.

Material and Labour for preparing new plastered surfaces and applying two coats of distemper oil emulsion including chalk whitening preparatory to distempering on surfaces of ceilings, complete all as specified and directed.

Material and Labour for preparation of new plastered surfaces of walls and applying two coats of weather paint (Apex) paint colour and tint as ordered in any pattern over and including thin layer of wall care putty and one coat of primer upto 15 metres height including sides and soffits of the beams, fascias, parapets etc, complete all as specified and directed.

Taking up or down steel water tubing 15mm bore and connection including cleaning for refixing or removal to store complete all as specified and directed.

Supply and Fixing GI tubes 15 mm bore 'medium grade' with all fittings and fixed complete to walls and ceilings or laid in trenches complete all as specified and directed.

Taking up or down steel water tubing 20mm bore and connection including cleaning for refixing or removal to store complete 20 mm bore complete all as specified and directed.

Supply and Fixing Steel water tubing galvenised 20mm bore medium grade with all fittings and fixed to walls, ceiling or laid in floor complete all as specified and directed.

Material and Labour for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum confirming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed

Supply and Fixing in repairs vitreous china ware wash hand basin white flat back, size 630x450 mm including brackets complete all as specified and directed .

Supply and Fixing in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed .

Supply and Fixing in repair PVC waste pipe flexible for WHB of 32mm size complete all as specified and directed .

Supply and Fixing PVC cabinet mirror of size 450mmx600mm .Complete all as specified and directed.

Supply and Fixing in repair, Vitreous china squating pan, orissa pattern size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete Complete all as specified and directed.

Demolition of PCC of any description and in any position other than ground floor exc 15 cm thickness complete all as specified and directed.

Material and Labour for 15 mm thick rendering in CM 1:3 using 3% WPC as in sunken portion complete all as specified and directed.

Material and Labour for applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per square meter including cleaning surfaces.complete all as specified and directed.

Material and Labour for cement concrete type B1 1:2:4 using 20mm graded stone aggregate 25mm thick as in flooring with using 3% WPC etc.

Material and Labour for cement concrete (1:5:10) type E-2 (using 40mm Brick coarse aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Supply and Fixing 40 mm dia Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors For GI spout in Sunken floor.complete all as specified and directed.

Supply and Fixing in repairs wash down water closet (EWC) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed .

Supply and Fixing in repairs PVC valveless, syphonic action type, flushing cistern, low level 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply and Fixing in repair, Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs washers and waster including beeding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160mm Complete all as specified and directed

Supply and Fixing in repair, Kitchen plate rack made of stainless steel 1 mm thick with plugs washers as overall size of 75cm x 75 cm including fixing to wall and all assessaries Complete all as specified and directed

Supply and Fixing in repairs 15 mm bib tap CP, cast copper alloy with capstain head screwed down screwed for iron pipe or for brass ferrule fancy type, complete all as specified and directed . Make: Cera/Prayag/Jaquar

Supply and Fixing in repairs CP angle valve of cast copper alloy screwed down high pressure with capstain head screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and directed. Make: Cera/Prayag/Jaquar

Supply and Fixing in repairs CP shower roses with CP Arms, 15mm bore, complete all as specified and directed by Engineer-in-Charge. Make: Cera/Prayag/Jaquar

Supply and Fixing in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water fixed in repairs, complete all as specified and directed . Make: Cera/Prayag/Jaquar

Supply and Fixing in repair 15mm dia Brass CP Sink mixer (wall mounted) for mixing hot & cold water ,complete all as specified and directed . Make: Cera/Prayag/Jaquar

Supply and Fixing in repair 15mm dia Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water, complete all as specified and directed . Make: Cera/Prayag/Jaquar

Supply and Fixing in repair CP Jet Spray of Standard size for EWC alongwith CP connection pipe and all fittings as fixed Complete all as specified and directed. Make: Cera/Prayag/Jaquar

Supply and Fixing in repairs CP Health faucet fixed with spring action and lever along with health faucet long pvc/cp chain 1.2 mtr for supply of water fitted in the existing water connection in the toilets, complete all as specified and directed .

Supply and Fixing in repairs, chromium plated towel ring of minimum dia 200mm , complete all as specified and directed . Make: Cera/Prayag/Jaquar

Supply and Fixing in repairs corner glass shelf fixed of size 300x300mm Complete all as specified and directed . Make: Cera/Prayag/Jaquar

Supply and Fixing in repairs front glass shelf of required shape & size, Complete all as specified and directed Make: Cera/Prayag/Jaquar

Supply and Fixing tubular towel rail 600mm long of brass CP including brackets, fixed with chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and directed . Make: Cera/Prayag/Jaquar

Supply and Fixing in repairs, chromium plated steel grating of maximum dia 150mm Complete all as specified and directed by Engineer-in-Charge

Supply and Fixing in repairs, Toilet paper holder of brass CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed .

Supply and Fixing in repairs Soap dish, brass CP any type, fixed to plugs with chromium plated brass screws Complete all as specified and directed . Make: Cera/Prayag/Jaquar

Supply and Fixing in repairs, PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints laid in trenches, floors or fixed to wall, complete all as specified and directed .

Supply and Fixing in repairs, PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints laid in trenches, floors or fixed to wall complete all as specified and directed .

Supply and Fixing in repairs 75mm bore dia PVC floor trap(SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed

Supply and Fixing in repairs 75mm bore PVC(SWR) door bends any radius complete all as specified and directed

Supply and Fixing in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed .

Supply and Fixing in repairs 110 mm bore PVC(SWR) door bends any radius provided with access door complete all as specified and directed .

Supply and Fixing in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directed.

Supply and Fixing in repairs 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed

Material and Labour for complete removal of existing treatment of walls and applying thin layer of wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion (OBD) paint on walls complete all as specified and directed

Material and Labour for prepartion of old decorated plastered or unplastered surfaces of ceiling including filling of holes, cracks with cement wall putty making surface even and smooth and applying one coat of distemper oil emulsion paint (OBD) complete all as specified and directed

Supply and Fixing in repairs rotational moulded PVC water storage tank 500 ltr cap (cylindrical vertical with closed top) hoisted & fixed in position, complete all as specified and directed

Supply and Fixing in repairs rotational moulded PVC water storage tank 1000 ltr cap (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed

Material and Labour for preparation of old painted wooden surfaces of any description and applying one coat of synthetic enamel paint including preparation of old painted wood and wood based surfaces of any description and positions, exc 10cm width or girth complete all as specified and directed.

Material and Labour for preparation of old painted steel surfaces of any description and applying one coat of synthetic enamel paint including preparation of old painted steel and iron surfaces of any description exc 10cm width or girth complete all as specified and directed

Material and Labour for complete removal of existing treatment of old painted surfaces of walls and applying two coats of weather paint (Apex) paint colour and tint as ordered in any pattern over and including thin layer of wall care putty and one coat of primer upto 15 metres height including sides and soffits of the beams, fascias, parapets etc, complete all as specified and directed.

Material and Labour for pre-laminated particle board 18mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancig white lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply and Fixing of stainless steel Handle fancy type 100 mm size complete all as specified and directed.

Supply and fixing stainless steel hinge of size 60 mm self closing Italian patter suitable for cabinet and shelves opening / closing operation (fancy type) complete all as specified and directed

Material and Labour for PVC edge lipping, 3/4mm thick fixed with nails for 18/19 mm thick pre-laminated particle board & shutters & etc, complete all as specified and directed.

Supply and Fixing of Magnet of suitable size fixed for cabin leafs, drawers etc, complete all as specified and directed. Make : Royal or equivalent

Supply and Fixing stainless steel roller of size 25mm x 12mm, 450mm lenth with male female rolling brackets suitable for baskets complete all as specified and directed, Make : Evershine,Olive or equivalent

Supply and Fixing Stainless steel perforated cutlery basket of size 520mm width, 485mm depth and 100mm height complete all as specified and directed. Make : Evershine, Sleek or equivalent

Supply and Fixing Stainless steel Cup & Saucer basket of size 520mm width, 485mm depth and 100mm height complete all as specified and directed. Make : Evershine, Sleek or equivalent

Supply and Fixing Stainless steel designer Pull out detergent basket of size 100mm width, 485mm depth and 430mm height complete all as specified and directed. Make : Evershine, Sleek or equivalent

Supply and Fixing Stainless steel designer plain basket of size 520mm width, 485mm depth and 150mm height complete all as specified and directed. Make : Evershine, Sleek or equivalent

Supply and Fixing Stainless steel designer pull out basket of size 810mm width, 485mm depth and 200mm height complete all as specified and directed. Make : Evershine, Sleek or equivalent

Supply and Fixing Stainless steel designer Gas removal mesh of size 200mm width and 100mm height complete all as specified and directed. Make : Evershine, Sleek or equivalent

Material and Labour for second class hard wood plain fillets, square in section, clean sawn, secured with screws exc 13 & n. Exc 25 sq. cm complete all as specified and as directed.

Material and Labour for French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

Supply and Fixing 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

Taking down care fully copper/aluminium point wiring (light,fan,socket or power) complte including fixture & fittings such as switches,ceiling rose, pendents, regulators, sockets, light fittings any type and capacity etc complete and making good disturbed surfaces of wall/floor etc to match with the existing specification complete all as specified and as directed.

Material and Labour for Point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulator etc for the following :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

One light/fan point controlled by one way switch 6 amps 240 volts

One light point controlled by two way switch 6 amps 240 volts

One bell point controlled by one way switch 6 amps 240 volts

one 3 pin 6 Amps switch socket out let point on independent board

one 3 pin 6 Amps switch socket out let point on same board

Material and Labour for Point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets 16 Amps, 240 volts :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

Supply and Fixing modular one way switch 6 Amp 240 volt marked light/fan suitable for one model etc complete as specified and directed.Make- Legrand/ Anchor/ Havells .

Supply and Fixing modular two way switch 6 Amp 240 volte suitable for one model etc complete as specified and directed.Make- Legrand/ Anchor/ Havells.

Supply and Fixing Modular 6 Amp 5 pin universal socket suitable for two model , 250 volts complete all as specified and directed Make- Legrand/ Anchor/ Havells

Supply and Fixing modular switch one way 16 Amps 240 volts suitable for one model complete as specified and directed Make- Legrand/ Anchor/ Havells

Supply and Fixing Modular 6/16 Amp socket suitable for two model , 250 volts complete all as specified and directed Make- Legrand/ Anchor/ Havells

Supply and Fixing modular step type two model fan regulator suitable for 120 watt 250 volts complete as specified and directed b Make- Legrand/ Anchor/ Havells

Material and Labour for ceiling rose with three terminal as per relevant IS complete as specified and directed Make SSK/havells/legrand /Anchor

Supply and Fixing modular bell push switch with indicator 6 Amp 240 volte suitable for one model etc complete as specified and directed Make- Legrand/ Anchor/ Havells

Supply and Fixing bell electric AC, 230V, Single phase, Dingdong type complete all as specified and directed.Make- Legrand/ Anchor/ Havells

Supply and Fixing decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 20 watt luminaire complete all as specified and directed .Make:- CG C&S ,Havells ,Crompton

Supply and Fixing decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 10 watt luminaire complete all as specified and directed.Make:- CG C&S ,Havells ,Crompton

Supply and Fixing mirror light sleek LED mirror light provided with high output diffuser 10Watt with suitable capacity driver with all components as per manufacturer etc complete all as specified and directed .Make:- CG C&S ,Havells ,Crompton

Supply and Fixing surface mounted round type energy saving ceiling mounted decorative LED 8 watt luminair with opal diffuser for soft light with suitable driver etc complete all as specified and directed .Make:- CG C&S ,Havells ,Crompton

Supply and Fixing Energy saving new generation 10 W LED IP 65 bulkhead luminair with opal diffuser with 10 LED lamp etc complete all as specified and directed .Make:- CG C&S ,Havells ,Crompton

Supply and Fixing Decorative type lamp holder suitable for pin type LED 10 watt incl lampe etc complete all as specified and directed .Make:- CG C&S ,Havells ,Crompton

Disconnecting all water and electric connections of geysers and taking down carefully installed storage type electric geysers of any capacity of any make/type/size (horizontal/vertical) lowering and setting aside opening geysers examining and checking thoroughly for requisite repair/ replacement of defective/worn-out/ unserviceable components/parts materials including preparing inventory for each geyser separately in presence of Engineer-in-Charge and removing all scale and dirt de-scaling of deposited in inner copper tank and outer tank and heating elements by HCL or aqua clear pedilite solution, thermostat, indicator lamp, assemble checking electrical connection, stopping of minor leaking by soldering/brazing of the inner copper tank and replacement of defective worn out unserviceable components/parts and painting of geyser 50 ltrs after scraping, cleaning, knotting and stopping including preparation of surface of geyser and rubbing with ammery paper for painting with one coat of duco paint by spray painting mation to achieve glossy finish of approved make first quality and re write MES No. on the body of geyser with black synthetic enamel paint (letters and figures 2cm high ) & re-fixing geyser in its original location including hoisting, connecting to water & electric connection and testing for proper functioning of geysers including earthing to the entire satisfaction of the Engineer-in-Charge including the replacement of the following items etc complete all as specified & directed. (a) Supply only Fiber reinforced PVC nylon pipe heavy duty size 450 mm long 15mm bore with brass coupling chromium plated with rubber washers as both ends as per IS.-01 Nos (b) Supply only Flexible chromium plated connection pipe size 450 mm long 15 mm bore with brass chromium plates coupling suitable for geyser any capacity-01 Nos

Taking down carefully ceiling fan any type, sweep and make for overhauling including dismantling of blade frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts in its original location and hanging connecting and testing ceiling fan for smooth functioning incl replacement of rubber real insulator,split pin,nut,bolt, washer, 3 core flexible cable from connector to ceiling rose, and painting with one coat of synthetic enamel paint with spray painting machine & marking MES No. with black paint complete all as specified and directed

Taking down carefully exhaust fan any sweep and make, dismantling of blades, frame and opening and examining fan motor, cleaning of dust/.dirt of fan, cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively, including applying synthetic enamel paint to achieve glossy finish approved coloured as directed by Engineer-in-Charge and marking MES No with black paint and reassembling of complete fan and re-fixing in its original location making connection with replacement of rubber real insulator,split pin,nut,bolt, washer, 3 core flexible cable from connector to ceiling rose and testing to the entire satisfaction of Engineer-in-Charge complete all as specified and directed

Material and Labour for taking down unserviceable sub main wiring any size any location with all accessories etc complete as specified and directed

Material and Labour for Sub main wiring with PVC insulated FRLS cable LT 1100 Volts grade with stranded copper conductor and drawn into and including non metalic rigid medium grade PVC concealed counduit with all accessories alongwith one contineous earth wire and connected to comman earth dolly of size 2x10 sqmm (2 single run) with one contineous copper earthing lead wire of 10.0 sqmm etc complete all as specified & directed. Note: Two run of main wire and one run of earth wire along with PVC conduit shall be measured as unit length.

Material and Labour for Sub main wiring with PVC insulated FRLS cable LT 1100 Volts grade with stranded copper conductor and drawn into and including non metalic rigid medium grade PVC concealed counduit with all accessories alongwith one contineous earth wire and connected to comman earth dolly of size 2x6 sqmm (2single run) with one eontineous copper earthing lead wire of 6 sqmm etc complete all as specified & directed. Note: Two run of main wire and one run of earth wire along with PVC conduit shal be measured as unit lenth.

Disconnecting and taking down unserviceable DB with all accessories from existing position of any size, any capacity etc complete all as specified and directed

Material and Labour for epoxy powder coated or polystrene insulated material sheet metal enclosure, factory made (double door) 4 way VTPN suitable for MCCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush mounting complete all as specified and directed.

Material and Labour for epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 12 way SPN suitable for MCB DB's 230 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush mounting complete all as specified and directed.

Material and Labour for MCCB 3 pole 125 Amps 16 KA working on 415 Volts 50 HZ AC supply,complete all as specified and directed.

Material and Labour for MCB single pole 63 Amps 10 KA working on 240 Volts `C' curve 50 HZ AC supply, all as specified and directed.

Material and Labour for MCB SPN 63 Amps 10 KA working on 230 Volts `C' curve, 50 HZ AC supply, all as specified and directed.

Material and Labour for MCB SP 6A to 32A Amps 10 KA working on 230 Volts ,`C' curve, 50 HZ AC supply, all as specified and directed.

S&F safety AC power units with 25 Amp starter including 4 model plate, 25 A plug & socket, PVC box for mounting of power unit suitable for 25 Amp power unit and connection of electric supply and testing complete all as specified and directed.

Supply and Fixing meter box made out of 1.6mm thick ms sheet of size 45x30x20cm with front opening & locking arrangement incl painting with two coat of synthetic enamelled paint over a coat of red oxide incl taking down serviceable energy meter from existing position and fixing in ms box incl suitable size hole for incomming and out going cable etc complete all as specified and directed.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.25 mtr below normal ground level, connected to galvanized iron wire 4mm dia by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES Schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe , complete all as specified and directed.

M/S Abdul Ahad Rather

M/S TARIQ AHMAD SHEIKH

M/S FAROOQ AND SONS

M/S maqsood enterprises

M/S M.R. Construction

M/S Wani and Sons

M/S RATHER CONSTRUCTION CO

M/S MUBASHIR SHABIR WANI