PROVN OF SOAK WELLS FOR FOUR MESSES, FIRE POINT SHED, CERTAIN E/M WORKS AT AF STATION MOHANBARI AND SEPTIC TANK AND SOAK WELL AT ALG ALONG UNDER GE (AF) MOHANBARI

Amount

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil & spread the excavated earth upto 50 mtr in surrounding low lying area and leveled not exceeding 1.5 mtr height above starting point complete all as specified and directed

Excavating over areas, exc 1.5 m deep and n.exc 3.00 m deep and getting out in soft/loose soil & spread the excavated earth upto 50 mtr in surrounding low lying area and leveled not exceeding 1.5 mtr height above starting point complete all as specified and directed

Excavating over areas, exc 3.0 m deep and n.exc 4.50m deep and getting out in soft/loose soil & spread the excavated earth upto 50 mtr in surrounding low lying area and leveled not exceeding 1.5 mtr height above starting point complete all as specified and directed

M&L PCC 1:4:8 type D 2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M&L for RCC M-25 Design mix as in foundation,footing,foundation beam,plinth beams,base of columns complete all as specified and directed.

M&L for RCC M-25 Design mix as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius on plan with old size bricks built in CM 1:6 for manhole complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface finished even and smooth without using extra cement mixed with water proofing compound complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Supply only intergral water proofing compound ISI marked complete all as specified and directed.

M&L for Brick work with subclass 'B' bricks, in one brick thick honey comb walling built in cement mortar 1:4.complete all as specified and directed.

M & L for broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

M&L for Formwork to soffit of RCC slabs,such as roof slab,floor slabs, in rough finished surface of concrete complete all as specified and directed.

M&L for Formwork to flat of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter in rough finished surfaces of concrete complete all as specified and directed.

M&L for Formwork for side of pillars, posts, struts, columns in rough finished surface of concrete complete all as specified and directed

M&L for Formwork to edges of concrete flats, breaks in floors, opening in concrete walls,floor and roofs and side of RCC/PCC bands in wall, horizontal or sloping, and similar work all exceeding 20 cm wide in rough finished surface of concrete complete all as specified and directed.

M&L for M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for RCC slabs, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto, but 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for RCC slabs.complete all as specified and directed.

Ditto but 5 mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders complete all as specified and directed.

M & L precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregrate) as in cover slab for drain etc, set in cement mortar (1:4) including necessary form, moulds etc and including taking out/removal of existing unserviceable cover slab form drain complete as specified and directed . (Note:- Reinforcement shall be measured and paid separaterly) complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors including beding, packing under and haunching against the sides of pipe after tyey are laid in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls. complete all as specified and directed

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed. .

Excavating in loose /soft soil in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, all as specified and directed.

S & F rolled mild steel Fe-410- W(GdeE-250) quality A for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

S&F 1.6 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

S & F of Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ridge/ cladding to wall, fixed with self tapping screw (Heavy duty) with in built washers and neoprene & EDPM washers, in roofs, walls etc complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, as in valley gutter, ridge etc fixed with self tapping screws as specified etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 finishing the surfaces fair and even without using extra cement complete all as specified and directed.

M&L Preparation of new plastered wall surfaces and applying two coats of cement base paint on plastered surfaces over one coat of primer complete all as specified and directed.

S&F Wall mount hook for fire Extinguisher welded/ fix to board complete all as specified and directed.

Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in loose /soft soil complete all as specified and directed

M&L for hard core of gauge n.exc 63mm broken stone or boulder deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick Plain Cement Concrete 1:4:8 Type D2 ( using 40 mm graded stone aggregte) as in Pavings complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.(sand cushining for paver blocks)

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

Providing, cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Material and Labour for 150 mm dia RCC pipes class NP2, Single socketed, in any length with rubber ring joints with collars, laid in trenches or in floors complete all as specified and directed.

M& L Plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes of 150mm bore dia, including packing under,and haunching against the sides of pipes after they are laid and tested,complete all as specified and directed.

S &F PVC (SWR) 75mm bore pipe single socketed ,in length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S & F PVC (SWR) vent cowl 75 mm complete all as specified and directed.

S & F PVC (SWR) junction single equel or un equel dia 75 mm complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed.

M&L P.C.C 1:3:6 type C2 (using 40mm graded stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

M&L Formwork for curved surface soffits of suspended slab such as roof slab,floor slab,landings and similar works not exceeding 200 mm thick, finished rough surfaces of concrete.

M&L Precast cement concrete 1:2:4 type B1 type (using 20 mm graded stone aggregate) as in Walls complete all as specified and directed.

M&L Formwork to faces of walls,retaining walls, abutments and similar works Flat fair finished surfaces of concrete omplete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide smooth omplete all as specified and directed.finished.

S & F PVC (SWR) junction single equel or un equel dia 110mm bore complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper cable 1100V grade multistranded FRLS type (Red cable for phase and black cable for neutral connection) drawn in and including minimum 20mm bore medium grade PVC conduit totally concealed in walls/ceiling with tee, bend, elbows, junction box etc. with provision of PVC insulated 1.5 sqmm copper conductor cable ( green colour) as earth continuity wire connected to earth dolly and including sunk cast pressed MS boxes with for fixing switches, sockets, regulator with 3mm thich hylam laminated sheet complete all as specified and directed for One light/ fan/bell point controlled by one 5/6 Amp one way switch complete all as specified and as directed.

Supply and fixing of switch paino, flush type, single pole, one way, 5/6 Amp, 230 Volt, complete all as specified and as directed.

Supply and fixing of ceiling rose, PVC/Polycarbonate surface type 65 x 30mm, three terminals, ISI Marked complete all as specified and directed.

Supply, commissioning and testing double mounted industrial electric Siren Ideal audible range (diametircal) 2 kms, suitable for single phase 220 V supply , frequency 50HZ, aluminum casting,incl controller complete all as specified and directed.

M&L point wiring with 2.5sqmm PVC insulated and unsheathed copper cable 1100V grade multistranded drawn in and including ERW Steel conduit not less than 20mm on wall / ceiling with tee bend, elbows, junction box etc with provn of PVC insulated FRLS 2.5 sqmm copper conductor cable as earth continuity including MS terminal boxes for Flame proof switch socket of any type for fixing switches, sockets regulator etc for Fan point controlled by one switch for one light/ fan/Exhaust fan point controlled by one 15 Amp one way flame proof switch complete all as specified and as directed.

S & Fin Flame Proof Switch rotary type with termination box in LM6 16A single pole 240 V complete all as specified and directed.

Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with min speed 1400 RPM, with, blades, and steel frame and louvers and flexible three core copper conductor cable of suitable size for connecting with ceilig rose to exhaust fan connector complete all as specified and as directed.

Cutting the existing stone/brick masonry wall for fixing the Exhaust fan of any size/sweep including plastering with cementmortar 1:4 and making good surfaces complete all as specified and directed .

S & F Flame Proof Exhaust fan size 380 mm 1440 rpm with, blades, and steel frame and louvers and flexible three core copper conductor cable of suitable size for connecting with ceilig rose to exhaust fan connector complete all as specified and directed. Note: Cutting hole in the existing wall and making good for fix Exhaust fan will measured and paid separately.

S & F PVC insulated single core unsheathed industrial cable of size 1.5 sqmm flame retardant lead free,flame retardant low smoke/FRLSH copper cable complete all as specified and directed.

S&F in rigid non-metallic medium grade PVC conduit 25 mm dia inclusive of boxes (junction/ terminal), tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc omplete all as specified and directed.

Aatrey Builders