Erection of metallic pole 10mtrs for lighting purpose of weigh bridge no. 1, Slurry Pond No. 5 and Check Post / Guard Room near Base Work-Shop (KTC) and rewiring of check post / guard room under Kathara Washery

Amount

Erection of metallic pole / steel tubular pole of length exceeding 10 M but not exceeding 12 M in cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc as required.

Supplying and erection of galvanized ‘D’ iron clamps complete with shackles insulator (100MM X 110MM), G.I bolts and nuts, washers coach screws etc as required.

Wiring for light point /fan point/exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduct, with piano type switch, phenolic laminated sheet, suitable size M.S box and earthing the point with 1.5Sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing followings way, single pole neutral, sheet steel, MCB distribution board, 240 volts, on surface / recess, completed with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB/RCCB/Isolator). I) 2 + 4 way / 6 way, Double Door

Supplying and fixing 5 Amps to 32 Amps rating, 240/415 volts, ‘C’ curve, miniature circuit breaker suitable for inclusive for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. I) Single pole and neutral.

Supplying and fixing of metal box of 150mm x 75mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amp piano type switch, connection, painting etc. as required (for light plugs to be used in non residential buildings.)

Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 1). 15/16 Amps Switch

Providing and fixing of light brackets (angle, clamp, nut and bolts etc.)

Providing and fixing of LED Lamp 9 Watt

Providing of 10 sq.mm aluminium twin core PVC

Laying of 10 sq.mm aluminium twin core PVC

Providing and fixing of PVC Board (4x4) for 15/16amps switch (lighting purpose)

Labour Cost for Fixing of 250watt HPSV light fittings

Total impact of GST for the purpose of CTC

M/S TIGER ENTERPRISES

M/S ATRACON ELECTRICALS