Repairs to wooden furniture and sofa set at Tibri Mil Stn.

Amount

REPAIR AND POLISHING TO CHAIR DINING (FD-1105 & FD-228) Removing of old unserviceable front leg replacing by new Shisham wood leg of 46 cm length, 45 x 45mm on top and 25 x 25mm at bottom with fine finish as per drg, as specified and as directed.

All as per Srl item No 2 above but rear leg 890 mm length, 25 x 25mm at bottom.

All as per Srl item No 2 above but side/ front/ rear rails of cane seat with3mm dia hole for re-canning.

All as per Srl item No 2 above but back bottom of size 45x19x440mm.

All as per Srl item No 2 here-in-before but stiffener of size 45x19x215mm.

M&L for polishing of chair dinning complete all as per drg, as specified and directed.

Re-canning of chair dining with half round plastic cane of 2mm wide best quality woven in Godrej pattern with 4mm wide plastic cane all around border all as shown on drg and as specified.

REPAIR AND POLISHING TO CHAIR WOODEN BOTTOM (FD-56 & FD-225) Removing of old unserviceable front leg and providing new Shisham wood leg of 46cm long 45 x 45 mm on top and 25 x 25mm at bottom with fine finish complete all as per drg, as specified and as directed.

All as per Srl item No 8 above but rear leg of size 815mm long, 40mm at top and 25mm at bottom.

All as per Srl item No. 8 above but seat made of 6mm thick ply wood commercial complete all as per drg, as specified and directed.

All as per Srl item No 8 about but front /rear/ side rail with new Shisham wood rail of size 25 x65 x 415 mm.

All as per Srl item No. 8 here-in-before but back bottom with new Shisham wood rail of size 25 x65 x 415 mm.

All as per Srl item No 8 here-in-before but stiffener for chair wooden bottom of size 45 x 19 x 215 mm.

M&L for polishing of chair wooden bottom complete all as per drg, as specified and as directed.

REPAIR TO CHAIR WRITING WITH CUSHION (FD-1107) Removing of old unserviceable front leg and S&F new Shisham wood legs reasonbaly seasoned as shown on drg and specified.

All as per Srl item No 16 above but rear leg.

All as per Srl item No 16 above but side/front/rear rail legs.

All as per Srl item No 16 about but stiffner

Removing of UNSV bottom of chair writing with cushion and S&F new seat bottom consisting of 50mm from and cotton newar duly covered with best quality lathersied item in black colour complete all as shown on drg and specified.

All as per Srl item No 20 here-in-before but back seat foam thickness is 25mm.

M & L for polishing of chair writing with cushion complete all as per drg, as specified and directed.

REPAIR AND POLISHING TO CHAIR EASY (FD-202 & FD-250) Replacement of old unserviceable legs with new Shisham wood legs well seasoned free from shake and knots complete all as per drg, as specified and directed

All as per Srl item No 23 above but side/front/rear rails of cane seat with 3mm dia hole for Recanning.

All as per Srl item No 23 above but back bottom size 480 x 20 x100mm

All as per Srl item No 23 here-in-before but stiffener of sizes 50 x 25 x 500mm.

All as per Srl item No 23 here-in-before but arms of size as shown on drg.

M&L for polishing to chair easy complete all as per drg, as specified and as directed.

Re- canning of Chair Easy with half round plastic cane of 2mm wide best quality woven in Godrej pattern with 4mm wide plastic cane all around border all as shown on drg and as specified.

REPAIR AND POLISHING CHAIR WRITING (FD-20, FD-202 & FD-250) Replacement of old UNSV front legs by providing well seasoned shisham wood free from shake and knots complete all as per drg as specified and directed.

All as per Srl item No 30 above but rear legs

All as per Srl item No 30 above but side/front/rear rails of cane seat including making 3mm dia holes for re-canning .

All as pe Srl item No 30 above but back bottom of size 45 x 15 x 400mm.

All as pe Srl item No 30 above but stiffeners of size 25 x 19 x 500mm

All as pe Srl item No 30 above but arms.

M&L for polishing of chair writing complete all as per drg, as specified and directed.

Re-canning of chair writing with half round plastic cane of 2mm wide of chari writing best quality plastic cane all around border all as shown on drg and as specified.

REPAIR & POLISHING TO TABLE DINING FOR 6 PERSONS (FD-30, FD-239 & FD-1115) Replacement of old unserviceable top by providing new 18/19mm thick MDF board commercial pasted with laminated sheet teak face 1mm thick including 3mm thick teak wood edging around complete all as shown on drg as Specified and as directed.

Replacement of old unserviceable leg with new shisham wood leg well seasoned free from shake and knots complete as per drg, as specified and as directed.

All as per Srl item No 38 above but top long rail.

All as per Srl item No 38 above but top short rail.

M&L for polishing of table dinning for 6 persons complete as shown on drg, as Specified and as directed

TABLE DINING FOR 8 PERS (FD-239, FD-30 & FD-1115) Replacement of old unserviceable top by providing new 18/19mm thick MDF board commercial pasted with laminated sheet teak face 1mm thick including 3mm thick teak wood edging around complete all as shown on drg as Specified and as directed.

Replacement of old unserviceable leg with new shisham wood leg well seasoned free from shake and knots complete as per drg, as specified and as directed.

All as per Srl item No 43 above but top long rail.

All as per Srl item No 43 above but top short rail.

M&L for polishing of table dinning for 8 persons complete as shown on drg, as specified and as directed.

REPAIR AND POLISHING TO TABLE 900X600X760MM WITH AND WITHOUT DRAWERS (FD-41, 55, 223 & 224) Replacement of old unserviceable top by providing new 18/19mm thick MDF board commercial pasted with laminated sheet teak face 1mm thick including 3mm thick teak wood edging all round complete all as shown on drg as Specified and as directed.

Replacement of old unserviceable leg with new Shisham wood leg well seasoned free from shakes and knots all as per drg, as specified and as directed.

All as per Srl item No 48 above but top long rail.

All as per Srl item No 48 above but top short rail.

All as per Srl item No 48 above but stiffener.

Replacement of old and broken drawers of table by providing new drawers complete all as per drg and specified and as directed made out of 18/19mm thick block board at the sides and the bottom of the drawers shall be of 6mm plywood commercial type complete duly fitted with fancy type approved knobs complete all as specified and as directed and as shown on drawing

M&L for polishing to table 900X 600 X 760mm without and with drawer complete all as specified, as directed and as shown on drawing.

REPAIR AND POLISHING TO TABLE CENTRE (FD-29, FD-152, FD-224 & FD-375) Replacement of old unserviceable top by providing new 18/19mm thick MDF board commercial pasted with laminated sheet teak faced 1mm thick including 3mm thick teak wood edging all round complete all as per drawing, as specified and as directed

Replacement of old unserviceable legs with new Shisham wood leg well seasoned free from shakes and knots complete all as per drg and as directed and as specified.

All as per Srl item No 55 above but long rail.

All as per Srl item No 55 above but short rail.

M&L for polishing to table centre complete all as shown on drg, as specified and as directed

REPAIR AND POLISHING TO TEAPOY (FD-34, FD-232, FD -292 & FD-278) Replacement of old unserviceable top by providing new top of 18/19mm thick MDF board commercial type pasted with laminated sheet 1mm thick teak faced including 3mm thick teak wood edging all-round complete all as per and as directed

Replacement of old unserviceable legs with new Shisham wood legs well seasoned free from shakes and knots complete all as per drg and as directed and as specified.

All as per Srl item No 60 above but long rail.

All as per Srl item No 60 above but short rail.

All as per Srl item No 60 above but stiffener .

M&L for polishing to table teapoy complete all as shown on drg, as Specified and as directed

REPAIR AND POLISHING TO TABLE PEG (FD-25 & FD-236) Replacement of old unserviceable top by providing new top of 18/19mm thick block board commercial type pasted with 1mm thick laminated sheet teak faced including 3mm thick teak wood edging all round complete all as directed, as specified and as shown on drawing.

Replacement of old unserviceable legs with new Shisham wood legs well seasoned free from shakes and knots complete all as per drg and as directed and as specified.

All as per Srl item No 66 above but long rail.

All as per Srl item No 66 above but short rail.

M&L for polishing to table peg complete all as shown on drg, as Specified and as directed

REPAIR & POLISHING TO TABLE DRESSING GENTS (FD-230(M) & FD-379 (M) Removing of old unserviceable broken top of table dressing gents by providing new top of table of 18/19mm MDF board pasted with 1mm thick laminated sheet teak faced complete all as specified, as directed and as shown on drawing

Replacing of old drawer of table dressing gents with fancy knob and S&F new of the same complete all as specified, as directed and as shown on drawing

Supply only looking mirror 5mm suitable for dressing table gents duly covered with 6mm thick ply wood commercial back including 3mm thick teak wood edging all round and back supporting of mirror duly completed by teak wood bedding with two hocks for hanging of looking mirror as per sample (mirror should not less than 5mm thick and free from bubbles and flanges etc ) complete all as per drg, as specified and as directed.

Replacing of old unserviceable back and sides with new one made out of 12mm thick plywood commercial of table dressing gents complete all specified as direcd and as shown on drawing.

M&L for polishing to table dressing gents complete all as shown on drg, as directed and as specified.

REPAIR AND POLISHING TO TABLE DESSING LAIDES (FD-251 (M) Replacing of old unserviceable broken top of table dressing ladies by providing new top made of 18/19mm thick block board pasted with laminated sheet 1mm thick teak faced complete all as per drg, as specified and as directed.

Removing of old unserviceable broken side /back of table dressing ladies supply & fix with new ply wood 12mm commercial complete as per drg, as specified and as directed.

Replacement of old unserviceable drawer by providing new drawer made of bottom with 6mm thick ply wood commercial and sides of 18/19mm block board with aluminium fancy knob complete all as per drg as specified and as directed

Replacing of old broken glass shutter 5mm thick of suitable size complete all as per drg, as specified and as directed .

Replacing old unserviceable legs with new legs of Shisham wood complete all as specified, as directed and as shown on drawing

Supply only looking mirror covered with 6mm ply wood commercial on back including suitable Shisham wood edging all round complete as per sample (Mirror should not less than 5mm thick and suitable for dressing table ladies all as per drg) complete all as specified, as directed and shown on drawing.

Removing old unserviceable channel by providing new aluminium channel of suitable size for glass shutter of dressing table ladies complete all as per drg, as specified and as directed

M &L for polishing to table dressing ladies complete all as shown on drg, as specified and as directed.

REPAIR AND POLISHING TO TABLE BED SIDE (FD-276, FD-248) Removing of old unserviceable leg and S&F with new Teak wood (MP) leg 40 x40mm reasonably seasoned free from shapes and knots complete all as shown on drg and specified.

All as per Srl item No 84 above but top fixing new top 12mm thick teak wood size- 450 x230mm wide complete all as per drg, as specified and as directed

Removing of old unserviceable back 6mm thick plywood and fixing new 6mm thick plywood commercial complete all as per drg, as specified and as directed

Removing of old unserviceable bottom teak wood and new bottom teak wood all complete all as per drg as specified and directed. complete all as per drg, as specified and as directed.

M&L for polishing to table bed side complete all as per drg, as specified and as directed

REPAIR AND POLISHING TO BED PLYWOOD TOP/BED NEWAR (FD-245, FD-246 & FD-247) Removing of old unserviceable head board with legs and S&F new head board made of Shisham wood covered with plywood 4mm thick one side teak faced on front side and 6mm thick commercial plywood on back of head board and legs of Shisham wood including 4 Nos FMN clamps and polishing complete all as specified as shown on drg and as directed

All as per Srl item No 89 above but foot board complete.

Removing of old unserviceable long rail and S&F new Shisham wood long rail of suitable size complete all as shown on drg and as specified and as directed

Removing of old unserviceable top and S&F new top of 12mm thick ply wood commercial BWR with screws complete all as directed as shown on drg and as specified.

Removing old unserviceable stiffeners and S&F new stiffeners of chair wood (natural seasoned) of suitable size of making necessary grooves in long rail complete all as shown on drg as directed and as specified

S&F in replacement MS clamps of size 40mm width x 4mm thick x 300mm long manufacturing in L shape incl 2 holes on both sides for fixing to locking the head/ foot board with long rails complet all as specified and directed.

CHAIR VARANDAH ( FD-256, FD-19) Recanning of chair varandah with half round plastic cane 4mm wide best quality in Godrej pattern as shown on drg including two coats of white synthetic enamel paint to chair varandah complete all as specified and directed (Painting to chari will be carried out before recanning).

S&F hard rubber shoes suitable for chair varandah complete all as specified and directed.

M&L for welding to chair varandah where required n. exc 2.5 cm in length complete all as specified and directed.

REPAIR & POLISHING TO TABLE WRITING (FD-33 (M), FD-249) Removing of old unserviceable top and S&F new top of 18mm thick block board commercial pasted with plastic laminated sheet teak face 1mm thick including 3mm thick teak wood edging all round complete all as shown on drg directed and specified.

Removing of old unserviceable legs and S&F new Shisham wood leg ( reasonably seasoned) free from shakes and knots complete all as per drg directed and specified

Removing of old unserviceable drawers of table and S&F new drawers ( front and sides of the drawers shall be of Shisham wood planks 18mm thick) and bottom and back shall be of 6mm thick plywood commercial complete all as shown on drg directed and specified .

Removing of old unserviceable shutter and S&F new shutter of 18mm thick MDF block board commercial pasted with plastic laminated sheet 1mm thick teak faced fitted with piano type hinges complete all as shown on drg directed and specified .

S&F fancy aluminium anodized knob 25mm size of best approved quality fitted to drawer/ shutter of table complete all as specified and directed.

Removing of old sides of table writing and S&F new sides made of 18mm thick teak face block board complete as shown on drg directed and specified.

All as per Srl item No 98 here-in-before but back of table writing.

All as per Srl item No 98 here-in-before but bottom of table writing.

Replacement of old unserviceable locks of shutters and drawers of table writing duly approved by GE complete all as shown on drg directed and specified.

Polishing of table complete all as shown on drg directed and specified .

SOFA SETS (FD -18 (M), FD -234 S&F tapestry cloth for sofa set with arms complete all as specified and directed. Note :- Tapestry cloth shall not be less than costing of Rs. 200/- per running mtr and shall be approved by GE.

All as per Srl item No 108 above but sofa set with out arms.

S&F hessian cloth, long cloth sesicord for sofa set with arms complete all as specified and directed.

All as per Srl item No 110 above but sofa set with out arms.

S&F GI springs copper plated of 10 gauge 150mm long complete all as specifeid and directed.

All as per Srl item No 112 above but 100mm long

Repair to frame of seat base of sofa set with and without arms complete all as specified didrected and as shown on drg.

All as per Srl item No 114 above but back of sofa set.

All as per Srl item No 114 above but arms of sofa set with arms as shown on drg.

Replacement legs of sofa sets made out of teak wood and applying french polish complete all as specified and directed.

CHARPOY FOLDING IP (FD-1119) Replacing of charpoys folding IP Nylon Newar with commercial plywood top of 12mm thick plywood BWR ISI Marked of best quality ( after applying of two coat of OG paint to steel surface) closely complete all as specified and directed by Engineer-in-Charge. M&L for welding 2 Nos of MS flat 25mm x 4mm x 900mm long to be welded at different points of the charpoy to support the plywood sheet. fix plywood sheet with 10 Nos nuts bolts (GI) 75mm long 6 mm dia with washer after making in the charpoy at different points complete all as specified and directed by Engineer-in-Charge.Make :- Kit ply, Archid, Green ply, Century.

REPAIR TO POLISHING TO SOFA SET 3 PIECES FOR FIVE (ONE THREE SEATER & TWO SINGLE SEATER (FD-258, FD-281 & FD-1113) Removing of old unserviceable front long rail of three seater piece bottom and S&F new shisham wood long rail of suitable size free shake and knots complete all as specified shown as per drg and directed.

All as per Srl item No 119 above but single seater

Removing of old unserviceable front long rail of three seater piece bottom and S&F new shisham wood long rail of suitable size free shake and knots complete all as specified as on whown on drg and directed.

All as per Srl item No 121 above but short rail.

All as per Srl item No 121 above but back long rail.

All as per Srl item No 121 above but battens.

All as per Srl No 121 above hand rest of three seater piece and single seater

Supply of cushion covered 100 mm thick with best quality tapestry cloth for sofa set 3 pieces having sitting capacity for five (one three seater and two single seater) complete all as per drg directed and specified (Make of cushion sleepwell/ Kurlon of 40 density). Note:- 1. Tapestry cloth shall not be less than costing of Rs.200/- RM and shall be approved by GE . 2. The unit each set comprises of 10 No cushions (5 for seats and 5 for back).

Supply of cover of cushion made out of best approved quality tapestry cloth complete all as specified and directed. Note :- Tapestry cloth shall not be less than Rs. 200/- RM and shall be approved by GE.

TABLE COMPUTER (FD-E6/MAP/03) S&F in repair Top of Table computer Made out of MDF board 18 mm thick (exterior grade) all as per drawing and as directed by Engineer-in-Charge.

S&F in repair side of table computer made out of MDF board 18mm thick (exterior grade) all as per drawing and as directed by Engineer-in-Charge.

S&F in repair base of key board tray all as per drawing and as directged by Engineer-in-Charge.

S&F in repair drawer (assy) Made out of Prelaminated particle board (Both side teak face) 18mm thick (exterior grade) with telescopic channel with arm anodised knobs all as per drawing and as directed by Engineer-in-Charge.

Allied International

GIAN SINGH AND SONS

Harson Enterprises