REPAIRS TO ROOF TREATMENT, SUNKEN FLOORING, RUSTED PIPE LINES AND CONNECTED WORKS IN N-4, NARENDRA GROUND AND RAMADEVI AT AFS CHAKERI, KANPUR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for rendering 15 mm thick in CM (1:3) Mixed with water proofing compound on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement and applying two coats of master seal to prevent leakage/seepage through sunken floor complete all as specified and directed.

M & L for PCC (1:5:10) type E2, using 40 mm graded stone aggregate as in foundation filling/mass concrete complete all as specified and directed.

M & L for 25 mm thick PCC (1:2:4) type B0, using 12.5 mm graded stone aggregate as in sub base for floor complete all as specified and directed.

M & L for 7 to 8 mm thick non skid ceramic coloured digital tiles (Square/rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

Ditto all as per item No.6.00 above but using as skirting/dado over and including 10 mm thick rendering in CM (1:3) complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M & L for 18-20 mm thick granite (of any type) work (Table rubbed and polished) in steps jambs, pillars, window cills cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

S & F in repairs kitchen sink with drainage board, made of stainless steel, 1.0 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x460 mm bowl size 410 mmx330 mm x 160 mm complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and including cleaning for re-fixing or removal from site complete all as specified and directed.

Ditto all as per item No.11.00 above but 20 mm bore of pipes.

S & F 15 mm bore steel tubing medium grade, galvanized with all fittings and fixed to walls and ceilings or laid in floors of any length complete all as specified and directed.

Re fixing of 15 mm bore steel water tubing and connections in new or old positions to wall and ceiling or laid in floors complete all as specified and directed.

S & F 20 mm bore steel water tubing medium grade, galvanised with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

Re fixing of 20 mm bore steel water tubing and connections in new or old positions to wall and ceiling or laid in floors complete all as specified and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar 1:3, cutting depth not exceeding 10 cm girth complete all as specified and directed.

S & F in repairs 15 mm bore bib cock chromium plated cast copper alloy fancy type with flange of Make-Prayag Cat part No 7606 or equivalent in Cera/Essco complete all as specified and directed.

S & F in repairs 15 mm bore pillar cock chromium plated cast copper alloy of Make- Prayag Cat part No 7602 or equivalent in Cera/Essco complete all as specified and directed.

S & F in repairs 15 mm bore angle cock with flange, cast copper alloy fancy type chromium plated with flange of Make- Prayag cat No 7610 or equivalent in Cera/Essco complete all as specified and directed.

S & F PVC waste pipe 32 mm bore for WHB/sink of Make-Prayag Cat No 327 or equivalent in Cera/Essco, complete all as specified and directed.

S & F in repairs 450 mm long brass chromium plated towel rail of Make-Prayag Cat part No BA-40 or equivalent in Cera / Essco complete all as specified and directed.

S & F in repairs chromium plated soap dish of Make Prayag cat No BA-45 or equivalent in Cera/Essco complete all as specified and directed.

S & F in repair 32 mm dia low density polyethylene pipes with bends etc as required (LDPE) pressure rating @ 6 kg/sqcm, fixed to wall, ceilings or in floors etc complete all as specified and directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of Make Prayag cat No 324 or equivalent make in Cera/Essco as approved by GE complete all as specified and directed.

S & F in repair grating (with or without hole for inserting waste pipe), 140 mm size of PTMT (Minimum weight 50 gms) complete all as specified and directed.

S & F in repairs 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe of Make Prayag cat No 151 or equivalent make in Cera/Essco as approved by GE complete all as specified and directed.

S & F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe (Minimum weight 210 gms) of Make Prayag cat No 152 or equivalent make in Cera/Essco as approved by GE complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required re- connecting and refixing in position of exceeding 250 Ltr & not exceeding 500 liters capacity complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exceeding 250 & not exceeding 500 liters of capacity complete all as specified and directed. Note :- Date of cleaning shall be written on tanks by using stencil letters with 10 cm high with synthetic enamel paint. The rate for the same deemed to be included in quoted unit rate.

S & F in repairs PVC flushing cistern push button type of 10 liter capacity, coloured/White complete with all fittings including PVC flush pipes, brackets etc of make Prayag Cat No 501 or equivalent in Cera/Parryware (Slimline) / Hindware complete all as specified and directed.

S & F in repair vitreous china squatting pan `Orissa ' pan pattern size 580 mm x 440 mm white `P' or `S' trap front back inlet (excluding flushing cistern and flush pipes) complete all as specified and directed.

S & F in repair vitreous china wash hand basin white size 550 mm x 400 mm including bracket but excluding taps, waste pipes, chain and plug etc complete all as specified and directed.

M & L for cast iron floor trap with grating including jointing to waste pipes in PCC (1:2:4) type B-1 using 20 mm graded stone aggregate, 75mm dia outlet complete all as specified and directed.

S & F 100 mm bore cast iron sanitary connection socket fixed to WC outlet etc complete all as specified and directed.

S & F in repair cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors using sand cast CI pipes 75 mm bore pipes etc complete all as specified and directed.

Ditto all as per item No.36.00 above but for 100 mm bore pipe.

S & F in repair PVC internal kit for automatic syphonic action type low level flushing cistern for capacity 10 liters complete all as specified and directed.

S & F in repair lid for PVC tank 500/1000 liter capacity with all arrangements complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame), and removing from site complete all as specified and directed.

S & F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) single side prelam PVC sheet used instead of plain color PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90º, bent edge complete all as specified and directed.

S & F 100 mm size PVC butt hinges of make Prayag cat No 222 or equivalent make as approved by GE complete all as specified and directed.

S & F aluminum anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S & F Aluminum anodised bow handle fabricated type extruded section of 150 mm long complete all as specified and directed.

Taking down/removing of existing water proofing treatment on roof surfaces and wall surfaces complete, including screed bed, mud phuska, PCC, etc racking out joints, hacking for key scrubbing down with water etc, and removing rubbish out of MD land complete all as specified and directed.

M & L for spreading/brushing neat cement slurry @ 3.00 Kg/ Sqm on old concrete surface, laying screed bed 15 mm thick (average) plaster on concrete surfaces in CM (1:4) on roof, mixed with water proofing compound as per manufacturer instruction and finishing the surface even and smooth without using extra cement all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

M & L for PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate for padding concrete as on roof, mixed with water proofing compound as per manufacturer instruction etc complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid separately).

M & L for providing and applying fiber reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having sun reflective Index (SR) of 105 on top of concrete roof in three coats @ 10.76 litre per 10 Sqm. One coat of self priming of elastomeric water proofing liquid (dilution with water in ratio 3:1) and two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete allocation/system not less than 500 microns) shall be applied by mechanical sprayers as per manufacturers’ instructions. The loose particles with wire brushes, complete all as specified and directed. Note : Treatment shall be done through authorised representative of manufacturer's and a sample of the same shall be provided as directed by GE.

Supply only liquid water proofing compound complete all as specified and directed. Note: Ratio of WPC with cement shall be as per manufacturers instructions.

M & L for repair to chajja area not exceeding 2.0 sqm each including plaster in CM (1:3) or PCC type B0 (1:2:4) (using 12.5 mm graded stone aggregate) on top with WPC, benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed.

M & L for repair to chajja area exceeding 2 Sqm but not exceeding 4 sqm each including dismantling of upward facia, cutting of reinforcement, plaster in CM (1:3) or PCC type B0 (1:2:4) (using 12.5 mm graded stone aggregate) on top with WPC, benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed.

M & L for repairing of damaged portion of mouth at terrace / roof surface of rain water pipe by cleaning and repairing to mouth of RWP by using CM (1:3) with mix with liquid WPC & sealed with 85/25 hot blown grade bitumen complete to make joint of rain water pipe and roof surface fully leak proof complete all as specified and directed.

M & L for cleaning of roofs by getting out growing vegetations/grass & brooming down with removing it out of MD land premises including repairing to damaged surface of roof by using CM (1:3) mixed @ 3% WPC & sealed with 85/25 hot blown grade bitumen complete in patch not exceeding 2.0 Sqm each complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings complete all as specified and directed.

S & F 0.50 mm thick coloured galvalume profile sheet in roofing shall be with feed material manufactured from 0.50 mm (minimum) base metal thickness (BMT) minimum 550 Mps yield strength and shall confirm to physical specifications of ASTM-792 or equivalent colour coated galvalume sheet shall have maximum pitch of 250 mm c/c and minimum 28 mm crest depth in length as per site requirement. The steel sheet shall be coated with hot dip metallic aluminium Zinc alloy (55% Aluminium, 43.5% 1.5% silicon) coating AZ 150 as 150 gm/Sqm total on both sides. The contractor shall submit manufacturer's confirming to genuinity of material including base metal thickness must be submitted for approval to GE prior to the installation/fixing. The manufacturer of sheet should submit related documents for expected product services performances of pre-painted metalic sheet as per relevant ASTM/IS. manufacturer's recommended installation methodology, all tyupes of accessories considered for rooting. Fasterns shall be coloured baked enamel supper durable, polyester with silicon coating of film having thickness of minimum 25 micron (Including primer), on top minimum 10 micron (Including primer on interior fance). The paint shall be shade as approved by GE. The sheet shall have wide panes with minimum 2 small stirrening ribs for effectiveness with self-drilling screws as per manufacturer instructions complete all as specified and directed. (Note :- Total thickness of sheet with BMT, AZ 150 coating and panting shall not be less than 0.575 mm)

S & F 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

M & L for 75 mm thick PCC (1:3:6) type C-2, using 40 mm graded stone aggregate as in plinth protection etc finished surface even & smooth without using extra cement complete all as specified and directed.

Demolition of brick work built in cement or cement lime mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M & L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:4) finished fair and even without using extra cement and applying two coats of cement based paint after preparation of surfaces complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:6) finished fair and even without using extra cement and applying two coat of distemper oil emulsion over a coat of primer over and including 1 mm thick wall care putty after preparation of surfaces complete all as specified and directed.

M & L for rendering 10 mm thick after dubbing out average 10 mm thick on irregular face of ceiling in CM (1:4), finished even and fair without using extra cement, including chicken wire mesh fixed with nails or screws etc and applying three coats of white wash on ceilings complete all as specified and directed.

M & L rendering 10 mm thick on fair faces of brick work/concrete on ceiling surfaces in CM (1:3) finished fair & even without using extra cement complete all as specified and directed.

S & F in repairs PVC (SWR) pipe, 110 mm dia, single socketed in any length with rubber ring joints complete all as specified and directed.

Ditto all as per item No 67.00 above but for 75 mm dia.

S & F PVC (SWR) bends 110 mm dia complete all as specified and directed.

Ditto all as per item No 69.00 above but for 75 mm dia.

S & F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylingerical vertical with closed top), three layer with white colour hoisted and fixed in position complete all as specified and directed.

M/S ASM ENTERPRISES

M/S Sahu Enterprises

Lalta Prasad vijay kumar Forwarding Agency

M/S SDS Construction Co.

continentalconstructionco.

Khushi Muskan Engineer & Developer