GE/PNH-36/2021-22

Amount

Schedule 'A' Part-I (Building Work) JOB NO. SHQ/POONCH/REV-01/2021-22(Toilet and Bathroom block)

Total amount of Sch 'A' Part-I (Building work) brought forward from srl page No-20

Schedule 'A' Part-II (Internal Water Supply works) JOB NO. SHQ/POONCH/REV-01/2021-22(Toilet and Bathroom block)

Total amount of Sch 'A' Part-II (Internal Water Supply works) brought forward from srl page No-22

Schedule 'A' Part-III (Plumbing works) JOB NO. SHQ/POONCH/REV-01/2021-22(Toilet and Bathroom block)

Total amount of Sch 'A' Part-III (Plumbing works) brought forward from srl page No-23

Schedule 'A' Part-IV (Sec-I) (Internal Electrification works) JOB NO. SHQ/POONCH/REV-01/2021-22(Toilet and Bathroom block)

Total amount of Sch 'A' Part-IV (Sec-I) (Internal Electrification works) brought forward from srl page No-26

Schedule 'A' Part-IV (Sec-II) (Internal Electrification works) JOB NO. SHQ/POONCH/REV-01/2021-22(Toilet and Bathroom block)

S&F in repair Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings with & including LED lamp 10 watts (B-22 holder), complete all as specified. Make of LED lamp:- Havells cat part No LHlDERUEML8x010 or Equaivalent cat part of make as specified in P.S.

Schedule 'A'Part-V(Sec-I) (Hot Water Supply Works) JOB NO. SHQ/POONCH/REV-01/2021-22(Toilet and Bathroom block)

Total amount of Sch 'A' Part-V (Sec-I) (Hot Water Supply Works) brought forward from srl page No-27

Schedule 'A'Part-V(Sec-II) (Hot Water Supply Works) JOB NO. SHQ/POONCH/REV-01/2021-22(Toilet and Bathroom block)

M&L for chromium plated brass horizontal/ vertical non return valve of size 15mm dia bore ISI marked on inlet side of geyser complete all as specified and directed

Schedule 'A'Part-VI (Sec-I) (Sewage Disposal Works) JOB NO. SHQ/POONCH/REV-01/2021-22(Toilet and Bathroom block)

Total amount of Sch 'A' Part-VI (Sec-I) (Sewage Disposal Works) brought forward from srl page No-29

Schedule 'A'Part-VI (Sec-II) (Sewage Disposal Works) JOB NO. SHQ/POONCH/REV-01/2021-22(Toilet and Bathroom block)

Construction of Septic tank with cover slab of RCC M-25 (Design Mix) for 25 Users, built in brick work in cement mortar 1:4 (With top of slab at ground level) including necessary excavation and earth work in any type of soil, returning, filling and disposal of surplus soil as directed, RCC manhole cover with angle iron welded frame complete vent shaft with cowl, all as shown on drawing No. CE/TD-1202/2003 Sheet 1/2 and 2/2 amended upto date and as directed.

Construction of soakage well 1.80 mtr dia and 3 mtr deep below inlet (depth) from inlet pipe to ground level 45 cm, including excavation and earth work in hard / dense of soil, PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) in foundation, wall in honey combed brick work in CM 1:4, cover slabg of M-25 (Design mix), filling with brick bats, earth cushion on brick lining on top and inlet pipe 150mm dia, complete all as specified and as shown on drawings.

Schedule 'A'Part-VII (External water supply Works) JOB NO. SHQ/POONCH/REV-01/2021-22(Toilet and Bathroom block)

Total amount of Sch 'A' Part-VII (External water supply Works) brought forward from srl page No-30

Schedule 'A'Part-VIII (External Electric supply Works) JOB NO. SHQ/POONCH/REV-01/2021-22(Toilet and Bathroom block)

Total amount of Sch 'A' Part-VIII (External Electri supply Works) brought forward from srl page No-31

Schedule 'A'Part-IX (Path Works) JOB NO. SHQ/POONCH/REV-01/2021-22(Toilet and Bathroom block)

Total amount of Sch 'A' Part-IX (Path Works) brought forward from srl page No-32

Schedule 'A'Part-X (Area Drainage Works) JOB NO. SHQ/POONCH/REV-01/2021-22(Toilet and Bathroom block)

Total amount of Sch 'A' Part-X (Area Drainage Works) brought forward from srl page No-33

Schedule 'A'Part-XI (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only. JOB NO. KG/MW/01/2021-22 (Provn of Protective cage at KG Top), KG/MW/02/2021-22 (Provn of incinerator at KG), SHQ/LBW-01/2021-22 (Provn of solar street light at Poonch)

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel', complete all as specified and directed.

S&F Mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etcand similar works, complete all as specified and directed.

S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for Applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and directed.

Form work to sides and soffits of floor or roof beams, beam haunchings, lintels, cantilevers, shelves including supports, overhangs etc and similar works rough finished complete all as specified and directed.

Surface excavation not exceeding 30cm deep and average 15cm deep and getting out in any type of soil, complete all as specified and directed.

Excavation over area not exceeding 1.5m deep and and getting out in any type of soil, complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:6, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

M&L for Flush pointing to brick wall in cement mortar 1:4, complete all as specified and directed.

M&L for keyed pointing to brick wall in cement mortar 1:4, complete all as specified and directed.

S&F Mild steel work as in hand rails, half round or other stock section or core for wooden hand -rail, straight portion drilled and countrsunk for ballusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screqing etc. wind ties for roof including securing bolts, posts and struts in fencing including cuttings, tops to shapes, as directed, drilling, holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. fixed in repairs, and similar work conforming to Fe-250 Gde E-165 complete all as specified and directed.

S&F Mild steel bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified and directed.

S&F Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, confirming to Fe-410-W (Gde E-250) quality-A complete all as specified and directed.

S&F Mild steel, plain, black sheet 1.25mm thick as in chimney, wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

Removing excavated material (soil) not exceeding 50m and deposition where dircted at a level not exceeding 1.50m above the starting point, all as specified and directed.

Hard core of broken stone/boulders of gauge n exc 63mm deposited spreed and leveled in layers n exc 15cm thick watered and rammed to a true surface, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in base course to floor, finishing surface even and fair to receive floor finishes, complete all as specified and directed.

M&L for Machine pressed chequered cement concrete tiles with chemical resistant coating of size 200x200x 25mm thick laid in floors / path etc. set, jointed and pointed in neat cement slurry with mixture of white & grey cement in equal proportion & no pigment over & including 20mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate), for fixing of hold fast, copings, plinth bands bed blocks kerb or mud stops,rounded or chamfered angles and edges, including necessary form work complete all as specified and directed.

Supply and fixing LED Solar street light fitting 24 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete (Excavation & earth work shall be measured separately) complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation, foundation of poles, stay assy etc for shafts, wells,cesspits, man holes, pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in any type of soil, complete all as specified and directed.

KAY KAY ENGINEERS & CONTRACTORS