Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.5 LAccepted-AOC | L1 | Accepted-AOC aoc | |
| 2 | L2₹19.8 L+₹2.8 L (16.5%)Rejected-Finance | L2 | Rejected-Finance 2nd lowest bid | |
| 3 | L3₹19.8 L+₹2.8 L (16.5%)Rejected-Finance BUNGLOW NO 1 RAJPOOT VILLA BARARU ROAD PATKUYI BARARU SAGAR MP 470002 | SAGAR | SAGAR | MADHYA PRADESH | 470002 | L3 | Rejected-Finance 3rd lowest bid | |
| 4 | L4₹24.5 L+₹7.5 L (44.1%)Rejected-Finance NEAR MPEB OFFICE DHANA DISTT SAUGOR MP 470228 | DHANA | SAUGOR | MP | 470228 | L4 | Rejected-Finance 4th lowest bid |
Tender Value
₹24.8 L
EMD Value
₹50,000
Closing Date
26 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAUGOR
GE SAUGOR
SPL REPAIR TO SEWAGE LINE, SOAKAGE WELL, PITS, DRAIN AT CERTAIN LOCATION OTM AND MD ACCN INCLUDING PROVN OF WALL MOUNTED CABINETS UNDER GE SAUGOR
2022_MES_555914_1
GE/SGR/TOK-47 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
SAUGOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAGAR
₹50,000
Yes
7 Nov 2022
4 Oct 2022
28 Oct 2022
4 Oct 2022
26 Oct 2022
16 Oct 2022
Amount
Cleaning of septic tank of any capacity by mechnical means including vaccume suction, taking off suitable capacity fitted with vaccume sunction pump of capacity not less than 15 cum/hr and deposited the sludge and water outside the MOD land complete all as specified and directed upto entire satisaction of Engr-in-charge.
Taking down cement plaster on brick or stone walls, ceiling , chajja etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for brickwork with subclass 'B' old size bricks, straright or curved on plan exc 6m mean radius built in cement mortar 1:4 using bricks of crushing strength not less then 35 Kg/Sqcm including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.
M&L for brick work with subclass 'B' bricks in one brick thick honey comb walling built in CM 1:4 complete all as specified and directed.
M&L for brick bats using subclass 'B' bricks for loose filling in soak wells complete all as per specified and directed.
M&L for cutting into existing manholes for (dia 150mm / 200mm) connecting new or old drains making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed
M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on brick work / Concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.
S&F in replacement 110mm bore PVC(SWR) pipes single soketed in any length with adhesive joints fixed to wall with suitable size mild steel clamps complete all as specified and directed.
S&F in replacement 110mm bore PVC(SWR) pipes single soketed in any length with adhesive joints laid in trenches or in floors complete all as specified and directed
S&F in replacement 75mm bore PVC(SWR) pipes single soketed in any length with adhesive joints fixed to wall with suitable size mild steel clamps complete all as specified and directed.
S&F in replacement 75mm bore PVC(SWR) pipes single soketed in any length with adhesive joints laid in trenches or in floors complete all as specified and directed
S&F in PVC (SWR) bends 110 mm dia complete all as specified and directed.
S&F for PVC (SWR) bends of bore 110mm with acess door complete all as specified and directed.
S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.
S&F PVC (SWR) bends 75 mm dia with acess door complete all as specified and directed.
S&F PVC (SWR) junction single ( single T ) equal or unequal 110mm dia complete all as specified and directed.
S&F PVC (SWR) 110 mm dia junction, with acess door single(single 'T') equal or unequal complete all as specified and directed .
S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.
Demolition of RCC of roof, beams, landing, chajja, cover slabs and similar suspended work complete all as specified and directed.
Demolition of cement concrete of any description and in any position complete all as specified and directed.
M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in slabs supported on walls as in soak well and septic tank etc complete all as specified and directed.. .
M&L for pre-cast Reinforced Cement Concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in cover slab of man hole set in cement mortar 1:4 including demolition of existing broken cover slabs complete all as specified.
M&L for form work to soffits of suspended slabs such as flat or curved roof slabs, floor slabs n exc 200mm thick finished fair or curved concrete surface complete all as specified and directed..
M&L for form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 10cm wide and sides of RCC / PCC bands in walls, horizontal or slopping and similar works fair finished concrete surface complete all as specified and directed..
M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for mild steel round bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending as in manhole covers handles, steps, rungs etc complete all as specified and directed.
M&L for cement concrete 1:4:8 type D 2 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.
Excavation in trenches n exc 1.5 m wide not exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc not exc 10 Sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.
All as per Srl item No.29 above but depth exc 1.50m depth but not exc 3.00m complete all as specified and directed
Removing excavated soil exceeding 500 m distance and n exc 1.50 km depositing where directed at alevel not exc 1.5 metre above the starting point complete all as specified and directed.
Returning ,filling in including spreading ,levelling watering and well ramming with soil in layers n exc 25 cm thick complete all as specified and directed.
S&F HDPE double wall corrugated sewage pipe of 150mm internal bore SN-8 as per IS 16908 Part-II 2013 laid in trenches, jointed and tested as per manufacturer instruction including demolition and breaking up drain pipes (salt glazed ware)/ RCC pipe of 150mm bore pipe set in cement mortar complete all as specified and directed.
S&F HDPE double wall corrugated sewage pipe of 200mm internal bore SN-8 as per IS 16908 Part-II 2013 laid in trenches, jointed and tested as per manufacturer instruction including demolition and breaking up drain pipes (salt glazed ware)/ RCC pipe of 200mm bore pipe set in cement mortar complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in copings/ bands and benching,floors and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.. .
M&L for walling of random rubble, brought up to course well bounded bedded and solidly hearted built in cm 1:4 complete all as specified.
M&L for rendering 20mm thick in CM (1:4) on random rubble stone masonry complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered /stopped ends etc. complete all as specified and directed
S&F second class hardwood plain, solid stright chowkats and frames, wrought, framed rebated on the solid, rounder or chamfered, put together with glue pinned at joints complete all as specified & directed.
S&F 18/19 mm thick pre-laminated paticle board, as in cupboards, shelves, pelmets, etc, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work with all around 12 mm thick teak wooden lipping with polishing cut to required size and fixed to frame complete all as specified & directed.
S&F 75 mm long hasp and staple, safety type aluminium with MS hinge pin incl bolt to hinge plate and fixed with stainless steel screws complete all as specified and directed.
S&F continuous (piano) hinges, width of flaps (when open) 30mm stainless steel, bright finish or electrogalvanised complete all as specified and directed.
S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
EX SERVICE MEN SECURITY AND MAN POWER SERVICES
dipangashu barick and associates
siddhant construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .