SPL PROVN OF STANDBY SUPPLY ELECTRIC CONNECTION AND PROVN OF 50 X SECURITY LIGHTS AROUND HELIPAD BOUNDARY AREA UNDER GE (EAST) MATHURA GE EAST MATHURA

Amount

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil complete.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense of soil.

Returning filling with earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cms thick complete.

Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete.

M&L for sand cushioning to under ground cable in trenches in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling puning of sand.

M&L for hardcore of broken stone or boulders of guage n.exc 63 cm, deposited, spread and leveled in layers n.exc 15 cm thickness, watered and rammed to true surface.

Supply and Laying Unreinforced precast concrete cable cover class LV type 1, size 250mmx150mmx40mm complete as directed.

M&L for 50mm bore steel tubes light grade galvanised with all fittings fixed to walls/ floors/ poles/ road crossing etc sizes complete.

M&L for 40mm bore steel tubes light grade galvanised with all fittings fixed to walls/ floors/ poles/ road crossing etc of following sizes complete:- 40 mm bore

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches / pipes, fixed to poles / walls, fixing with suitable saddle/clamps complete all as directed.

35 sqmm 3.5 core.

50 Sqmm 3.5 core

120 Sqmm 3.5 core

150 Sqmm 3.5 core

M&L for Cable route indicator showing "LT Cable" and route/joint of cable with arrow made of PCC M-15 grade (Nominal Mix) using 20mm graded stone aggregate duly rendered with plaster 10mm thick of size 40x50x20cm, fixed and erected on PCC platform of size 40x40x10cm grouted in ground, duly painted on both side with LT cable route complete all as directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not than 1.5mtr below normal ground level connected to GI earth strip of size 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, PGI funnel, wire mesh and 20mm bore GI water pipe medium grade and 40mm bore medium grade GI pipe for protection of earth strip from plate to main switch board, common salt, charcoal dust including testing on completion complete all as specified and as directed all as shown in electrical plate No. 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost all as directed by Engr-in-Charge. (Note: GI strip beyond 5.0Mtr length from earth electrode shall be measured and paid separately).

Supply & install steel tubular swaged poles type 410 SP 31(9.0 meters long) complete with CI base plate and finial taper plug bolts nuts and screws . Painting with aluminium paint one under coat one finishing coat cover a coat of red oxide primer and making alternate colour bands of black & yellow colours in 30cms widths upto a heihgt of 1.5 mtr from pole coping with synthetic enamelled paint complete. Note: Earth work and PCC shall be measured saperately under respective item.

M & L PCC M-5 graded (Nominal Mix) using 40mm graded stone aggregate as in lean concrete of foundation.

M & L PCC M-7.5 grade (Nominal Mix) using 40 mm graded stone aggregate as in lean concrete for foundation filling and mass concrete all as specified and directed.

M & L PCC M-10 grade (Nominal Mix) using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed.

M & L PCC M-15 graded (Nominal Mix) using 20mm graded stone aggregated as in foundation filling and mass concrete & coping of pole all as specified and directed.

M&L for 150mm thick M-15 graded (Nominal Mix) using 20mm graded stone aggregate as in floors and pavings finished even and smooth without using extra cement

Forming contraction (Dummy) joints 65mm deep x 10mm wide filled with sealing compound grade 'A'.

S&F Rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates.

S&F joints, channels, angle or tee section fixed independently, without connecting plates etc.

Mild steel bolts dia of neck n.exc 12mm, purpose made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 30 cm long.

M&L 0.63mm thick, galvanized, corrugated mild steel sheeting with two corrugation slide lap, (class-8) fixed with 'L' hooks or cranked bolts in lieu of screws, in roof coverings walls etc completre all as specified and directed.

S&F Flat iron as in wind ties for roof including securing bolts, necessary drilling, bolting or riveting etc and similar work, complete all as specified and directed.

M&L for applying two coats of synthetic enamelled paint over a coat of red oxide on steel surfaces over 10 cm width or girth over new steel surfaces etc complete all as specified and directed.

M&L for PCC M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregates as in copings, bed plates kerbs, water throughs and the like including weathering, slightly rounded or chamfered angels and throating as directed.

S& F LED street light fitting 70 Watt pressure die cast aluminium housing and heat resistance with toughend glass cover and instensity of light not less than 7000 lumens with inbuilt seach production device including fixing on poll or any other location all as directed at site new genration energy saving & environmental friendly long life versatile pressure die cast aluminium IP66 roadway luminaiie with with high power LED as light source. Make:- C&S Cat part nu LTESS70WLED/LS

S&F street light bracket made of GI pipe medium grade bend in shape of 50 mm dia, 1.2 m long and clamped with 2 pairs of 30 x 5 mm flat iron clamps, nuts/bolts/washers & painted with 2 coats of aluminium paint over a red oxide primer on clamps complete all as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core

Supply & replacement PVC insulated and sheathed flat twin core solid aluminium conductor cable 1100 volts grade of size 4.0 sqmm complete all as directed.

Supplying, installing, testing and commissioning out door type cubical feeder pillar box suitable for 3 phase, 4 wire, 415 volts, 50 Hz and CPRI approved for 35 MVA rupturing capacity at 415 volts, factory made in an approved factory having seven tank treatment process for powder coating with thickness not less than 60 microns provided with suitable gasket to make it dust / vermin proof & general construction confirming to IS:8623 / 93 mounted on suitable PCC M-15 grade (Nominal Mix) using 20 mm graded stone aggregate foundation comprising of the following complete all as specified and directed. comprising of following (i) MCCB TPN 415 volts 63 Amp. 10 KA --01 Nos (For incoming going). (ii) MCB TPN 32 Amp 10 KA ----02 Nos ( For outgoing) (iii) Copper bus bar 200 Amp for three phase and 100 Amp neutral (iv) Grouting of panel 60cm above GL, embedded in PCC M-15 grade (Nominal Mix) using 20 mm graded stone aggregate up to 30 cm all as directed.

shyam construction

RAJ CONSTRUCTIONS