SPECIAL REPAIR OF BUILDING NO P-1396, P-1405 AND REV WORK AT CERTAIN UNIT UNDER GE (A) JAISALMER AT MIL STN JAISALMER

M&L for Non - skid colored ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. by fixing with 6-8mm thick bedding of TYPE2 tile adhesive Make: Ultratech TileFixo range and pointed in epoxy grouing only for laying floor finishes including dismantling of wall tiling including backing coat if any, complete all as specified. Note : Work will be in patches or in bulk all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set, by fixing with 6-8mm thick bedding of TYPE2 tile adhesive Make: Ultratech TileFixo range set and pointed in epoxy grouting. incl dismantling of wall tiling including backing coat if any, removing rubbish off the premises all as specified and directed

M & L for double charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set in neat cement , including 6-8mm thick bedding of TYPE2 tile adhesive Make: Ultratech TileFixo range and pointed in white coloured cement to match, in floors etc.dismantling floor, removing rubbish off the premises and other necessities of job complete all as specified. Note : Work will be in patches or in bulk all as specified and directed

All as per item No 3.00 here-in-before but as in skirting, steps etc in vertical surfaces with 6-8mm thick bedding of TYPE2 tile adhesive, complete all as specified

M & L for Chipping of 25-30 mm average thickness unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead. further applying polymer based bond coat on the prepared old surface of concrete /masonry to receive new polymer mortar/polymer modified mortar with two coats of approved make as per manufacturer specifications. Laying of polymer modified mortar shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. further applying to the damaged concrete portion of slab / columns / beams / chajjas / parapet / roof projection/ balcony/ staircase with single component, fiber reinforced, dual shrinkage- compensated thixotropic, cementitious patch repair polymer modified mortar approved make (having the technical parameters mentioned in material specifications) capable of applying up to 25-30 mm thick in single layer initially by hand and finishing with troweled carefully compacting the same around the rebar and finishing to bring it in line with existing concrete surface with an average specified thickness. its material consumption is 50kg/sqm for 25-30 mm thickness, all as specified and directed as Engineer-in-Charge. Note : The quoted rate by the contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20 mtr height.

M & L for Chipping of 5-10 mm average thickness unsound/weak concrete material from slab with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead. further applying polymer based bond coat on the prepared old surface of concrete /masonry to receive new polymer mortar/polymer modified mortar with two coats of approved make as per manufacturer specifications. Laying of polymer modified mortar shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. further applying to the damaged concrete portion of slab/ chajjas / roof projection with single component, fiber reinforced, dual shrinkage- compensated thixotropic, cementitious patch repair polymer modified mortar approved make (having the technical parameters mentioned in material specifications ) capable of applying up to 25-30 mm thick in single layer initially by hand and finishing with troweled carefully compacting the same around the rebar and finishing to bring it in line with existing concrete surface with an average specified thickness. its material consumption is 50kg/sqm for 25-30 mm thickness, all as specified and directed as Engineer-in-Charge. Note : The quoted rate by the contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20 mtr height.

S&F chicken mesh wire netting 25 gauge supplied and fixed on wall ceiling with nails complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Complete removal existing treatment and applying 1mm thick of Birla white wall care putty to achieve smooth surfaces and applying two coats of Distemper acrylic emulsion of approved shade/tint over a coat of compatiable priming paint complete all as specified and as directed.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.