Jalgaon Indl.Area and M and R to WSS at Bhusawal G.C. Annual maintenance of various works of water supply scheme for 2026-2027

Repairs & day to day maintenance of distribution network (50 Km) of Jalgaon Industrial Area with all require excavation, replacement of pipe & special, operation of sluice valve in Industrial area, including all duties assigned as & when required etc. as a job for the period of one Calendar Year including all required labour, tools and plants etc complete.

Daily watch and ward of 700 mm dia D.I. K-9 Pure water rising main (18 Km) from W.T.P., Sakegaon to GSR, Jalgaon including operation and maintenance of air -valves, sluice valves, wash out valves etc, preventing tempering of water from air-valves, sluice valves, wash out valves, etc on pipe lines for ensuring smooth operation of water supply to Jalgaon Industrial Area including all required labour, tools and plants etc complete.

Rent for welding set with Generator

Rent for Concrete breaker & Compressor

Rent for poclain

Rent for Crane

Rent for JCB

Truck hire charges upto 20 km

White lead

Providing and laying in situ Ready Mix Cement Concrete grade of trap / granite / quartzite / gneiss metal for RCC works in foundation like raft, grillage, strip foundation and footing of RCC column and steel stanchions including normal dewatering, form work, compaction, finishing and curing including transporting from mixing plant upto distance of 25 km., pouring the concrete at work site for 1.5 M lift above G.L. and 5.0 M lift below G.L., etc. complete. (Excluding reinforcement and structural steel) For Foundation 2) In RCC M-200

Supplying and erecting good ebonite coated 200 mm dia rubber balls for 150 mm dia air valve of shore hardness 90-95 with acid and alkali resistant

Supplying and erecting good ebonite coated 150 mm dia rubber balls for 150 mm dia air valve of shore hardness 90-95 with acid and alkali resistant

P roviding D .I. p ipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi- tion/revision with amendments for Rubber Gaskets. Note: For DI pipe supply from MJP 18% GST would be applicable. Same should be considered for estimation purpose. a) ( IS:8329-2000 Latest Version) D.I. K-7 5) 300mm

Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete. Note : Only SBR Rubber gaskets to be used as per. Only 85 % rate shall be payable till satisfactory Hydraulic testing is given. a) C.I. ‘L.A.‘ Class / Mortar inlined DI K-9/K-7 Without Rubber Rings 7) 300 mm.

Providing and supplying ISI standard M S s pecials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. 6) MS barrels (pipe pieces) locally manufactured (for small quantities)

Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc. Providing and supplying ISI standard welded DI double b)) 350 mm & above dia.

Providing and supplying ISI mark C.I. S&S pipes (push on joints pressure pipes of C.I of following class and diameters confirming to the I.S.specification inclusive cost of jointing materials(Rubber gasket of EPDM Quality) excluding GST levied by GoI and GoM in all respect, Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/site of work,unloading, stacking etc. completed as directed by Engineer –in-charge (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition / revision with amendments for Rubber Gaskets. (Suitable for Tyton / Pig lead joints) a) Class ‘LA‘ 1) 80 mm

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). Dia of Pipe : 700.00 mm (I. D.) Thickness of pipe : 4) 8.00 mm.

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valves - PN -1 (Without by pass) 4) 100 mm.

Providing and supplying D.I. fittings with I SI mark Mechanical j oint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. D.I. FITTINGS (Mechanical Joints) MJ Collar/Coupling 2) 100 mm dia

3) 150 mm dia

6) 300 mm dia

Supply of Labour for various works at Jalgaon water supply scheme.

Daily watch and ward of 350 mm dia D.I. K-9 Pure water rising main (11 Km) from W.T.P., Sakegaon to ESR, Bhusawal including operation and maintenance of air -valves, sluice valves, wash out valves etc, preventing tempering of water from air-valves, sluice valves, wash out valves, etc on pipe lines for ensuring smooth operation of water supply to Jalgaon Industrial Area including all required labour, tools and plants etc complete.

Rent for welding set with Generator

Rent for Concrete breaker & Compressor

Rent for poclain

Rent for Crane

Rent for JCB

White lead

Providing and supplying D.I. fittings with I SI mark Mechanical j oint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. D.I. FITTINGS (Mechanical Joints) MJ Collar/Coupling 2) 100 mm dia

3) 150 mm dia

P roviding D .I. p ipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi- tion/revision with amendments for Rubber Gaskets. Note: For DI pipe supply from MJP 18% GST would be applicable. Same should be considered for estimation purpose. b) ( IS:8329-2000 Latest Version) D.I. K-9 6) 350 mm

Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete. Note : Only SBR Rubber gaskets to be used as per. Only 85 % rate shall be payable till satisfactory Hydraulic testing is given. a) C.I. ‘L.A.‘ Class / Mortar inlined DI K-9/K-7 Without Rubber Rings 8) 350 mm.

Providing and supplying ISI standard M S s pecials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. 6) MS barrels (pipe pieces) locally manufactured (for small quantities)

Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc. Providing and supplying ISI standard welded DI double b) 350 mm & above dia.

Providing and supplying ISI mark C.I. S&S pipes (push on joints pressure pipes of C.I of following class and diameters confirming to the I.S.specification inclusive cost of jointing materials(Rubber gasket of EPDM Quality) excluding GST levied by GoI and GoM in all respect, Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/site of work,unloading, stacking etc. completed as directed by Engineer –in-charge (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition / revision with amendments for Rubber Gaskets. (Suitable for Tyton / Pig lead joints) c) Class ‘B' 1) 80 mm

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). Dia of Pipe : 350.00 mm (I. D.) Thickness of pipe : 4) 8.00 mm.

Supplying and erecting good ebonite coated 100 mm dia rubber balls for 100 mm dia air valve of shore hardness 90-95 with acid and alkali resistant

Providing and laying in situ Ready Mix Cement Concrete grade of trap / granite / quartzite / gneiss metal for RCC works in foundation like raft, grillage, strip foundation and footing of RCC column and steel stanchions including normal dewatering, form work, compaction, finishing and curing including transporting from mixing plant upto distance of 25 km., pouring the concrete at work site for 1.5 M lift above G.L. and 5.0 M lift below G.L., etc. complete. (Excluding reinforcement and structural steel) For Foundation 2) In RCC M-200

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valves - PN -1 (Without by pass) 4) 100 mm.

Please Enable Macros to View BoQ information