REPAIR TO DRAINS FENCING HARD STANDING RETAINING WALL SECURITY WALL AND GATE ETC AT SHILLONG CANTT UNDER GE SHILLONG

Amount

Excavtion over areas not exc 1.5 m deep and getting out soft/loose soil complete all as specified and as directed.

Excavation in trenches n.exceeding 1.50m wide and not exceeding 1.5 in depth for foundation etc and getting out as in soft/loose soil complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc.25 cm thick in soft/loose soil complete all as specified and as directed.

Removing of surplus exacavated material (soil) to distance n.exc. 50m and disposing where directed at a level n.exc. 1.5 m above the starting point in soft/loose soil ccomplete all as specified and as directed.

Excavation in post holes (or similar holes) each in any type of soil n. exc. 0.5 cum, getting out, returning filling in an ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm, watering and removing surplus soil to a distance not exc.50m and making good complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description reinforcement cut as required to facilitate demolition complete all as specified and as directed.

M&L for RCC type B-1 1:2:4 (using 20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L RCC M25 (20mm graded aggregates ) as in beam, lintel band over 1.50m span complete all as specified and as directed.

M&L RCC M25 (20mm graded aggregates ) Columns, pillars, piers, posts and struts complete all as specified and as directed.

Formwork to sides of concrete foundations,drains, footings, bases of column, raft and fafts beams, sides and soffits (if any) of fdns and plinth beams, and similar works and fair finished surface complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) incl fair finished surface complete all as specified and as directed.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, miltred/stopped ends etc. complete all as specified and as directed.

S&F TMT bar 10mm dia and over cut to length ,bent to shape required including cranking , bending spirally for hooping column hooking ends and binding with mild steel wire (annealed ) not less than 0.9mm dia complete all as specified and as directed.

M&L for mild steel TMT bars 6 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally in stirrups with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of plain cement concrete in ground floors or above ground floor and paving n.exc 15 cm thickness (Below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded aggregates as in plinth protection including finishing even and smooth without using extra cement complete all as specified and as directed

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm complete all as specified and as directed.

M&L for Plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for Plain cement concrete (1:3:6) type C2 using 40mm graded aggregates as in surface channel and drain, complete all as specified and as directed

M&L for Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates as in cills,lintels upto 1.50 metre clear span , cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, etc. and in similar works including weathering,slightly rounded or chamfered angles and throating and necessary form works, complete all as specified and as directed.

M&L for Plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as drains complete all as specified and as directed.

Demolition of Brickwork/ Stone masonry/ solid concrete block work built in Cement mortar complete all as specified and directed.

M&L for pre-cast PCC solid block walling with cement concrete type C1 (1:3:6, using 20 mm graded crushed stone aggregrates) exc.10cm in width and setting in cement mortar 1:6, complete all as specified and as directed.

M&L walling of Random rubble, uncoursed, polygonal rubble walling brought up to course built in cement mortar 1:4 complete all as specified and as directed.

M&L raised pointing to random rubble stone masonary uncoursed or brought upto course in cement mortar 1:3 complete all as specified and as directed.

Extra over Hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 20mm in lime or sand stone complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from concrete, brick work, masonry etc. and making good disturbed ground complete all as specified and as directed.

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F Mild Steel screws bolts (Machine made) with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with wasahers and square nut, exc. 5 cm and n. exc. 10 cm long diameter of shank 11 to 15 mm complete all as specified and as directed.

S&F as in repair 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe.290.Gde-E-165 complete all as specified and as directed.

M&L Preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and as directed.

M&L Preparation of old steel and iron surfaces exceeding 10cms width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling barbed wire fencing of any description, size, spacing, complete all as specified and as directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Fixing only in repair Galvanised 2 strand steel barbed wire, restraining and fixing to any type of strandard rails straining bolts, including securing staples or steel pins etc. complete all as specified and as directed.

Dismantling fencing wire mesh any type, complete all as specified and as directed.

S&F chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire compelte all as specified and as directed.

Round bars/TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:4) complete all as specified and as directed.

M&L for non skid ceremic coloured tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L for vitrified ceramic tiles (Paving dark shed, 10 mm thick(square /rectangular), polished, area of each tile n exc 0.36 sqm in floor etc , laid over 15 mm thick screed bed 1:6 ,set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete, all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of concrete surface of wall in CM (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surface or previously untreated surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS 15489:2004, alkali & fungal resistant, dirt resistant exterior paint of any shade as ordered (Company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed .

M & L for preparation of new plastered surfaces of walls including cornices, pilasters etc and applying two coats of white washing over a coat of chalk whiting complete all as specified and as directed.

M&L for preparation of old plastered surface or previously treated surface and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS 15489:2004, alkali & fungal resistant, dirt resistant exterior paint of any shade as ordered (Company depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed .

KB Singha and Associates

M/s A L Traders

DWEL ENTERPRISE