Loading…
Loading…
Tender Value
₹1.6 Cr
EMD Value
₹2.4 L
Closing Date
7 Jul 2026, 10:30 pm
Similar tender results from the same govt authority in the past 3 years.
Vijayanagara Area Development Authority
CONSTRUCTION OF VADA OFFICE AT TORANAGALLU VILLAGE,SANDUR TALUK,BALLARI DISTRICT
307091
VADA/2026-27/BD/WORK_INDENT3
Open
Buildings
VADA Commissioner Office Vijayanagara
1 document required · 1 mandatory
To Qualify for award of this contract each tenderer in its name should have in the last five years i.e 2021-22 to 2025-26 Satisfactory completed, at least one Similar nature of work i.e construction of Building work of value not less than Rs. 95.03 Lakhs as prime contractor. (Note: Certificate should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent).
Executed in any one year (for a continuous period of 12 months) the following minimum quantities of work. Earthwork / Embankment 518.65 cum, PCC/RCC 324.03 Cum, TMT Steel 31.10 Tonne, Framed work / Structural Steel 1418.61 Kg, Flooring 592.63 Sqm, Solid Concrete Blocks 898.72 Cum.
KPWD Registration Certificate class two and above.
To Qualify for award of this contract each tenderer in its name should have in the last five years i.e 2021-22 to 2025-26 Achieved in at least two financial years a minimum annual financial turnover of Rs.380.12 Lakhs. (Turnover certificate from CA with valid UDIN No. to be furnished along with necessary documents)
Liquid assets and or availability of credit facilities of not less than Rs. 57.02 Lakhs (Unconditional Credit lines/ letters of credit/ certificates from banks for meeting the fund requirement etc).
All Terms and Conditions as per the Tender document.
All Terms and Conditions as per the Tender document.
All Terms and Conditions as per the Tender document.
All Terms and Conditions as per the Tender document.
All Terms and Conditions as per the Tender document.
All Terms and Conditions as per the Tender document.
All Terms and Conditions as per the Tender document.
All Terms and Conditions as per the Tender document.
All Terms and Conditions as per the Tender document.
All Terms and Conditions as per the Tender document.
Upload All Technical Bid Criteria as mentioned in Tender Documents.
Upload All Technical Bid Criteria as mentioned in Tender Documents.
All Terms and Conditions as per the Tender document.
All Terms and Conditions as per the Tender document.
All Terms and Conditions as per the Tender document.
₹4,030
₹2.4 L
18 Jun 2026
18 Jun 2026
9 Jul 2026
1 Jul 2026
25 Jun 2026
CONSTRUCTION OF VADA OFFICE BUILDING (Ground Floor Below Plinth)
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...
Mechanical Means -
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
CONSTRUCTION OF VADA OFFICE BUILDING (Ground Floor Above Plinth)
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of ...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior pai...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...
Providing and fixing chromium plated brass handles of 100/125 mm with
necessary screws etc. complete
Providing and fixing bright finished brass butt hinges with necessary screws
etc. complete : 100x70x4 mm (ordinary type)
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...
Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc. complete.
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc...
Providing and fixing door latch with necessary screws etc complete. - Bright finished brass latch
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Chejjas-Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The gr...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
CONSTRUCTION OF VADA OFFICE BUILDING (First Floor and Head Room)
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Additionalities for Formwork, Centering & Scaffolding 60% for Roof beam
Additionalities for Formwork, Centering & Scaffolding 50% for Roof slab & Stair case
Chejjas-Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The gr...
Additionalities for Formwork, Centering & Scaffolding 45% for Chejjas
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing & fixing of 2.5 x track 2panel sliding windows made out of multi chambered UPVC Matching to RAL-9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer...
Providing and fixing of louvered ventilator made out of multi chambered PVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Forming groove of uniform size in the top layer of plaster as per approved attern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the E...
Forming groove of uniform size in the top layer of plaster as per approved attern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the E...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) ncluding preparing the surface after thorougly cleaning oil, grease, dir...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.Buil...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.Building Schedule rate 2023-24 Volume-II Item ,page no 105,Code-12.62
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete.Building Schedule rate 2023-24 Volume-II,page no107, Item Code-12.75.4
Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws et...
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.Building Schedule rate 2023-24 Volume-II,page no 105, Item Code-12.58
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm.Building Schedule rate 2023-24 Volume-II,page no 105, Item...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing door latch with necessary screws etc complete.Bright finished brass latch.Building Schedule rate 2023-24 Volume-II,page no 108, Item Code-12.80.1
Water Supply and Sanitary
Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous china
flushing cistern & C.P. flush bend with fittings & C.I...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of
fittings and brackets, cutting and making good the...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
IS:13983 with C.I. brackets and stainless steel plug 40 mm, including
painting of fittings and brackets, cutting and making ...
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality
& make and as per the direction of Engineer-in-charge.
Providing and fixing toilet paper holder : C.P. brass
Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class: Economy
Supplying,Installing, testing and commissioning approved make 15mm CP health faucet with CP flexible tube 1.0m long, CP crutch, nozzle angular stop cock with wall flange etc.,complete.
Providing and fixing Angle cock with wall flange made of Stainless
steel with all concealed fitting arrangements & all necessary accesories
complete - Class Economy
Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe a40 mm dia Waste pipe
Supplying, laying, jointing, testing and commissioning approved make UPVC pipes class III 6 Kg/cm2 with solvent cement joints confirming to IS 4985 for pantry sink urinal & wash basin outlets. The qu...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joi...
PVC pipes 110mm dia., 6 kg/sqcm & class 3
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013
with latest amendments ended with integral sockets with ISI mark and
conveying to worksite, rolling and lowering into trenches, laying t...
Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal ex...
Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal e...
Providing and installation of Class SN8 Double Wall Corrugated HDPE
pipe outer wall corrugated and inner wall smooth piping system in
accordance with IS 16098 part 2 and conveying to work site and l...
Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete
Providing and fixing square-mouth S.W. gully trap class SP-1 complete
with C.I. grating brick masonry chamber 150 x 100 mm size P type With
Non Modular common burnt clay bricks of designation 3.5 & ...
Constructing brick masonry chamber of internal dimension 600x600mm
and depth of 600mm (inner dimensions) with modular bricks of CD 75
in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plast...
Constructing brick masonry chamber of internal dimension 600x600mm
and depth of 600mm (inner dimensions) with modular bricks of CD 75
in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plast...
Drilling with core cutting machine in RCC beams, slabs, floors etc., for laying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised repres...
b) 125 mm dia pipe.
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Supplying and fixing of UPVC Rain Water Head with grating (leaf trap with kurra) made out of 6kg/cm2 pvc pipes confirming to IS 4985 for rain water outlets on terrace.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cl...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pip...
External & Shafts & Terrace 25 mm nominal dia Pipes
External & Shafts & Terrace 32 mm nominal dia Pipes
External & Shafts & Terrace 32 mm nominal dia Pipes (CWS PRM)
External & Shafts & Terrace 40 mm nominal dia Pipes
Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :20 mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete25 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of
approved quality (screwed end) :32 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of
approved quality (screwed end)40 mm nominal bore
Providing and fixing gun metal non- return valve of approved quality
(screwed end) : 32 mm nominal bore Vertical
Supplying, installing, testing and commissioning approved make CI Y strainer PN 10 with SS Mesh necessary nuts & bolts etc., complete. 40 mm dia (For OHT) 40 mm dia (For OHT)
Supplying,Installing, testing & commissioning approved make submersible pumps with control panel including overload relays, on-off push button switches, phase indicator lamps, dry run protection r...
Supplying,Installing, testing & commissioning approved make submersible pumps with control panel including overload relays, on-off push button switches, phase indicator lamps, dry run protection relay...
Providing and Fixing Copper Float valve, etc,confirming to I.S.I specifications of approved make as per directions complete.32mm dia for UG Sump
Internal Electrical
Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe . mm dia . thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concre...
Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe . mm dia . thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concre...
Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe . mm dia . thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concre...
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.100 x 75 x 65 mm
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.135 x 75 x 65 mm
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.135 x 160 x 65 mm
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.6Amps one way
Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293 6Amps two way
Stepped fan regulator
s one way switch 16AmpS
universal socket6/16Amps universal socket
universal socket16 Amps
Supplying. rated3phasewithneutralbusbarusingrequiredcapacityelectrolyticaluminiumstripscoveredwithheatshrinkablecolouredPVCsleeve,mountedonphenolic/FRP/DMCinsulatorwhicharemountedonpowdercoated40x6mmM...
Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 1.5 Sqmm
Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 2.5 Sqmm
Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 6 Sqmm
Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 10 Sqmm
Supplyingof.feetVCBattenwithintegratedLEDtube.WwithhighqualitydiffuserwithLifeof25000burninghours&70 PERCENTAGE lumenmaintenancewithCRI GREATER THAN 80.PowerInput:220-240VAT 50/60Hz&Powerfactor GREATE...
Supplying and fixing/replacing of fluorescent tube. 18 to 40W
SupplyofLEDBollardlightfittingof.Wwithpressurediecastaluminiumhousingbodyforoptimalthermaldissipation.LampcompartmentcomprisingofantiglarecleardiffuserwithInjectionmouldedpolycarbonate/clearglassmater...
Supplying&fixingretrofittype-PL-LEDLamp......WLEDlinearsourcewithCCT6500degreeK,CRI70 per enctate .efficacy 80lumenperW,life 25000burninghoursandCompliancetoIS10322/IEC60598,LM779&LM80.TheLEDaredriven...
Supplyofround/squarerecess/surfacemountedrollingtypeLEDDownlightwithWGU10LEDLampRibFabricatedfromdiecastaluminiumwithwhitepowdercoatedprewiredtomainsconnector&hasswivellingunitofaluminiumdiecasteyebal...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles,Single phase AC supply conforming to ISS-374-1979 and with double ball...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12INCH Sweep (300 mm)
Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing a 5 amperes ceiling rose, necessar...
Fixingoneexhaustfanaftermakingasuitablenotchinthewallandfinishingwithcementmortarandcolouringtomatchtheexistingwallorbrackets,withboltsandnutsanda5A,ceilingrosewithsufficientlengthof23/0.0076inchPVCin...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076 INCH twin twisted PVC insulated
Supplying and fixing regular MCB distribution board sonwall/oodboard/ flush mountin gusing required clamps,bolts,nutsetc.,with provision for fixing suitable type capacity MCBs single phase/3phase/sing...
Supplying and fixing regular MCB distribution board sonwall/oodboard/ flush mountin gusing required clamps,bolts,nutsetc.,with provision for fixing suitable type capacity MCB's single phase/3phase/sin...
Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand CTypecurve,indicatorON/OFF,energycross-3withShortcircuitbreakingcapacityof10Kandcompletewiringas...
Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40A 2 pole
Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsandCTypecurve,indicatorON/OFF,energycross-3withShortcircuitbreakingcapacityof10Kandcompletewiringasr...
Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsandCTypecurve,indicatorON/OFF,energycross-3withShortcircuitbreakingcapacityof10Kandcompletewiringasr...
Point wiring using copper wire with Switch. Supplying and wiring adopting loop system in existing PVC Conduit/Casing using 1100V grade, Copper Conductor fleand flexible multistand FRLS PVC insulated ,...
Supplying,erecting,testing&commissioning of OFF-LINEUPS system suitable for operation on 230V,50Hz,A/C supply,with all accessories complete and Excluding batteries and wiring complete. 3 kVA OFF LINE ...
Supplying, installation, testing & commissioning of 12V DC, AH
batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.200 AH capacity
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Documet of VADA Building01.doc
Tender Document • 3.04 MB
Download all tender documents and submit your bid