REPAIR TO CERTAIN ROADS UNDER AGE BR III AT FORT AREA NAGPUR UNDER GE KAMPTEE

Amount

Demolition of cement concrete in ground floor & pavings not exc 15cm thick (below or above ground level) complete all as specified and directed.

Material and labour for PCC (1:4:8) type D2 (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for polythene film, 150 micron thick, laid on sub base surface complete all as specified and directed.

Material and labour for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using minimum 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound 'A' complete all as specified and directed.

Forming 10mm thick expansion joints filled with pre formed bituminious filler and top 30mm primed and sealed with sealing compound and sealed with sealing compound grade 'A' for 250mm thick slab complete all as specified and directed.

Material and labour for Finishing surface of concrete roads, pavements, by brooming complete all as specified and directed.

Material and labour for glazed Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid over a layer of fine river sand, watering and consolidating complete all as specified and directed. (Note: Sand will be measured paid for seperately under respective item supplied only).

Supply only river bed fine sand for screed bed for paving flooring complete all as specified and directed.

Material and labour for PCC floors/hard standing laid in bays type B-1, 1:2:4 mix 100mm thick finished even and smooth with out using extra cement using XPM impression with concrete green including necessary formwork complete all as specefied and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Material and labour for preparation of new concrete surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Material and labour for preparing existing black top surfaces surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleared surfaces with gunny bag to remove all loose dirt etc complete all as specified and directed.

Material and labour for applying evenly a priming tack coat with bituminous primer by using paving bitumen of V-10 grade @ 5 kg/10 Sqm complete all as specified and directed.

Material and labour for laying, srpeading 30mm thick (consolidated thickness) Bituminous premix semi dense asphaltic concrete with 5.5% binder content of bitumen of VG-30 grade by weight of total mix, made with self propelling mechanical paver, rolled and consolidated to required camber and gradient with 8 to 12 tonne power roller to a uniform smooth surface complete all as specified and directed.

Material and labour for Repair to potholes any depth, not exc 1 sqm each including sweeping, with mechanical equipment, and making the surface free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc.by using preassure air, cutting around edges to at least 25mm in depth making good by applying tack coat at 5 kg per 10sqm, puttingpremix asphaltic semi-dense concrete with 5.5% binder content (Paving bitumen any penetration of grade VG-30) by weight of total mix, rolled and compacted, depth of potholes exc 30mm using paving bitumen complete all as specified and as directed.

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises complete all as specified and directed.

Material and labour for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement plaster in cement mortar 1:6 , finished complete all as specified and directed.

Material and labour for Preparation new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Material and labour for hot applied thermoplastic road marking compound minimum 2.5mm thick, using indegeneous modern propeller road marking machine including reflectorising glass beads @ 250gms per sqm area, thicknessof 2.5mm is exclusive of surface applied glass beads, as per the code of practice for road marking paints, white with hot thermoplastic road marking compound all as directed including all materials and labour, brushes, tools, equipment, fuel etc and on roads pavements complete including applying paints in lines, dashes, arrows etc colour confirming to BS 3262-1989 complete all as specified and directed. Note:- Road marking paint shall be carried out in accordance with manufacturer's instructions and as specified in particular specifications.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed.

Supply and fixing in repair metal tubular delineator made out of ABS round body fitted made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 brands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for relector protection including embeding in PCC 1:2:4 (150 x 150 x 300mm) type B1 complete all as specified and directed.

NOTE : SCHEDULE OF CREDIT (Amount on page No 34 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance.)

LAL AND SONS (BID ID -3110258)

chronicle enterprises (BID ID -3111266)

Bidder Name

chronicle enterprises

Devika Constructions

LAL AND SONS