PROVN OF CERTAIN MINOR, REVENUE AND SPECIAL REPAIR WORKS UNDER AGE B/R (CENTRAL), GE WEST COLABA, MUMBAI

Amount

Taking down chowkats or frames with shutters exc 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames) complete all as specified and directed.

S & F powder coated aluminium frame / shutter for door, window, and ventilator of any type including sliding/ hunge type all as directed with one or more rebates including fabrication of frame / shutters and fixing to wall with necessary lugs, cleat etc including all accessories such as glazing clips and rubber beading for fixing of glass panes hinges etc complete all as specified and directed. Note: Glass panes will be measured and paid seperately.

S & F sheet glass 5.50 mm thick ordinary quality and glazing with oil putty or fixed with aluminium beads in square n.exc 1.00 sqm in each pane complete all as specified and directed.

S & F Aluminum deco grill Cat No -104 6mm thick, cut to required size / shape and fixed in position with aluminium beading complete all as specified and directed.

M & L in repairs for Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beading complete all as specified and directed.

S & F Aluminum royal / deco grill RG 100, Mesh size 50X50 mm and 6mm thick, cut to required size / shape and fixed in position with aluminium bedding complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

M & L for Non skid coloured and printed Ceramic tile of size 300x300x6 to 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including Screed bed or bedding layer of cement mortar 15 mm thick in (1:6) complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 450x300x 7 mm thick set and jointed in neat cement slurry and pointing in colour cement to match, over and including rendering in cement mortar 1:4, 10 mm thick as in vertical surfaces such as skirting, dados etc. complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections complete all as specified and directed.

Material and labour for 15mm bore GI pipe, medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.

Taking down chowkat or frame (without taking off shutter from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

S & F in repair vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain , flushing pipe and seat cover etc complete all as specified and directed. Make : Hindware / Prayag sample as approved by GE.

S & F 10 litre capacity PVC low level flushing cistern with all accessories connected with WC including syphone pipe, PVC flushing pipe of suitable size complete all as specified and directed. Make : Hindware / Prayag sample as approved by GE.

S & F in repair water closet seat cover any colour pattern with flat bottom and mild steel chromium plated or aluminium hinging devices complete all as specified and directed. Make : Hindware / Jaguar / Prayag as approved by GE.

S & F in repair vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets, complete all as specified and directed. Make : Hindware / Prayag as approved by GE.

Supply & fix 15mm bore fancy pillar tap, cast copper alloy with capstan head CP screwed down high pressure with or with out letter hot or cold with long screwed shanks and fly nut, screwed for iron pipe complete all as specified and directed.

Supply & fix of PVC connections 15mm size with PTMT nuts of lenth 600mm complete all as specified and directed.

Supply & fix in repairs CI floor trap with grating including jointing to waste pipe with lead joints, 75mm dia complete all as specified and directed.

Supply & fix stop cock (concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union of size 15mm complete all as specified and directed.

S & F Brass chromium plated tabular towel rail 60 cm long 20mm dia including brackets complete all as specified and directed. Make : Jaguar / Prayag as approved by GE.

Taking down PVC drain pipes of 110/75mm dia including all fittings complete all as specified.

S & F in repairs PVC soil, waste and vent pipes 110mm dia, single socketed in any length with rubber joints fixed to wall complete all as specified and directed.

S & F in repairs PVC soil, waste and vent pipes 75mm dia, single socketed in any length with rubber joints fixed to wall complete all as specified and directed.

Supply & fixing of Aluminium anodised barrel tower bolt of extruded section 200 mm long complete all as specified and directed.

Supply & fix butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, 100mm in size complete all as specified and directed.

Supply & fixing Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing of clips of sheet cast or extruded section fixing bolts sliding bolts of extrued section or cast aluminium alloy and fixing 300mm long complete all as specified and directed.

Supply & fixing 150mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed.

S & F Viterous china urinal half stall type coloured including waste pipe and fixing in position complete all as specified and directed.

S & F in repair 15mm CP health faucet with one metre length tube & hook complete all as specified and directed. Make:- Jaquar / Prayag sample as approved by GE.

Supply and fix stainless steel toilets paper holder box type complete all as specified and directed. Make:- Jaquar / Prayag sample as approved by GE.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and directed.

S & F solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top & bottom rail on either side & as gap insert for top rail & botom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the syiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep in soft/loose soil complete all as specified and directed.

M & L for Hard Core of broken stone or boulder of guage n.exc 63mm deposited, spread and levelled in a layer n.exc 15 cm thick watered and well rammed to a true surface complete all as specified and directed.

Removing excavated material and deposited out of MD Land exc 1.50 Km and not exc 15 Km complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard/dense soil complete all as specified and directed.

Material and labour for cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

S & F mild steel work medium weight of any dia of pipe including fabrication and errection complete in tublar trusses/purline and rafter including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-2007 grade St-240 fixing to wooden rafters complete all as specified and directed.

M & L for cement concrete 1:4:8 type D-2 (Using 40mm graded stone aggregate) 75mm thick as in sub base complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M- 35 grade with grey cement and pigment including 40 mm thick sand cushioning layer complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in PCC , kerb, mud stops rounded or chamfered for securing interlocking tiles complete all as specified and directed.

Supply and fix prepainted galvanised aluminium zinc coating GI based trapazoidal profile sheet 0.50mm thick of any colour having tensile strength of 550MPA as in roof covering, fixed to steel frame work with self taping screws all as specified and directed. Note: Steel frame work shall be measured and paid separately.

M & L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm centre to centre to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint complete for any heights as per specifications and as directed.

M & L for PVC gypsum ceiling board / tiles for insulation and acoustic purpose 600 x 600 mm in size fixed in frame work complete all as specified and directed.

M & L for prelaminated particle board exterior grade 12 mm thick prelaminated both sides with decorative choice lamination fixed with screws to aluminium section complete all as specified and directed.

Supply & fix door closer hydraulically regulated, designation No. 3, universal type aluminium (Die cast) body complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge or thickness including roof coverings complete all as specified and directed..

Dismantling wrought iron or mild steel work of any description or any position complete all as specified and directed.

S & F rolled section as in framing for cladding, glazing and and the like fixed angle cleats and connecting plates of grade Fe-410 w complete all as specified and directed.

Supply and fix 1 mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters , drip and straight , flasings ( length and girth as fixed ) with grade of zinc coating 275 complete all a specified and directed.

Taking down cement plastering on brick walls/stone walls/ ceiling etc including racking out of joints hacking for key scrubbing down with water and disposal of rubbish out of the MD land complete all as specified and directed.

Rougheing surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M & L for screed bed or bedding laying of cement mortar (1:6) 15 mm thick for as in floor finishes complete all as specified and directed.

M & L for vitrified ceramic tiles 600x600x 10mm thick (square/rectangular) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of brick work built in CM including all quoins, arches pillars etc and precast articles includings disposal of rubbish out of the MD land complete all as specified and directed..

Material & labour for brick work with Sub class 'B' brick, straight or curved on plan exc 6M mean radius built in CM (1:6) complete all as specified and directed.

Material & labour for 15 mm thick cement plastering in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for cement concrete Type B1,1:2:4, (using 20 mm graded stone aggregates) as in coping including use of formwork etc. complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of weather proof acrylic exterior paint over a coat of primer through authorized applicator complete all as specified and directed. Make: Asian Paints (Apex Ultima) or equivalent in Berger Paints / Nerolac / Shalimar paints as approved by GE.

Supply and fix Stainless steel plate rack of size 24"x36"x10" made of 0.63mm thick stainless sheet, S.S screw and round pipe including fixing on wall with SS screws complete all as specified and directed. Make: Nirali / Prayag / Jaquar sample as approved by GE.

Material and labour for Point wiring, in and including rigid non metallic PVC casing caping, 19/20mm dia suitable size, cutting chases for sinking for concealed boxes for wiring with 1.5sqmm FRLSH PVC insulated, unsheathed, multistranded copper conductor cable single core, 1100 volts grade with flush type metal boxes suitable for fixing switches, sockets and fan regulator etc, white or any colour cover plate with brass screws and cup washers including PVC insulated unsheathed multistranded copper conductor cable of 1.5sqmm as on earth wire connected to common earth and earth dolly as per IS specification and as specified in SSR Part - I complete for one light point/wall fan point/ Exhaust fan/bell point controlled by one switch complete all as specified and directed.

All as per serial no. 64 here-in-before but for ceiling fan controlled by one switch and regulator.

All as per serial no. 64 here-in-before but for one 3 pin socket point 5 Amps on independent board.

All as per serial no. 64 here-in-before but for one 3 pin socket point 5 Amps on same board.

All as per serial no. 64 here-in before but for one socket point 15 Amp with 2.5sqmm PVC unsheathed FRLSH wire along with 2.5sqmm green colour wire as earth continuity conductor connected to common dolly complete all as specified and directed.

S & F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed. Make: Anchor / Fine / SSK sample as approved by GE.

S & F Switch Socket combination 2 / 3 pin 5 Amp complete all as specified and directed. Make: Anchor / Fine / SSK sample as approved by GE.

S & F Switch Socket combination 6/16 Amp 2/3 pin complete all as specified and directed. Make: Anchor / Fine / SSK sample as approved by GE.

S & F stepped type electronic fan regulator 450 watt flush type on the existing phenolic laminated sheet etccomplete all as specified and directed. Make: Anchor / Fine / SSK sample as approved by GE.

Supply and fix calling bell ding dong type 230 volts complete all as specified and directed. Make: Anchor / Fine / SSK sample as approved by GE.

S & F bell push 6 Amp complete all as specified and directed. Make: Anchor / Fine / SSK sample as approved by GE.

Supply & Fix ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed. Make: Anchor / Fine / SSK sample as approved by GE.

Supply and Fix 20 watt LED in repair, 4 feet long fixed on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed. Make:Havells cat pt no LHEXBXPNIN1W020 or equivalent in wipro / philips as approved by GE.

Supply and fix in repair surface mounted 10 watts LED tube light fitting, mirror light fitting with lamp and connecting up with copper 3 core flexible cord of minimum size 0.5 sqmm complete all as specified and directed. Make:- Wipro, Model No : Wipro Garnet 10W LED Batten 6500K or equivalent model in Havells / Philips as approved by GE.

Supply and fix in repair LED 36 Watt fitting, minimum 110 Lumin per Watt, recessed mounted, full glow, slim type, of size 60 cm x 60 cm square type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as specified and directed. Make - Havells (Cat part No - ENDURASLIMPROPLUS2X2 PLR36WLED840MOD) or equivalent model of Wipro Model No LM25-361-XXX-65-G1** / Philips Model No - RC380BLED 34S-6500 L60W60PSDOD-51 / OSRAM as approved by GE.

Bright Construction Co

SHREE JAGDISH FURNITURE CO.

SRI SAIRAM COUNSTRUCTION

Bidder Name

SRI SAIRAM COUNSTRUCTION

RAJU ENTERPRISES

Bright Construction Co

SHREE JAGDISH FURNITURE CO.