Repairs/Renovation of Fire and Emergency Station Building at Qazigund Anantnag.

Amount

Earth work in excavation in all kinds of soil by mechanical means over areas (Exceeding 30 cm in depth, 1.5m in Width as well as 10 sqm on plan) including disposal of excavated earth lead up to 50 mtr, all lifts and disposed earth is to be levelled and neatly dressed. All kinds of soil

Providing and laying stone soling hand packed for foundation trenches including carriage of same from approved source up to site of work complete

Providing and laying in position cement concrete 1:4:8(1 Cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size crushed) excluding the cost of centring and shuttering. All work up to Plinth level, including cost and carriage of all material involved complete.

Providing and laying in Position cement concrete 1:2:4(1 Cement: 2 Coarse sand: 4 graded stone aggregate 20 mm nominal size crushed) all work upto plinth level excluding the cost of centring, shuttering, including cost and carriage of all materials involved complete

Providing and laying in Position reinforced cement concrete 1:1.5:3(1 Cement: 1.5 course sand: 3 graded stone aggregate 20 mm nominal size crushed) excluding the cost of centring, shuttering, all work up to plinth level finishing and reinforcement including cost and carriage of all materials involved complete.

Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete thermo mechanically treated bars including carriage involved complete.

Centring and Shuttering including strutting, propping etc. and removal of form work for

Foundations

Walls (Any Thickness)

Suspended Floors

Brick work with common burnt clay FPS(non modular) bricks of class designation 75 up to plinth level in cement mortor 1:6(1 cement : 6 coarse sand) including cost and carriage of all material complete.

Providing and Laying Damp Proof course (serving as coping) 50mm thick with cement concrete 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size crushed) Including cost and carriage of all material involved complete.

Providing/Fixing of Ornamental Iron gate made up of angles, MS flats,hollows etc of required size and Gauge including cutting, welding, Hoisting and fixing in position including locking arrangements, and stoppers, Handles applying a priming coat of approved steel primer and two or more coat of approved paint complete. As per direction of Engineer incharge at site

Providing/Applying 15 mm thick cement sand plaster in 1:6 mix complete job including carriage of all materials.

Providing and Fixing of 35mm thick wire gauze shutters using galvanized MS wire gauze of average width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws 1st class Kail wood including cost and carriage of all material involved complete

Providing and Fixing 35 mm thick panelled or panelled and glazed shutters for doors including ISI marked and M.S pressed butt hinges bright finished of required size with necessary screws all complete 1st class kail wood including cost and carriage of all material involved complete

Providing and Fixing 4mm thick glass panes including badings complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats) on new work over ready mixed grey or pink primer of approved brand and manufacture.

Finishing walls with water proofing cement paint of required shade, (One or more coats) including applying priming coat complete as per directions of Engineer Incharge at site.

Providing and Fixing 20mm thick wooden planks ceiling with necessary fittings, M.S.screws etc complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on old work(two or more coats)

Providing and laying/fixing ceramic glazed Wall tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except white, ivory, Grey, Fume Red, Brown laid on 20mm thick bed of Cement Mortar 1:4(1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc, complete. Including cost and carriage of all material complete.

Providing and laying/fixing ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except white, ivory, Grey, Fume Red, Brown laid on 20mm thick bed of Cement Mortar 1:4(1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc, complete. including cost and carriage of all material complete.

Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level P.V.C flushing cistern including flush pipe ( of approved make ) manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Long pan pattern white vitreous china W.C. pan of size 580 mm.

Providing/Fixing of Bib-Cock Long Body

Providing/Fixing of Bib-Cock Short Body

Providing/Fixing of Angle Value

Providing and Fixing Wash Basin with C.I/M.S (Brackets 15mm C.P Brass piler tapes, 32 mm C.P brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls where ever required White Victorious China Wash Basin Size 630x450 mm with a pair of 15mm C.P.Brass pilar taps

Gate Valve 20 mm size.

Providing and fixing mirror of superior glass of approved quality and of rectangular shape of size 600 x 450 mm white plastic moulded frame of approved make and shade with 6mm thick hard board backing

Hand Shower

Toilet Paper Holder

Providing and Fixing CP brass towel rail complete with CP brackets fixed to wooden cleats with CP brass screws (Jaquar or Equivalent as per Make list.

Providing and Fixing of PVC(prince make) following fittings including rubber washers, cutting walls and repairs where ever required as per direction of Engineer Incharge

Door Tee 100 mm size

PVC collar 100 mm

PVC collar 75 mm

PVC Reducer 100 mm x75mm

Floor Trap 100 mm size with

Plain Bend 100 mm

Plain Bend 75 mm

Door Bend 100 mm

Door Bend 75 mm

Cowl & Clif

Providing and Fixing PVC fittings (prince make) including all fittings etc where ever required complete.

100 mm size

75 mm size

Providing and Fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 15mm dia. nominal bore.

15 mm size

20 mm size

Providing and Fixing hot water geyser of Recold 50 ltr capacity with all fixtures complete job.

Construction of 9" thick brick masonary manholes in cement mortar (1:4) mix, foundation cement concrete (1:4:8), 12 mm thick inside cement plaster with finishing, making channels in cement concrete (1:2:4) etc all complete Job.

Providing and Fixing of Manhole covers using angle section 2mm thick M.S sheets including welding with Hindges and placing in position complete.

Supplying and Filling of earth (including ramming, watering, dressing, loading, unloading etc complete as per directions of Engineer incharge at site.

Filling available earth got from excavation including loading , unloading etc complete.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth.

Providing an fixing of aluminium doors , windows , ventilators and position with extruded built up standard tubulor section / appropraite z section and other section of approved make conforming to IS:733 and IS:1285 , fixed with dash fastener of required dia and size including necessary filling of gaps of at junctions i.e at top ,bottom and sides with required EPDM rubber inoprene gasket belt etc.Almuniom section shall be smooth ,rust free straight, mitred and jointed.Mechinically whenever required including cleat angle , Aluminium snap beeding for glazing panelling , CP brass stain less steel screws all complete as per architectural drawings and the directions of Engineer in-charge(glazing , panelling and dash fasteners to be paid for separately)

HORIZON CONSTRUCTIONS

SHEIKH AND SONS

M/S NASEER AHMAD BHAT

M/S DUWA CONSTRUCTIONS

M/S GHULAM MUSTAFA BHAT

ABDUL RASHID SHAH